Indeed vhost doesn't need to ask for vring endian fixing if the device is
virtio 1.0, since it is already handled by the in-kernel vhost driver. This
patch simply consolidates the logic into the existing helper.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

If target is bi-endian (ppc64, arm), the virtio_legacy_is_cross_endian()
indeed returns the runtime state of the virtio device. However, it returns
false unconditionally in the general case. This sounds a bit strange
given the name of the function.

This helper is only useful for vhost actually, where indeed non bi-endian
targets don't have to deal with cross-endian issues.

This patch moves the helper to vhost.c and gives it a more appropriate name.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

Cross-endian is now handled by the core virtio-net code.

This patch reverts:

commit 5be7d9f1
	vhost-net: tell tap backend about the vnet endianness

and

commit cf0a628f6e81bfc9b7a944fa0b80c3594836df56
	net: set endianness on all backend devices
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

When running a fully emulated device in cross-endian conditions, including
a virtio 1.0 device offered to a big endian guest, we need to fix the vnet
headers. This is currently handled by the virtio_net_hdr_swap() function
in the core virtio-net code but it should actually be handled by the net
backend.

With this patch, virtio-net now tries to configure the backend to do the
endian fixing when the device starts (i.e. drivers sets the CONFIG_OK bit).
If the backend cannot support the requested endiannes, we have to fallback
onto virtio_net_hdr_swap(): this is recorded in the needs_vnet_hdr_swap flag,
to be used in the TX and RX paths.

Note that we reset the backend to the default behaviour (guest native
endianness) when the device stops (i.e. device status had CONFIG_OK bit and
driver unsets it). This is needed, with the linux tap backend at least,
otherwise the guest may lose network connectivity if rebooted into a
different endianness.

The current vhost-net code also tries to configure net backends. This will
be no more needed and will be reverted in a subsequent patch.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

Xen 2016-02-12

# gpg: Signature made Fri 12 Feb 2016 17:28:09 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"

* remotes/sstabellini/tags/xen-2016-02-12:
  xen: Drop __XEN_LATEST_INTERFACE_VERSION__ checks from prior to Xen 4.2
  xen: move xenforeignmemory compat layer into common place
  xen: drop XenXC and associated interface wrappers
  xen: drop xen_xc_hvm_inject_msi wrapper
  xen: drop support for Xen 4.1 and older.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

trivial patches for 2016-02-11

# gpg: Signature made Thu 11 Feb 2016 12:16:04 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2016-02-11:
  w32: include winsock2.h before windows.h
  Adds keycode 86 to the hid_usage_keys translation table.
  s390x: remove s390-zipl.rom
  Passthru CCID card: QOMify
  Emulated CCID card: QOMify
  ES1370: QOMify
  char: fix parameter name / type in BSD codepath
  qmp-spec: fix index in doc
  rdma: remove check on time_spent when calculating mbs
  qemu-sockets: simplify error handling
  cpu: cpu_save/cpu_load is no more
  qom: Correct object_property_get_int() description
  man: virtfs-proxy-helper: Rework awkward sentence
  remove libtool support
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Wed 10 Feb 2016 19:23:29 GMT using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  ahci: prohibit "restarting" the FIS or CLB engines
  ahci: explicitly reject bad engine states on post_load
  ahci: handle LIST_ON and FIS_ON in map helpers
  ahci: Do not unmap NULL addresses
  fdc: always compile-check debug prints
  ide: fix device_reset to not ignore pending AIO
  ide: Add silent DRQ cancellation
  ide: replace blk_drain_all by blk_drain
  ide: move buffered DMA cancel to core
  ide: code motion
  ide: Prohibit RESET on IDE drives
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Recent Fedora complains while compiling ui/sdl.c:

    /usr/x86_64-w64-mingw32/sys-root/mingw/include/winsock2.h:15:2: warning: #warning Please include winsock2.h before windows.h [-Wcpp]

And with this patch we dutifully obey.

Stefan Weil:

Without that patch, windows.h will include winsock.h
(which conflicts with winsock2.h) when compiling sdl.c.

Normally we define WIN32_LEAN_AND_MEAN, and
windows.h won't include winsock.h.

include/ui/sdl2.h and ui/sdl.c undefine that macro,
so the order of the include files is important.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This key is present in international keyboards, between left shift and
the 'Z' key, ant is described in the HID usage tables as "Keyboard
Non-US \ and |": http://www.usb.org/developers/hidpage/Hut1_12v2.pdf

This patch fixes the usb-kbd devices.
Signed-off-by: NDaniel Serpell <daniel.serpell@gmail.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This is an s390 boot rom which was used in s390-virtio machine.
but since commit 3538fb6f
"s390x: remove s390-virtio machine", this file isn't used.
The only place it is referenced in the code is an unused
define ZIPL_FILENAME.  There's also comment in hw/s390/ipl.c
which I'm modifying too, to refer to s390-ccw.img instead.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The BSD impl of qemu_chr_open_pp_fd had mis-declared
its parameter type as ChardevBackend instead of
ChardevCommon. It had also mistakenly used the variable
name 'common' instead of 'backend'.
Tested-by: NSean Bruno <sbruno@freebsd.org>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The index is duplicated. Just change it.
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Within the if statement, time_spent is assured to be non-zero.

This patch just removes the check on time_spent when calculating mbs.
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Just go always through the err label.  (Noticed because Coverity
complains that peer is always non-NULL in the error cleanup code,
but removing the "if" is arguably more prone to introducing the
opposite bug in the future).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Everything has been converted to vmstate.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The description of object_property_get_int() stated that on an error
it returns NULL. This is not the case and the function will return -1
if an error occurs. Update the commented documentation accordingly.
Reported-By: NChristian Liebhardt <christian.liebhardt@keysight.com>
Signed-off-by: NChristian Liebhardt <christian.liebhardt@keysight.com>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

There was a 'capbilities' typo in this man page. This commit
reformulates the sentence the typo was in to make it easier to grasp.
This is based on a suggestion from Eric Blake.
Signed-off-by: NChristophe Fergeau <cfergeau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Libtool support was needed to build shared library for libcacard.
Now there's no need to use libtool, and since the build system is
already complicated enough, we have a way to slightly de-complicate
it.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>

target-arm queue:
 * fix some missing traps for EL3 support
 * enable EL3 on Cortex-A53 and Cortex-A57
 * fix syndrome IL bit for Thumb coprocessor, VFP and Neon traps
 * fix mishandling of architectural watchpoints
 * avoid buffer overflow in sd.c
 * fix max-cpus check in virt board
 * implement 'get board revision' query for BCM2835

# gpg: Signature made Thu 11 Feb 2016 11:23:47 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160211:
  bcm2835_property: implement "get board revision" query
  hw/arm/virt: fix max-cpus check
  sd: limit 'req.cmd' while using as an array index
  target-arm: Implement checking of fired watchpoint
  cpu: Add callback to check architectural watchpoint match
  target-arm: Fix IL bit reported for Thumb VFP and Neon traps
  target-arm: Fix IL bit reported for Thumb coprocessor traps
  target-arm: Correct misleading 'is_thumb' syn_* parameter names
  target-arm: Enable EL3 for Cortex-A53 and Cortex-A57
  target-arm: Implement NSACR trapping behaviour
  target-arm: Add isread parameter to CPAccessFns
  target-arm: Update arm_generate_debug_exceptions() to handle EL2/EL3
  target-arm: Use access_trap_aa32s_el1() for SCR and MVBAR
  target-arm: Implement MDCR_EL3 and SDCR
  target-arm: Fix typo in comment in arm_is_secure_below_el3()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Return a valid value from the BCM2835 property mailbox query "get board
revision". This query is used by U-Boot. Implementing it fixes the first
obvious difference between qemu and real HW.

The value returned is currently hard-coded to match the RPi2 I own. Other
values are legal, e.g. different board manufacturer field values are
likely to exist in the wild.

Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Reviewed-by: NAndrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454993910-24077-1-git-send-email-swarren@wwwdotorg.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

mach-virt doesn't yet support hotplug, but command lines specifying
-smp <num>,maxcpus=<bigger-num> don't fail. Of course specifying
bigger-num as something bigger than the machine supports, e.g. > 8
on a gicv2 machine, should fail though. This fix also makes mach-
virt's max-cpus check truly consistent with the one in vl.c:main,
as the one there was already correctly checking max-cpus instead
of smp-cpus.
Reported-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1454511578-24863-1-git-send-email-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

While processing standard SD commands, the 'req.cmd' value could
lead to OOB read when used as an index into 'sd_cmd_type' or
'sd_cmd_class' arrays. Limit 'req.cmd' value to avoid such an
access.
Reported-by: NQinghao Tang <luodalongde@gmail.com>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453315857-1352-1-git-send-email-ppandit@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ARM stops before access to a location covered by watchpoint. Also, QEMU
watchpoint fire is not necessarily an architectural watchpoint match.
Unfortunately, that is hardly possible to ignore a fired watchpoint in
debug exception handler. So move watchpoint check from debug exception
handler to the dedicated watchpoint checking callback.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1454256948-10485-3-git-send-email-serge.fdrv@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When QEMU watchpoint matches, that is not definitely an architectural
watchpoint match yet. If it is a stop-before-access watchpoint then that
is hardly possible to ignore it after throwing a TCG exception.

A special callback is introduced to check for architectural watchpoint
match before raising a TCG exception.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454256948-10485-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

All Thumb Neon and VFP instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-4-git-send-email-peter.maydell@linaro.org

All Thumb coprocessor instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-3-git-send-email-peter.maydell@linaro.org

In syndrome register values, the IL bit indicates the instruction
length, and is 1 for 4-byte instructions and 0 for 2-byte
instructions. All A64 and A32 instructions are 4-byte, but
Thumb instructions may be either 2 or 4 bytes long. Unfortunately
we named the parameter to the syn_* functions for constructing
syndromes "is_thumb", which falsely implies that it should be
set for all Thumb instructions, rather than only the 16-bit ones.
Fix the functions to name the parameter 'is_16bit' instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-2-git-send-email-peter.maydell@linaro.org

Enable EL3 support for our Cortex-A53 and Cortex-A57 CPU models.
We have enough implemented now to be able to run real world code
at least to some extent (I can boot ARM Trusted Firmware to the
point where it pulls in OP-TEE and then falls over because it
doesn't have a UEFI image it can chain to).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-8-git-send-email-peter.maydell@linaro.org

Implement some corner cases of the behaviour of the NSACR
register on ARMv8:
 * if EL3 is AArch64 then accessing the NSACR from Secure EL1
   with AArch32 should trap to EL3
 * if EL3 is not present or is AArch64 then reads from NS EL1 and
   NS EL2 return constant 0xc00

It would in theory be possible to implement all these with
a single reginfo definition, but for clarity we use three
separate definitions for the three cases and install the
right one based on the CPU feature flags.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-7-git-send-email-peter.maydell@linaro.org

System registers might have access requirements which need to
be described via a CPAccessFn and which differ for reads and
writes. For this to be possible we need to pass the access
function a parameter to tell it whether the access being checked
is a read or a write.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-6-git-send-email-peter.maydell@linaro.org

The arm_generate_debug_exceptions() function as originally implemented
assumes no EL2 or EL3. Since we now have much more of an implementation
of those now, fix this assumption.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-5-git-send-email-peter.maydell@linaro.org

The registers MVBAR and SCR should have the behaviour of trapping to
EL3 if accessed from Secure EL1, but we were incorrectly implementing
them to UNDEF (which would trap to EL1).  Fix this by using the new
access_trap_aa32s_el1() access function.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-4-git-send-email-peter.maydell@linaro.org

Implement the MDCR_EL3 register (which is SDCR for AArch32).
For the moment we implement it as reads-as-written.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-3-git-send-email-peter.maydell@linaro.org

Fix a typo where "EL2" was written but "EL3" intended.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-2-git-send-email-peter.maydell@linaro.org

The last two arguments to these functions are the last and first bit to
check relative to the base.  The code was using incorrectly the first
bit and the number of bits.  Fix this in cpu_physical_memory_get_dirty
and cpu_physical_memory_all_dirty.  This requires a few changes in the
iteration; change the code in cpu_physical_memory_set_dirty_range to
match.

Fixes: 5b82b703
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NLeon Alrae <leon.alrae@imgtec.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Message-id: 1455113505-11237-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If the FIS or DMA engines are already started, do not allow them to be
"restarted." As a side-effect of this change, the migration post-load
routine must be modified to cope. If the engines are listed as "on"
in the migrated registers, they must be cleared to allow the startup
routine to see the transition from "off" to "on".

As a second side-effect, the extra argument to ahci_cond_engine_start
is removed in favor of consistent behavior.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1454103689-13042-5-git-send-email-jsnow@redhat.com

Currently, we let ahci_cond_start_engines reject weird configurations
where either the DMA (CLB) or FIS engines are said to be started, but
their matching on/off control bit is toggled off.

There should be no way to achieve this, since any time you toggle the
control bit off, the status bit should always follow synchronously.

Preparing for a refactor in cond_start_engines, move the rejection logic
straight up into post_load.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1454103689-13042-4-git-send-email-jsnow@redhat.com