Whilst according to the Zynq TRM this device covers a register region of
0x000 - 0x120. The register region is also shared with XADCIF prefix
registers at 0x100 and above. Due to how the devcfg and the xadc devices
are implemented in QEMU these are separate models with individual mmio
regions. As such the region registered by the devcfg overlaps with the
xadc when initialized in a machine model (e.g. xilinx-zynq-a9).

This patch fixes up the incorrect region size, where
XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in
size. As well as setting the region size to the 0x0 - 0x100 region so
that an xadc device instance can be registered in the correct region to
pair with the devcfg device instance.

Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118:
  dev: xlnx.ps7-dev-cfg, id ""
    mmio 00000000f8007000/0000000000000460
  dev: xlnx,zynq-xadc, id ""
    mmio 00000000f8007100/0000000000000020

Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4:
  dev: xlnx.ps7-dev-cfg, id ""
    mmio 00000000f8007000/0000000000000100
  dev: xlnx,zynq-xadc, id ""
    mmio 00000000f8007100/0000000000000020
Signed-off-by: NNathan Rossi <nathan@nathanrossi.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 20160921180911.32289-1-nathan@nathanrossi.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new function load_image_targphys_as() that allows the caller
to specify an AddressSpace to use when loading a targphys. The
original load_image_targphys() function doesn't have any change in
functionality.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 87de45de7acf02cbe6bae9d6c4d6fb8f3aba4f61.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new function load_uimage_as() that allows the caller to
specify an AddressSpace to use when loading the uImage. The
original load_uimage() function doesn't have any change in
functionality.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1254092e6b80d3cd3cfabafe165d56a96c54c0b5.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a new function load_elf_as() that allows the caller to specify an
AddressSpace to use when loading the ELF. The original load_elf()
function doesn't have any change in functionality.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 8b5cefecdf56fba4ccdff2db880f0b6b264cf16f.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When loading ROMs allow the caller to specify an AddressSpace to use for
the load.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 85f86b94ea94879e7ce8b12e85ac8de26658f7eb.1474331683.git.alistair.francis@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If the caller didn't specify an architecture for the ELF machine
the load_elf() function will auto detect it based on the ELF file.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: f2d70b47fcad31445f947f8817a0e146d80a046b.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Cadence GEM hardware allows incoming data to be 'screened' based on some
register values. Add support for these screens.

We also need to increase the max regs to avoid compilation failures. These new
registers are implemented in the next patch.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 73e69a8ad9fa2763e9f68f71eaf2469dd5744fcc.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Cadence GEM hardware supports N number priority queues, this patch is a
step towards that by adding the property to set the queues. At the moment
behaviour doesn't change as we only use queue 0.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 6543ec0d0c4bfd2678d0ed683efb197e91b17733.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some of the timer devices may behave differently from what ptimer
provides. Introduce ptimer policy feature that allows ptimer users to
change default and wrong timer behaviour, for example to continuously
trigger periodic timer when load value is equal to "0".
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Configure the size of the RAM of the SOC using a property to propagate
the value down to the memory controller from the board level.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-14-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

There is no need to do this at each reset as the RAM size will not
change.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-12-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Based on previous work done by Andrew Jeffery <andrew@aj.id.au>.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-9-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This gives some explanation behind the magic number 0x120CE416.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-8-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Let's define an object class for each Aspeed SoC we support. A
AspeedSoCInfo struct gathers the SoC specifications which can later be
used by an instance of the class or by a board using the SoC.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is a name replacement to prepare ground for other SoCs.

Let's also remove the AST2400_SMC_BASE definition from the address
space mappings, as it is not used. This controller was removed from
the Aspeed SoC AST2500, so this provides us a better common base for
the address space mapping on both SoCs.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Let's prepare for new Aspeed SoCs and rename the ast2400 file to a
more generic one. There are no changes in the code apart from the
header file include.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-2-git-send-email-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Extend the current module interface to allow for block drivers to be
loaded dynamically on request. The only block drivers that can be
converted into modules are the drivers that don't perform any init
operation except for registering themselves.

In addition, only the protocol drivers are being modularized, as they
are the only ones which see significant performance benefits. The format
drivers do not generally link to external libraries, so modularizing
them is of no benefit from a performance perspective.

All the necessary module information is located in a new structure found
in module_block.h

This spoils the purpose of 5505e8b7 (block/dmg: make it modular).

Before this patch, if module build is enabled, block-dmg.so is linked to
libbz2, whereas the main binary is not. In downstream, theoretically, it
means only the qemu-block-extra package depends on libbz2, while the
main QEMU package needn't to. With this patch, we (temporarily) change
the case so that the main QEMU depends on libbz2 again.
Signed-off-by: NMarc Marí <markmb@redhat.com>
Signed-off-by: NColin Lord <clord@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-4-git-send-email-clord@redhat.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
[mreitz: Do a signed comparison against the length of
 block_driver_modules[], so it will not cause a compile error when
 empty]
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-7-marcandre.lureau@redhat.com>

Currently when timing the pbkdf algorithm a fixed key
size of 32 bytes is used. This results in inaccurate
timings for certain hashes depending on their digest
size. For example when using sha1 with aes-256, this
causes us to measure time for the master key digest
doing 2 sha1 operations per iteration, instead of 1.

Instead we should pass in the desired key size to the
timing routine that matches the key size that will be
used for real later.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qcrypto_pbkdf_count_iters method uses a 64 bit int
but then checks its value against INT32_MAX before
returning it. This bounds check is premature, because
the calling code may well scale the iteration count
by some value. It is thus better to return a 64-bit
integer and let the caller do range checking.

For consistency the qcrypto_pbkdf method is also changed
to accept a 64bit int, though this is somewhat academic
since nettle is limited to taking an 'int' while gcrypt
is limited to taking a 'long int'.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

cpu model was merged with 2.8, it is wrong to abuse ri_allowed which
was enabled with 2.7.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The return address argument to the softmmu template helpers was
confused.  In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL.  However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.

Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.

This makes GETPC and GETRA identical.  Remove GETRA as the lesser
used macro, replacing all uses with GETPC.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.

This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.

Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.

This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NMaxime Coquelin <maxime.coquelin@redhat.com>

Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

All operations that take a floatx80 as an operand need to have their
inputs checked for malformed encodings. In all of these cases, use the
function floatx80_invalid_encoding to perform the check. If an invalid
operand is found, raise an invalid operation exception, and then return
either NaN (for fp-typed results) or the integer indefinite value (the
minimum representable signed integer value, for int-typed results).

For the non-quiet comparison operations, this touches adjacent code in
order to pass style checks.
Signed-off-by: NAndrew Dutcher <andrew@andrewdutcher.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1471392895-17324-1-git-send-email-andrew@andrewdutcher.com
[PMM: changed "1 << 63" to "1ULL << 63" to fix compile errors]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-6-git-send-email-rth@twiddle.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-4-git-send-email-rth@twiddle.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Just include the file that is supposed to bring it in.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Load the LAPIC state during post_load (rather than when the CPU
starts).

This allows an interrupt to be delivered from the ioapic to
the lapic prior to cpu loading, in particular the RTC that starts
ticking as soon as we load it's state.

Fixes a case where Windows hangs after migration due to RTC interrupts
disappearing.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use the __atomic_*_n() primitives which take the value as argument. It
is not necessary to store the value locally before calling the
primitive, hence saving us a stack store and load.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160829171701.14025-1-bobby.prani@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove the redundant barrier() after the fence as agreed in previous
discussion here:
https://lists.gnu.org/archive/html/qemu-devel/2016-04/msg00489.htmlSigned-off-by: NPranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160824204424.14041-3-bobby.prani@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_setup_guest_memory only does "madvise to QEMU_MADV_DONTFORK" and
is only called by ram_block_add, which actually is duplicate code.
Bonus: add simple comment for kvm_has_sync_mmu to make life easier.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1473662096-32598-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The comments is outdated. The patch has following changes:
1. tense correction.
2. all clock time value is returned in nanoseconds, so, they are same in
precision.
3. virtual clock doesn't use cpu cycles.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469790338-28990-2-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When invalidating a translation block, set an invalid flag into the
TranslationBlock structure first.  It is also necessary to check whether
the target TB is still valid after acquiring 'tb_lock' but before calling
tb_add_jump() since TB lookup is to be performed out of 'tb_lock' in
future. Note that we don't have to check 'last_tb'; an already invalidated
TB will not be executed anyway and it is thus safe to patch it.
Suggested-by: NSergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Right after main_loop ends, we release various things but keep iothread
alive. The latter is not prepared to the sudden change of resources.

Specifically, after bdrv_close_all(), virtio-scsi dataplane get a
surprise at the empty BlockBackend:

(gdb) bt
    at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:543
    at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:577

It is because the d->conf.blk->root is set to NULL, then
blk_get_aio_context() returns qemu_aio_context, whereas s->ctx is still
pointing to the iothread:

    hw/scsi/virtio-scsi.c:543:

    if (s->dataplane_started) {
        assert(blk_get_aio_context(d->conf.blk) == s->ctx);
    }

To fix this, let's stop iothreads before doing bdrv_close_all().

Cc: qemu-stable@nongnu.org
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1473326931-9699-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Auto complete mirror job in background to prevent from
blocking synchronously
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NChanglong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: NWang WeiWei <wangww.fnst@cn.fujitsu.com>
Message-id: 1469602913-20979-7-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>