- 20 10月, 2014 5 次提交
-
-
由 Markus Armbruster 提交于
Creating an anonymous BDS can't fail. Make that obvious. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Export names may be used with nbd+unix, too, fix nbd_refresh_filename() accordingly. Also, for nbd+tcp, the documented path schema is "nbd://host[:port]/export", so use it. Furthermore, as can be seen from that schema, the port is optional. That makes six single cases for how the filename can be formatted; it is not easy to generalize these cases without the resulting statement being completely unreadable, thus there is simply one snprintf() per case. Finally, taking the options from BDRVNBDState::socket_opts is wrong, because those will not contain the export name. Just use BlockDriverState::options instead. Reported-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Tony Breeds 提交于
try_fiemap() uses FIEMAP_FLAG_SYNC which has a significant performance impact. Prefer seek_hole() over fiemap() to avoid this impact where possible. seek_hole is more widely used and, arguably, has potential to be optimised in the kernel. Reported-By: NMichael Steffens <michael_steffens@posteo.de> Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Pádraig Brady <pbrady@redhat.com> Cc: Eric Blake <eblake@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Tony Breeds 提交于
Using fiemap without FIEMAP_FLAG_SYNC is a known corrupter. Add the FIEMAP_FLAG_SYNC flag to the FS_IOC_FIEMAP ioctl. This has the downside of significantly reducing performance. Reported-By: NMichael Steffens <michael_steffens@posteo.de> Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Pádraig Brady <pbrady@redhat.com> Cc: Eric Blake <eblake@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Zhang Haoyu 提交于
When the Qcow2DiscardRegion is adjacent to another one referenced by "d", free this Qcow2DiscardRegion metadata referenced by "p" after it was removed from s->discards queue. Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 17 10月, 2014 1 次提交
-
-
由 Gonglei 提交于
This patch fixes compilation errors when building against glib < 2.16.0 due to the missing g_strcmp0() function. Suggested-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NGonglei <arei.gonglei@huawei.com> Message-id: 1413457177-10132-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 16 10月, 2014 2 次提交
-
-
由 Peter Maydell 提交于
vga-pci: add qext region to mmio vga: Remove unused arrays dmask4 and dmask16 # gpg: Signature made Wed 15 Oct 2014 10:12:06 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20141015-1: hw/display/vga: Remove unused arrays dmask4 and dmask16 vga-pci: add qext region to mmio Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
allow changing bootorder via monitor at runtime, by making bootindex a writable qom property. * remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits) bootindex: change fprintf to error_report bootindex: delete bootindex when device is removed bootindex: move calling add_boot_device_patch to bootindex setter function ide: add calling add_boot_device_patch in bootindex setter function nvma: ide: add bootindex to qom property usb-storage: add bootindex to qom property virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390 block: remove bootindex property from qdev to qom virtio-blk: add bootindex to qom property ide: add bootindex to qom property scsi: add bootindex to qom property isa-fdc: remove bootindexA/B property from qdev to qom redirect: remove bootindex property from qdev to qom vfio: remove bootindex property from qdev to qom pci-assign: remove bootindex property from qdev to qom host-libusb: remove bootindex property from qdev to qom virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390 net: remove bootindex property from qdev to qom usb-net: add bootindex to qom property vmxnet3: add bootindex to qom property ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 15 10月, 2014 32 次提交
-
-
由 Stefan Hajnoczi 提交于
This patch fixes compilation errors when building against glib <2.28.0 due to the missing g_get_monotonic_time() function. The compilation error in tests/libqos/virtio.c was introduced in commit 70556264 ("libqos: use microseconds instead of iterations for virtio timeout"). Add a simple g_get_monotonic_time() implementation to glib-compat.h based on code from vhost-user-test.c. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> [Igor: add G_TIME_SPAN_SECOND, include glib-compat.h in libqtest.h] Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
migration/next for 20141015 # gpg: Signature made Wed 15 Oct 2014 09:21:54 BST using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20141015: migration: catch unknown flag combinations in ram_load qemu-file: Move stdio implementation to qemu-file-stdio.c qemu-file: Move unix and socket implementations to qemu-file-unix.c qemu-file: Use qemu_file_is_writable() on stdio_fclose() qemu-file: Make qemu_file_is_writable() non-static qemu-file: Add copyright header to qemu-file.c vmstate: Allow dynamic allocation for VBUFFER during migration block/migration: Disable cache invalidate for incoming migration Tests: QEMUSizedBuffer/QEMUBuffer QEMUSizedBuffer based QEMUFile Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Following cleanup of the vga device code in commit d2e043a8, the arrays dmask4 and dmask16 are now unused. gcc doesn't warn about this, but clang does; remove them. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Add a qemu extented register range to the standard vga mmio bar. Right nowe there are two registers: One readonly register returning the size of the region (so we can easily add more registers there if needed) and one endian control register, so guests (especially ppc) can flip the framebuffer endianness as they need it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Gonglei 提交于
The function may be called by qmp command, we should report error message to the caller. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Device should be removed from global boot list when it is hot-unplugged. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
On this way, we can assure the new bootindex take effect during vm rebooting. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
On this way, we can assure the new bootindex take effect during vm rebooting. Meanwhile set the initial value of bootindex to -1. Because ide devcies's unit property maybe do not initialize when set_bootindex function is called, so that we don't know its suffix. So we have to save the call add_boot_device_path() on ide realize/init function. When we want to change bootindex during vm rebooting, we can call it in setter function. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
At present, nvma cannot boot. However, it provides already a bootindex property, so change bootindex to qom for nvma device, but not call add_boot_device_path. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Because usb-storage rely on scsi-disk which is created in usb_msg_realize_storage(), so we should store the SCSIDevice pointer in MSDState struct. Only in this way, we can change the global boot_order_list when we want to change the bootindex during vm rebooting by calling object_property_set_int(Object(SCSIDevice),). Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Since the "bootindex" property is a QOM property and not a qdev property now, we must alias it explicitly for virtio-blk-pci, as well as CCW and s390-virtio. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindexA/B form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Since the "bootindex" property is a QOM property and not a qdev property now, we must alias it explicitly for virtio-net-pci, as well as CCW and s390-virtio. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. At present, isa_ne2000 device does not support to boot os, so we register two seprate qom getter/setter functions. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
when we remove bootindex form qdev.property to qom.property, we can use those functions set/get bootindex property for all correlative devices. Meanwhile set the initial value of bootindex to -1. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-