Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

For updating the cache sizes, disabling lazy refcounts and updating the
clean_cache_timer there is a bit more to do than just changing the
variables, but otherwise we're all set for changing options during
bdrv_reopen().

Just implement the missing pieces and hook the functions up in
bdrv_reopen().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Before we can allow updating options at runtime with bdrv_reopen(), we
need to split the function into prepare/commit/abort parts.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

On return, either all new options should be applied to BDRVQcowState (on
success), or all of the old settings should be preserved (on failure).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

With this commit, the handling of driver-specific options in
qcow2_open() is completely separated out into qcow2_update_options().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

qcow2_update_options() only updates some variables in BDRVQcowState and
doesn't really depend on other parts of it being initialised yet, so it
can be moved so that it immediately follows the other half of option
handling code in qcow2_open().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Eventually we want to be able to change options at runtime. As a first
step towards that goal, separate some option handling code from the
general initialisation code in qcow2_open().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Eric says that "any" sounds better than "either", and my non-native
feeling says the same, so let's change it.
Suggested-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

qemu_opts_parse_noisily() already prints an error message with the exact
reason why the parsing failed. No need to add another less specific one.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

BDRVQcowState is already used by qcow1, and gdb is always confused which
one to use. Rename the qcow2 one so they can be distinguished.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>

It is unused by now, so we can drop it.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that this parameter is effectively unused, we can drop it and change
the function accordingly.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that this parameter is effectively unused, we can drop it and just
pass NULL to bdrv_fill_options().
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

sh4-next:

- TCG optimizations
- fix initramfs endianness issue

# gpg: Signature made Sun 13 Sep 2015 22:16:12 BST using RSA key ID 1DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-sh4-next-20150913:
  sh4: Fix initramfs initialization for endiannes-mismatched targets
  target-sh4: improve shad instruction
  target-sh4: improve shld instruction
  target-sh4: improve cmp/str instruction
  target-sh4: use deposit in swap.b instruction
  target-sh4: add flags markups for FP helpers
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If host and target endianness does not match, loding an initramfs does not work.
Fix by writing boot parameters with appropriate endianness conversion.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The SH4 shad instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.

Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The SH4 shld instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.

Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Instead of testing bytes one by one, we can use the following trick
from https://graphics.stanford.edu/~seander/bithacks.html:

  haszero(v) = (v - 0x01010101) & ~v & 0x80808080

The subexpression v - 0x01010101, evaluates to a high bit set in any
byte whenever the corresponding byte in v is zero or greater than 0x80.
The sub-expression ~v & 0x80808080 evaluates to high bits set in bytes
where the byte of v doesn't have its high bit set (so the byte was less
than 0x80). Finally, by ANDing these two sub-expressions the result is
the high bits set where the bytes in v were zero, since the high bits
set due to a value greater than 0x80 in the first sub-expression are
masked off by the second.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Most floating point helpers can trigger an exception, but don't change
the globals. Mark these helpers as TCG_CALL_NO_WG.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

queued tcg related patches

# gpg: Signature made Fri 11 Sep 2015 16:17:00 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20150911:
  cpu-exec: introduce loop exit with restore function
  softmmu: remove now unused functions
  softmmu: add helper function to pass through retaddr
  tlb: Add "ifetch" argument to cpu_mmu_index()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a brief comment describing how to use the debug support
from GDB.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-5-git-send-email-peter.maydell@linaro.org

SIGUSR1 is QEMU's IPI signal, and it gets sent a lot, so is
best silently passed through to the guest without stopping.
Make qemu-gdb.py do this bit of configuration for the user.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-4-git-send-email-peter.maydell@linaro.org

Split the implementation of CoroutineCommand into its own file.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-3-git-send-email-peter.maydell@linaro.org

As we add more commands to our Python gdb debugging support, it's
going to get unwieldy to have everything in a single file. Split
the implementation of the 'mtree' command from qemu-gdb.py into
its own module.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-2-git-send-email-peter.maydell@linaro.org

This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This is set to true when the index is for an instruction fetch
translation.

The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.

All targets ignore it for now, and all other callers pass "false".

This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

trivial patches for 2015-09-11

# gpg: Signature made Fri 11 Sep 2015 12:02:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-09-11: (26 commits)
  virtio-vga: enable for i386
  hw/arm/spitz: Remove meaningless blank Property
  hw/gpio/zaurus: Remove meaningless blank Property
  hw/virtio/virtio-pci: Remove meaningless blank Property
  hw/s390x/s390-virtio-bus: Remove meaningless blank Property
  typofixes - v4
  qapi-schema: remove legacy<> from doc
  disas/microblaze: Remove unused code
  help: dd missing newline
  Target-ppc: Remove unnecessary variable
  baum: Fix build with debugging enabled
  linux-user: Fix warnings caused by missing 'static' attribute
  opts: produce valid command line in qemu_opts_print
  docs: fix a qga/qapi-schema.json comment
  trivial: remove trailing newline from error_report
  maint: avoid useless "if (foo) free(foo)" pattern
  maint: avoid useless "if (foo) free(foo)" pattern
  maint: remove unused include for strings.h
  maint: remove unused include for signal.h
  maint: remove unused include for dirent.h
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This one just syncs x86_64 and i386.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>