The specification for the virtio balloon device requres that the values
in the config space be encoded little-endian.  This differs from most
virtio things, where guest-native endian is the norm.

Currently, the qemu virtio-balloon code correctly makes the conversion
on get_config(), but doesn't on set_config for the 'actual' field.  The
kernel driver, on the other hand, correctly converts when setting the
actual field, but does not convert when reading the config space.  The
upshot is that virtio-balloon will only work correctly if both host and
guest are LE, making all the conversions nops.

This patch corrects the qemu side, correctly doing host-native <-> LE
conversions when accessing the config space.  This won't break any setups
that aren't already broken, and fixes the case of BE host, LE guest.
Fixing the BE guest case will require kernel fixes as well.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

The 9p code already contains an attempt at the necessary endian
conversions, but it's broken.

The code which does conversion from host to guest does it correctly
and this code was copied to the function which does guest to host
conversion.  However the copied code hasn't been correctly updated, so
it first endian converts some garbage on the stack and then overwrites
it with a field from incoming packet without conversion.

The patch fixes the mistakes.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Compiling with the DEBUG macro causes leaves hw/spapr_llan.c with an
unused variable, which is treated as an error in the qemu build.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

In previous life qdev_init_nofail() used to call hw_error() which
did register dump and other scary things.  Now it calls
error_report() and does a regular exit(1).  Fix the comment
to match reality.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

While looking at David Gibson's build-fix for hw/usb-ccid.c, I noticed a spello
in a comment on the following (unchanged) line.
Signed-off-by: NBrad Hards <bradh@frogmouth.net>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Standard autoconf scripts include a --version flag so people can easily
query things.  Add this to qemu's configure so it too can integrate with
build systems that have standard autotool helpers.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

CPU_QuadU isn't used on all targets, but there's no harm in defining the
typedef anyway. It only needs to be guarded by CONFIG_SOFTFLOAT, because
softfloat-native doesn't have a float128 type. This avoids the need for
every new target which uses CPU_QuadU to add itself to an #ifdef in
what ought to be target-agnostic code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make the Neon helper routines use the correct FP status from
the CPUEnv rather than using a dummy static one. This means
they will correctly handle denormals and NaNs and will set
FPSCR exception bits properly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use the global 'env' variable in the helper functions in iwmmxt_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use the global 'env' variable in the helper functions in neon_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Build all files matching *_helper.c with HELPER_CFLAGS, not just
op_helper.c. This allows you to put target helper functions which
use the global 'env' variable in multiple source files.

This only affects the ARM target as all the other targets currently only
have op_helper.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

At one point, usb-ccid.c attempts to use a %lX format specifier to print
a uint64_t, which is only correct on some host platforms.  This patch
corrects the statement to use the stdint specified PRIX64 constant instead.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).

Additional to running bare metal applications, booting a linux kernel with
initrd is supported.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds wrappers for easy creation of the qdev devices.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's simple UART.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch introduce a new config option CONFIG_OPENGL.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's System Controller core. The model
has the following features:
 - support for shutting down and restarting the board
 - provide two timers and GPIO
 - provide registers for system identification and reading the boards
   capabilities
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's memory card core.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This reverts commit 9bcfc7da.

S390x uses the QuadU type, so let's enable it.
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

S390x user emulation can do nptl. Reflect this in the configure script.
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch enables the instruction disassembler when using an
S390x target.
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit 6b331efb broke the s390 proxy version
of virtio-serial by only taking its PCI brother into account.

So let's adjust s390-virtio-serial the same way as its PCI counterpart, making
it compile and work again.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: Amit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

During Jan's rework of the generic KVM layer, he added some more error checks
and actually aborted if something went wrong. Unfortunately, one of the s390
internal error codes slipped through, aborting the VM without needing to.

This patch fixes booting of S390x virtual machines in KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We have two different virtio buses: pci and s390. The abstraction path
taken in qemu is to have generic aliases for each device type in the
architecture specific qdev devices.

So let's make use of these aliases whenever we can and define them
whenever we can.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The ivshmem depends on PCI and KVM, not only KVM. Reflect this
in the Makefile, so we don't get build errors on s390x.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: Cam Macdonell <cam@cs.ualberta.ca>
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

arpa/inet.h is not available for w32, so commit
edbb2136 breaks
w32 compilations.

This is fixed by using qemu_socket.h.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Reviewed-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

SDL library initialization mangles signal handlers, so QEMU should
register them after initializing SDL. This was the case before and code
even have a comment about that. Fix it to be so again.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Tidy up the message printed when qemu exits due to a signal, so that
it's clearer where the message is coming from and that it's not just
stray debug output.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The common checksum functions were moved to net/checksum.c in commit
7200ac3c but the original net-checksum.c
was never deleted from the source tree.  Remove it now since all users
of the checksum functions link against net/checksum.o and net-checksum.c
is not even compiled anymore.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rx and Tx descriptors are 16 byte aligned, so the lower bits are
ignored by real hardware. In fact, they always read back as zero on real
hardware, but probably nobody relies on that.
Signed-off-by: NKevin Wolf <mail@kevin-wolf.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>