- 23 2月, 2013 6 次提交
-
-
由 Stefan Hajnoczi 提交于
Show how many clusters are compressed. This can be used to monitor how many compressed clusters remain and whether to recompress the image. Suggested-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
The qemu-img check fragmentation printf() is missing a space before the '=' sign. The human output is not guaranteed to be stable and we are not aware of screen scrapers, so add the missing space. Also fix the missing indentation of the printf() arguments. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
The qemu-img check command can display fragmentation statistics: * Total number of clusters in virtual disk * Number of allocated clusters * Number of fragmented clusters This patch adds fragmentation statistics support to qcow2. Compressed and normal clusters count as allocated. Zero clusters are not counted as allocated unless their L2 entry has a non-zero offset (e.g. preallocation). Only the current L1 table counts towards the statistics - snapshots are ignored. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
The check_refcounts_l1/l2() functions have a check_copied argument to check that the QCOW_O_COPIED flag is consistent with refcount == 1. This should be a bool, not an int. However, the next patch introduces qcow2 fragmentation statistics and also needs to pass an option to check_refcounts_l1/l2(). This is a good opportunity to use an int flags field. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Federico Simoncelli 提交于
This option --output=[human|json] makes qemu-img check output a human or JSON representation at the choice of the user. Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Federico Simoncelli 提交于
This patch adds the support for reporting the image end offset (in bytes). This is particularly useful after a conversion (or a rebase) where the destination is a block device in order to find the first unused byte at the end of the image. Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 2月, 2013 27 次提交
-
-
由 Anthony Liguori 提交于
This gives us the bare amount of features we need. We can add work arounds for older versions and lower the requirement but this should be a good starting point. Suggested-by: NDaniel Berrange <berrange@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - tremendous simplification suggested by danpb
-
由 Gerd Hoffmann 提交于
Commit 8550a02d added a streams parameter to usb_wakeup and didn't update redirect.c. Fix it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
At least for Ubuntu Linux locale.h is needed. Signed-off-by: NStefan Weil <sw@weilnetz.de> Message-id: 1361514481-26164-1-git-send-email-sw@weilnetz.de Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
If you're full screen, you probably expect Ctrl-Q to go to the guest, not the host. I think restricting certain menus is the right way to handle this generally speaking. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-10-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
A user can still enable SDL with '-sdl' or '-display sdl' but start making the default display GTK by default. I'd also like to deprecate the SDL display and remove it in a few releases. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-9-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
This includes a de_DE translation from Kevin Wolf and an it translation from Paolo Bonzini. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-8-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
Basic menu items to enter full screen mode and zoom in/out. Unlike SDL, we don't allow arbitrary scaling based on window resizing. The current behavior with SDL causes a lot of problems for me. Sometimes I accidentally resize the window a tiny bit while trying to move it (Ubuntu's 1-pixel window decorations don't help here). After that, scaling is now active and if the screen changes size again, badness ensues since the aspect ratio is skewed. Allowing zooming by 25% in and out should cover most use cases. We can add a more flexible scaling later but for now, I think this is a more friendly behavior. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-7-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
There is a small deviation from SDL's behavior here. Instead of Ctrl+Alt triggering grab, we now use Ctrl-Alt-g to trigger grab. GTK will not accept Ctrl+Alt as an accelerator since it just consists of modifiers. Having grab as a proper accelerator is important as it allows a user to override the accelerator for accessibility purposes. We also are not automatically grabbing on left-click. Besides the inability to tie mouse clicks to an accelerator, I think this behavior is hard to discover and since it only happens depending on the guest state, it can lead to confusing behavior. This can be changed in the future if there's a strong resistence to dropping left-click-to-grab, but I think we're better off dropping it. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-6-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
This enables VteTerminal to be used to render the text consoles. VteTerminal is the same widget used by gnome-terminal which means it's VT100 emulation is as good as they come. It's also screen reader accessible, supports copy/paste, proper scrolling and most of the other features you would expect from a terminal widget. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-5-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
This is minimalistic and just contains the basic widget infrastructure. The GUI consists of a menu and a GtkNotebook. To start with, the notebook has its tabs hidden which provides a UI that looks very similar to SDL with the exception of the menu bar. The menu bar allows a user to toggle the visibility of the tabs. Cairo is used for rendering. I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU since it was originally written as a remote display for QEMU. So for the most part, the approach to rendering and keyboard handling should be pretty solid for GTK. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
We want to expose VCs using a VteTerminal widget. We need access to provide our own CharDriverState in order to do this. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-3-git-send-email-aliguori@us.ibm.com
-
由 Anthony Liguori 提交于
GTK won't build with strict-prototypes due to gtkitemfactory.h: /* We use () here to mean unspecified arguments. This is deprecated * as of C99, but we can't change it without breaking compatibility. * (Note that if we are included from a C++ program () will mean * (void) so an explicit cast will be needed.) */ typedef void (*GtkItemFactoryCallback) (); Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-id: 1361367806-4599-2-git-send-email-aliguori@us.ibm.com
-
由 Peter Crosthwaite 提交于
num_interfaces only tells you how many interfaces the concrete child class has (as defined in the TypeInfo). This means if you have a child class which defines no interfaces of its own, but its parent has interfaces you cannot cast to those parent interfaces. Fixed changing the guard to check the class->interfaces list instead (which is a complete flattened list of implemented interfaces). Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: a8c2db3b9b1f3c4bb81aca352b69e33260f36545.1361246206.git.peter.crosthwaite@xilinx.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Peter Crosthwaite 提交于
The QOM framework will attempt the recreate a classes interface list from scratch for each class. This means that a child class should zero out the list of interfaces when cloned from the parent class. Currently the list is memcpy()d from the parent to the child. As the interface list is just a pointer to a list, this means the parent and child will share the same list of interfaces. When the child inits, it will append its own interfaces to the parents list. This is incorrect as the parent should not pick up its childs interfaces. This actually causes an infinite loop at class init time, as the child will iterate through the parent interface list adding each itf to its own list(in type_initialize()). As the list is (erroneously) shared, the new interface instances for the child are appended to the parent, and the iterator never hits the tail and loops forever. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1f58d2b629d82865dbb2fd5ba8445854049c4382.1361246206.git.peter.crosthwaite@xilinx.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
In case host and guest endianness differ the vga code first creates a shared surface (using qemu_create_displaysurface_from), then goes patch the surface format to indicate that the bytes must be swapped. The switch to pixman broke that hack as the format patching isn't propagated into the pixman image, so ui code using the pixman image directly (such as vnc) uses the wrong format. Fix that by adding a byteswap parameter to qemu_create_displaysurface_from, so we'll use the correct format when creating the surface (and the pixman image) and don't have to patch the format afterwards. [ v2: unbreak xen build ] Cc: qemu-stable@nongnu.org Cc: mark.cave-ayland@ilande.co.uk Cc: agraf@suse.de Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Peter Maydell 提交于
The top level TODO file hasn't been touched since 2008, so it's now an unhelpful and out of date mix of things that have already been done, things that don't make sense any more and things which could in theory be done but are not in practice important enough (or we'd have done them some time in the last five years). Remove it. The bug tracking system is probably a better place to track TODO items if we want to do so. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1361377462-19816-1-git-send-email-peter.maydell@linaro.org Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jason Wang 提交于
Cc: Markus Armbruster <armbru@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Message-id: 1361354641-51969-1-git-send-email-jasowang@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
aio-posix.c could not take advantage of G_IO_HUP and G_IO_ERR because select(2) does not have equivalent events. Now that g_poll(3) is used we can support G_IO_HUP and G_IO_ERR. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-11-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
AioHandler already has a GPollFD so we can directly use its events/revents. Add the int pollfds_idx field to AioContext so we can map g_poll(3) results back to AioHandlers. Reuse aio_dispatch() to invoke handlers after g_poll(3). Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-10-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
We will need to loop over AioHandlers calling ->io_read()/->io_write() when aio_poll() is converted from select(2) to g_poll(2). Luckily the code for this already exists, extract it into the new aio_dispatch() function. Two small changes: * aio_poll() checks !node->deleted to avoid calling handlers that have been deleted. * Fix typo 'then' -> 'them' in aio_poll() comment. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-9-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
Now that all *_fill() and *_poll() functions use GPollFD we no longer need rfds/wfds/xfds or pollfds_from_select()/pollfds_to_select(). >From now on everything uses GPollFD. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-8-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
Convert iohandler_select_fill() and iohandler_select_poll() to use GPollFD instead of rfds/wfds/xfds. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-7-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
The slirp glue code uses tabs in some places. Since the next patch will modify the file, convert tabs to spaces and fix checkpatch.pl issues. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-5-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
Convert glib file descriptor polling from rfds/wfds/xfds to GPollFD. The Windows code still needs poll_fds[] and n_poll_fds but they can now become local variables. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-4-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
Use g_poll(3) instead of select(2). Well, this is kind of a cheat. It's true that we're now using g_poll(3) on POSIX hosts but the *_fill() and *_poll() functions are still using rfds/wfds/xfds. We've set the scene to start converting *_fill() and *_poll() functions step-by-step until no more rfds/wfds/xfds users remain. Then we'll drop the temporary gpollfds_from_select() and gpollfds_to_select() functions and be left with native g_poll(2). On Windows things are a little crazy: convert from rfds/wfds/xfds to GPollFDs, back to rfds/wfds/xfds, call select(2), rfds/wfds/xfds back to GPollFDs, and finally back to rfds/wfds/xfds again. This is only temporary and keeps the Windows build working through the following patches. We'll drop this excessive conversion later and be left with a single GPollFDs -> select(2) -> GPollFDs sequence that allows Windows to use select(2) while the rest of QEMU only knows about GPollFD. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-3-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Hajnoczi 提交于
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-2-git-send-email-stefanha@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 2月, 2013 7 次提交
-
-
由 Anthony Liguori 提交于
# By Gerd Hoffmann # Via Gerd Hoffmann * kraxel/usb.78: uas-uas: usb3 streams usb-xhci: usb3 streams usb-core: usb3 streams usb: fix endpoint descriptor ordering usb-redir: simplify packet copy usb: make usb_packet_copy operate on combined packets usb: add usb_ep_set_halted usb-host: remove usb_host_device_close usb-host: move legacy cmd line bits usb-storage: use scsi_req_enqueue return value allow disabling usb smartcard support make usb devices configurable fix scripts/make_device_config.sh usb: Makefile cleanup
-
由 Anthony Liguori 提交于
# By Alin Tomescu (1) and others # Via Stefan Hajnoczi * stefanha/trivial-patches: .gitignore: Ignore optionrom/*.asm ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.c Add some missing qtest binaries to .gitignore xilinx_axienet.c: Assert no error when making link Remove forward declaration of non-existant variable
-
由 Cole Robinson 提交于
Signed-off-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Alin Tomescu 提交于
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU would just hang. However, when I used -m 256, the machine would boot. I looked through the code in hw/ and it seems there is an error when the RAM memory is setup (if my understanding is correct). After patching it, the machine launched and booted successfully with 512MB of RAM. Signed-off-by: NAlin Tomescu <tomescu.alin@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 David Gibson 提交于
These binaries are generated during make check on at least some configurations, so att them to .gitignore. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Crosthwaite 提交于
This gives an awful silent failure when it doesn't work. Assert against link creation failure. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Hervé Poussineau 提交于
This variable has been removed 5 years ago in 970ac5a3. Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-