- 20 3月, 2018 5 次提交
-
-
由 Max Reitz 提交于
Instead of converting all "backing": null instances into "backing": "", handle a null value directly in bdrv_open_inherit(). This enables explicitly null backing links for json:{} filenames. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-7-mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> [eblake: rebase to qobject_to() parameter order and qapi headers split] Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Max Reitz 提交于
This patch reworks some places which use either qobject_type() checks plus qobject_to(), where the latter alone is sufficient, or NULL checks plus qobject_type() checks where we can simply do a qobject_to() != NULL check. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-6-mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> [eblake: rebase to qobject_to() parameter ordering] Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Max Reitz 提交于
They are no longer needed now. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-5-mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Max Reitz 提交于
This patch was generated using the following Coccinelle script: @@ expression Obj; @@ ( - qobject_to_qnum(Obj) + qobject_to(QNum, Obj) | - qobject_to_qstring(Obj) + qobject_to(QString, Obj) | - qobject_to_qdict(Obj) + qobject_to(QDict, Obj) | - qobject_to_qlist(Obj) + qobject_to(QList, Obj) | - qobject_to_qbool(Obj) + qobject_to(QBool, Obj) ) and a bit of manual fix-up for overly long lines and three places in tests/check-qjson.c that Coccinelle did not find. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Message-Id: <20180224154033.29559-4-mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> [eblake: swap order from qobject_to(o, X), rebase to master, also a fix to latent false-positive compiler complaint about hw/i386/acpi-build.c] Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Max Reitz 提交于
This is a dynamic casting macro that, given a QObject type, returns an object as that type or NULL if the object is of a different type (or NULL itself). The macro uses lower-case letters because: 1. There does not seem to be a hard rule on whether qemu macros have to be upper-cased, 2. The current situation in qapi/qmp is inconsistent (compare e.g. QINCREF() vs. qdict_put()), 3. qobject_to() will evaluate its @obj parameter only once, thus it is generally not important to the caller whether it is a macro or not, 4. I prefer it aesthetically. The macro parameter order is chosen with typename first for consistency with other QAPI macros like QAPI_CLONE(), as well as for legibility (read it as "qobject to" type "applied to" obj). Signed-off-by: NMax Reitz <mreitz@redhat.com> Message-Id: <20180224154033.29559-3-mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> [eblake: swap parameter order to list type first, avoid clang ubsan warning on QOBJECT(NULL) and container_of(NULL,type,base)] Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 19 3月, 2018 35 次提交
-
-
由 Max Reitz 提交于
_Static_assert() allows us to specify messages, and that may come in handy. Even without _Static_assert(), encouraging developers to put a helpful message next to the QEMU_BUILD_BUG_* may make debugging easier whenever it breaks. Signed-off-by: NMax Reitz <mreitz@redhat.com> Message-Id: <20180224154033.29559-2-mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Marc-André Lureau 提交于
Replace the generated json string with a literal qobject. The later is easier to deal with, at run time as well as compile time: adding #if conditionals will be easier than in a json string. The output of query-qmp-schema is not changed. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20180305172951.2150-5-marcandre.lureau@redhat.com> [eblake: fix python 3 failure] Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Marc-André Lureau 提交于
Instantiate a QObject* from a literal QLitObject. LitObject only supports int64_t for now. uint64_t and double aren't implemented. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20180305172951.2150-4-marcandre.lureau@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Marc-André Lureau 提交于
Suggested-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20180305172951.2150-3-marcandre.lureau@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Marc-André Lureau 提交于
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20180305172951.2150-2-marcandre.lureau@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Peter Maydell 提交于
Block layer patches # gpg: Signature made Mon 19 Mar 2018 11:01:45 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (46 commits) iotests: Avoid realpath, for CentOS 6 block: fix iotest 146 output expectations iscsi: fix iSER compilation block: Fix leak of ignore_children in error path vvfat: Fix inherit_options flags block/mirror: change the semantic of 'force' of block-job-cancel vpc: Require aligned size in .bdrv_co_create vpc: Support .bdrv_co_create vhdx: Support .bdrv_co_create vdi: Make comments consistent with other drivers qed: Support .bdrv_co_create qcow: Support .bdrv_co_create qemu-iotests: Enable write tests for parallels parallels: Support .bdrv_co_create iotests: Add regression test for commit base locking block: Fix flags in reopen queue vdi: Implement .bdrv_co_create vdi: Move file creation to vdi_co_create_opts vdi: Pull option parsing from vdi_co_create qemu-iotests: Test luks QMP image creation ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Eric Blake 提交于
CentOS 6 lacks a realpath binary on the base install, which makes all iotests runs fail since the 2.11 release: 001 - output mismatch (see 001.out.bad) ./check: line 815: realpath: command not found diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out' diff: Try `diff --help' for more information. Many of the uses of 'realpath' in the check script were being used on the output of 'type -p' - but that is already an absolute file name. While a canonical name can often be shorter (realpath gets rid of /../), it can also be longer (due to symlink expansion); and we really don't care if the name is canonical, merely that it was an executable file with an absolute path. These were broken in commit cceaf1db. The remaining use of realpath was to convert a possibly relative filename into an absolute one before calling diff to make it easier to copy-and-paste the filename for moving the .bad file into place as the new reference file even when running iotests out-of-tree (see commit 93e53fb6), but $PWD can achieve the same purpose. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
Commit bff55548 added "force_size" into the common.filter for _filter_img_create(), but test 146 still expects it in the output. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Paolo Bonzini 提交于
This fails in Fedora 28. Reported-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Reported-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Overriding flags violates the precedence rules of bdrv_reopen_queue_child. Just like the read-only option, no-flush should be put into the options. The same is done in bdrv_temp_snapshot_options. Reported-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Liang Li 提交于
When doing drive mirror to a low speed shared storage, if there was heavy BLK IO write workload in VM after the 'ready' event, drive mirror block job can't be canceled immediately, it would keep running until the heavy BLK IO workload stopped in the VM. Libvirt depends on the current block-job-cancel semantics, which is that when used without a flag after the 'ready' event, the command blocks until data is in sync. However, these semantics are awkward in other situations, for example, people may use drive mirror for realtime backups while still wanting to use block live migration. Libvirt cannot start a block live migration while another drive mirror is in progress, but the user would rather abandon the backup attempt as broken and proceed with the live migration than be stuck waiting for the current drive mirror backup to finish. The drive-mirror command already includes a 'force' flag, which libvirt does not use, although it documented the flag as only being useful to quit a job which is paused. However, since quitting a paused job has the same effect as abandoning a backup in a non-paused job (namely, the destination file is not in sync, and the command completes immediately), we can just improve the documentation to make the force flag obviously useful. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: John Snow <jsnow@redhat.com> Reported-by: NHuaitong Han <huanhuaitong@didichuxing.com> Signed-off-by: NHuaitong Han <huanhuaitong@didichuxing.com> Signed-off-by: NLiang Li <liliangleo@didichuxing.com> Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Perform the rounding to match a CHS geometry only in the legacy code path in .bdrv_co_create_opts. QMP now requires that the user already passes a CHS aligned image size, unless force-size=true is given. CHS alignment is required to make the image compatible with Virtual PC, but not for use with newer Microsoft hypervisors. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This adds the .bdrv_co_create driver callback to vpc, which enables image creation over QMP. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This adds the .bdrv_co_create driver callback to vhdx, which enables image creation over QMP. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This makes the .bdrv_co_create(_opts) implementation of vdi look more like the other recently converted block drivers. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This adds the .bdrv_co_create driver callback to qed, which enables image creation over QMP. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
由 Kevin Wolf 提交于
This adds the .bdrv_co_create driver callback to qcow, which enables image creation over QMP. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com>
-
由 Kevin Wolf 提交于
Originally we added parallels as a read-only format to qemu-iotests where we did just some tests with a binary image. Since then, write and image creation support has been added to the driver, so we can now enable it in _supported_fmt generic. The driver doesn't support migration yet, though, so we need to add it to the list of exceptions in 181. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com>
-
由 Kevin Wolf 提交于
This adds the .bdrv_co_create driver callback to parallels, which enables image creation over QMP. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com>
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Reopen flags are not synchronized according to the bdrv_reopen_queue_child precedence until bdrv_reopen_prepare. It is a bit too late: we already check the consistency in bdrv_check_perm before that. This fixes the bug that when bdrv_reopen a RO node as RW, the flags for backing child are wrong. Before, we could recurse with flags.rw=1; now, role->inherit_options + update_flags_from_options will make sure to clear the bit when necessary. Note that this will not clear an explicitly set bit, as in the case of parallel block jobs (e.g. test_stream_parallel in 030), because the explicit options include 'read-only=false' (for an intermediate node used by a different job). Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
In preparation of QAPI-fying VDI image creation, we have to create a BlockdevCreateOptionsVdi type which is received by a (future) vdi_co_create(). vdi_co_create_opts() now converts the QemuOpts object into such a BlockdevCreateOptionsVdi object. The protocol-layer file is still created in vdi_co_do_create() (and BlockdevCreateOptionsVdi.file is set to an empty string), but that will be addressed by a follow-up patch. Note that cluster-size is not part of the QAPI schema because it is not supported by default. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Kevin Wolf 提交于
When you request an image size close to UINT64_MAX, the addition of the crypto header may cause an integer overflow. Catch it instead of silently truncating the image size. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Kevin Wolf 提交于
The .bdrv_getlength implementation of the crypto block driver asserted that the payload offset isn't after EOF. This is an invalid assertion to make as the image file could be corrupted. Instead, check it and return -EIO if the file is too small for the payload offset. Zero length images are fine, so trigger -EIO only on offset > len, not on offset >= len as the assertion did before. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Kevin Wolf 提交于
This adds the .bdrv_co_create driver callback to luks, which enables image creation over QMP. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Kevin Wolf 提交于
Everything that refers to the protocol layer or QemuOpts is moved out of block_crypto_create_generic(), so that the remaining function is suitable to be called by a .bdrv_co_create implementation. LUKS is the only driver that actually implements the old interface, and we don't intend to use it in any new drivers, so put the moved out code directly into a LUKS function rather than creating a generic intermediate one. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
The crypto driver used to create the image file in a callback from the crypto subsystem. If we want to implement .bdrv_co_create, this needs to go away because that callback will get a reference to an already existing block node. Move the image file creation to block_crypto_create_generic(). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 John Snow 提交于
Whatever the state a blockjob is in, it should be able to be canceled by the block layer. Signed-off-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 John Snow 提交于
Signed-off-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 John Snow 提交于
Expose the "manual" property via QAPI for the backup-related jobs. As of this commit, this allows the management API to request the "concluded" and "dismiss" semantics for backup jobs. Signed-off-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 John Snow 提交于
Instead of automatically transitioning from PENDING to CONCLUDED, gate the .prepare() and .commit() phases behind an explicit acknowledgement provided by the QMP monitor if auto_finalize = false has been requested. This allows us to perform graph changes in prepare and/or commit so that graph changes do not occur autonomously without knowledge of the controlling management layer. Transactions that have reached the "PENDING" state together can all be moved to invoke their finalization methods by issuing block_job_finalize to any one job in the transaction. Jobs in a transaction with mixed job->auto_finalize settings will all remain stuck in the "PENDING" state, as if the entire transaction was specified with auto_finalize = false. Jobs that specified auto_finalize = true, however, will still not emit the PENDING event. Signed-off-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-