Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org

Now that all the char backends have been converted to the QAPI
framework we can remove the machinery for handling old style
backends.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-5-git-send-email-peter.maydell@linaro.org

Convert the udp char backend to the new style QAPI framework.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-4-git-send-email-peter.maydell@linaro.org

Currently you can specify whether you want a UDP chardev backend
to be IPv4 or IPv6 using the ipv4 or ipv6 options if you use the
QemuOpts parsing code in inet_dgram_opts(). However the QMP struct
parsing code in socket_dgram() doesn't provide this flexibility
(which in turn prevents us from converting the UDP backend handling
to the new style QAPI framework).

Use the existing inet_addr_to_opts() function to convert the
remote->inet address to option strings; this handles ipv4 and
ipv6 flags as well as host and port. (It will also convert any
'to' specification, which is harmless as it is ignored in this
context.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-3-git-send-email-peter.maydell@linaro.org

Convert the socket char backend to the new style QAPI framework;
this allows it to return an Error ** to callers who might not
want it to print directly about socket failures.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-2-git-send-email-peter.maydell@linaro.org

Two minor sdl2 fixes.

# gpg: Signature made Tue 16 Sep 2014 07:20:37 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-sdl-20140916-1:
  sdl2: keymap fixups
  sdl2: drop sdl_zoom.h
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

spice: call qemu_spice_set_passwd() during init

# gpg: Signature made Tue 16 Sep 2014 07:11:22 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20140916-2:
  spice: call qemu_spice_set_passwd() during init
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.

This solves losing password when changing expiration in qemu monitor.

https://bugzilla.redhat.com/show_bug.cgi?id=1138639Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Make a few keys works correctly in SDL2.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It isn't used.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* remotes/qmp-unstable/queue/qmp:
  exec: file_ram_alloc(): print error when prealloc fails
  monitor: fix debug print compiling error
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches

# gpg: Signature made Fri 12 Sep 2014 16:09:43 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (22 commits)
  qcow2: Add falloc and full preallocation option
  raw-posix: Add falloc and full preallocation option
  qapi: introduce PreallocMode and new PreallocModes full and falloc.
  block: don't convert file size to sector size
  block: round up file size to nearest sector
  iotests: Send the correct fd in socket_scm_helper
  blockdev: Refuse to drive_del something added with blockdev-add
  block: extend BLOCK_IO_ERROR with reason string
  dataplane: fix virtio_blk_data_plane_create() op blocker error path
  qemu-iotests: Run 025 for Archipelago block driver
  block/archipelago: Implement bdrv_truncate()
  block: Make the block accounting functions operate on BlockAcctStats
  block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_
  block: Extract the block accounting code
  block: Extract the BlockAcctStats structure
  IDE: MMIO IDE device control should be little endian
  thread-pool: Drop unnecessary includes
  xen: Drop redundant bdrv_close() from pci_piix3_xen_ide_unplug()
  xen_disk: Plug memory leak on error path
  qemu-io: Clean up openfile() after commit 2e40134b
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix pixman build failure.

# gpg: Signature made Mon 15 Sep 2014 07:15:11 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-console-20140915-1:
  configure: check for pixman-1 version
  pixman: update internal copy to pixman-0.32.6
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. If pixman doesn't meet the version requirement, qemu
will fail to build with following message:

qemu/ui/qemu-pixman.c: In function ‘qemu_pixelformat_from_pixman’:
qemu/ui/qemu-pixman.c:42: error: ‘PIXMAN_TYPE_RGBA’ undeclared (first use in this function)
qemu/ui/qemu-pixman.c:42: error: (Each undeclared identifier is reported only once
qemu/ui/qemu-pixman.c:42: error: for each function it appears in.)

This patch fixes the problem by checking the pixman version.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit a93a3af9 introduces use of PIXMAN_TYPE_RGBA, but it's only available
in pixman >= 0.21.8. Although commit f27b2e1d bumped pixman to pixman-0.28.2,
but the change was reverted later by 7b1b5d19.

This patch updates internal copy of pixman to pixman-0.32.6 to fix the
problem.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.

# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (21 commits)
  gdbstub: init mon_chr through qemu_chr_alloc
  pckbd: adding new fields to vmstate
  mc146818rtc: add missed field to vmstate
  piix: do not set irq while loading vmstate
  serial: fixing vmstate for save/restore
  parallel: adding vmstate for save/restore
  fdc: adding vmstate for save/restore
  cpu: init vmstate for ticks and clock offset
  apic_common: vapic_paddr synchronization fix
  vl: use QLIST_FOREACH_SAFE to visit change state handlers
  exec: add parameter errp to gethugepagesize
  exec: report error when memory < hpagesize
  hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
  memory: add parameter errp to memory_region_init_rom_device
  memory: add parameter errp to memory_region_init_ram
  exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
  rules.mak: Fix DSO build by pulling in archive symbols
  util: Don't link host-utils.o if it's empty
  util: Move general qemu_getauxval to util/getauxval.c
  trace: Only link generated-tracers.o with "simple" backend
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If memory allocation fails when using the -mem-prealloc command-line
option, QEMU exits without printing any error information to
the user:

 # qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
 # echo $?
 1

This commit adds an error message, so that we print instead:

 # qemu [...] -m 1G -mem-prealloc -mem-path /dev/hugepages
 qemu: unable to map backing store for hugepages: Cannot allocate memory
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

error: 'i' undeclared (first use in this function)
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

target-arm:
 * add "linux,stdout-path" to the virt DTB
 * fix a long standing bug with IRQ disabling on Cortex-M CPUs
 * implement input interrupt logic in the PL061
 * fix failure to load correct SP/PC on reset of Cortex-M CPUs
   if the vector table is not in a ROM-blob-in-RAM
 * provide flash devices for boot ROMs in the virt board
 * implement architectural watchpoints
 * fix misimplementation of Inner Shareable TLB operations that
   caused instability of guests in TCG SMP configurations
 * configure PL011 and PL031 in the virt board correctly with
   level-triggered interrupts rather than edge-triggered
 * support providing a device tree blob to ROM (firmware)
   images as well as to kernels

# gpg: Signature made Fri 12 Sep 2014 14:19:08 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140912: (23 commits)
  hw/arm/boot: enable DTB support when booting ELF images
  hw/arm/boot: load device tree to base of DRAM if no -kernel option was passed
  hw/arm/boot: pass an address limit to and return size from load_dtb()
  hw/arm/boot: load DTB as a ROM image
  hw/arm/virt: fix pl011 and pl031 irq flags
  target-arm: Make *IS TLB maintenance ops affect all CPUs
  target-arm: Push legacy wildcard TLB ops back into v6
  target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0
  target-arm: Remove comment about MDSCR_EL1 being dummy implementation
  target-arm: Set DBGDSCR.MOE for debug exceptions taken to AArch32
  target-arm: Implement handling of fired watchpoints
  target-arm: Move extended_addresses_enabled() to internals.h
  target-arm: Implement setting of watchpoints
  cpu-exec: Make debug_excp_handler a QOM CPU method
  exec.c: Record watchpoint fault address and direction
  exec.c: Provide full set of dummy wp remove functions in user-mode
  exec.c: Relax restrictions on watchpoint length and alignment
  hw/arm/virt: Provide flash devices for boot ROMs
  target-arm: Fix broken indentation in arm_cpu_reest()
  target-arm: Fix resetting issues on ARMv7-M CPUs
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds a new option preallocation for raw format, and implements
falloc and full preallocation.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch prepares for the subsequent patches.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

and avoid converting it back later.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoît Canet <benoit.canet@nodalink.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.

This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add support for loading DTB images when booting ELF images using
-kernel. If there are no conflicts with the placement of the ELF
segments, the DTB image is loaded at the base of RAM.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-5-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If we are running the 'virt' machine, we may have a device tree blob but no
kernel to supply it to if no -kernel option was passed. In that case, copy it
to the base of RAM where it can be picked up by a bootloader.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-4-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an address limit input parameter to load_dtb() so that we can
tell load_dtb() how much memory the dtb is allowed to consume. If
the dtb doesn't fit, return 0, otherwise return the actual size of
the loaded dtb.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-3-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In order to make the device tree blob (DTB) available in memory not only at
first boot, but also after system reset, use rom_blob_add_fixed() to install
it into memory.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1410453915-9344-2-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The pl011 and pl031 devices both use level triggered interrupts,
but the device tree we construct was incorrectly telling the
kernel to configure the GIC to treat them as edge triggered.
This meant that output from the pl011 would hang after a while.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1410274423-9461-1-git-send-email-peter.maydell@linaro.org
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Cc: qemu-stable@nongnu.org

The ARM architecture defines that the "IS" variants of TLB
maintenance operations must affect all TLBs in the Inner Shareable
domain, which for us means all CPUs. We were incorrectly implementing
these to only affect the current CPU, which meant that SMP TCG
operation was unstable.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1410274883-9578-3-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org

When we implemented ARMv8 in QEMU we retained our legacy loose
wildcarded decoding of the TLB maintenance operations for v7
and earlier CPUs and provided the correct stricter decode for
v8. However the loose decode is in fact wrong for v7MP, because
it doesn't correctly implement the operations which must apply
to every CPU in the Inner Shareable domain.

Move the legacy wildcarding from the not_v8 reginfo array
into the not_v7 array, and move the strictly decoded operations
from the v8 reginfo to v7 or v7mp arrays as appropriate.

Cache and TLB lockdown legacy wildcarding remains in the
not_v8 array for the moment.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1410274883-9578-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org

Implement debug registers DBGVCR, OSDLR_EL1 and MDCCSR_EL0
(as dummy or limited-functionality). 32 bit Linux kernels will
access these at startup so they are required for breakpoints
and watchpoints to be supported.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MDSCR_EL1 has actual functionality now; remove the out of date
comment that claims it is a dummy implementation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For debug exceptions taken to AArch32 we have to set the
DBGDSCR.MOE (Method Of Entry) bits; we can identify the
kind of debug exception from the information in
exception.syndrome.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the ARM debug exception handler for dealing with
fired watchpoints.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Move the utility function extended_addresses_enabled() into
internals.h; we're going to need to call it from op_helper.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement support for setting QEMU watchpoints based on the
values the guest writes to the ARM architected watchpoint
registers. (We do not yet report the firing of the watchpoints
to the guest, so they will just be ignored.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make the debug_excp_handler target specific hook into a QOM
CPU method.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When we check whether we've hit a watchpoint we know the address
that we were attempting to access and whether it was a read or a
write. Record this information in the CPUWatchpoint struct so that
target-specific code can report it to the guest.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

We already provide dummy versions of the cpu_watchpoint_insert
and cpu_watchpoint_remove_all functions when CONFIG_USER_ONLY
is defined. Complete the set by providing cpu_watchpoint_remove
and cpu_watchpoint_remove_by_ref as well.

This allows target-* code using these functions to avoid
some ifdeffery.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>