Achieved by:

- Remembering the server fd with a global variable, in order to access
  it from nbd_client_closed.

- Checking nbd_can_accept() and updating server_fd handler whenever
  client connects or disconnects.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <1432032670-15124-3-git-send-email-famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On POWER8 systems, KVM checks if VCPU is running on primary threads,
and that secondary threads are offline. If this is not the case,
ioctl() fails with errno set to EBUSY.

QEMU aborts with a non explicit error message:
$ ./qemu-system-ppc64 --nographic -machine pseries,accel=kvm
error: kvm run failed Device or resource busy

To help user to diagnose the problem, this patch adds an informative
error message.

There is no easy way to check if SMT is enabled before starting the VCPU,
and as this case is the only one setting errno to EBUSY, we just check
the errno value to display a message.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Message-Id: <1431976007-20503-1-git-send-email-lvivier@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Disabling CONFIG_PARALLEL cause removing parallel_hds_isa_init defined in
parallel.c. This function is called during initialization of some boards so
disabling CONFIG_PARALLEL cause build failure.

This patch moves parallel_hds_isa_init to hw/isa/isa-bus.c so it is included
in case of disabled CONFIG_PARALLEL. Build is successful but qemu will abort
with "Unknown device" error when function is called.
Signed-off-by: NMiroslav Rezanina <mrezanin@redhat.com>
Message-Id: <1431509970-32154-1-git-send-email-mrezanin@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Patch queue for s390 - 2015-06-05

This time there are a lot of s390x TCG emulation bug fixes - almost all
of them from Aurelien, who returned from nirvana :).

# gpg: Signature made Fri Jun  5 00:39:27 2015 BST using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"

* remotes/agraf/tags/signed-s390-for-upstream: (34 commits)
  target-s390x: Only access allocated storage keys
  target-s390x: fix MVC instruction when areas overlap
  target-s390x: use softmmu functions for mvcp/mvcs
  target-s390x: support non current ASC in s390_cpu_handle_mmu_fault
  target-s390x: add a cpu_mmu_idx_to_asc function
  target-s390x: implement high-word facility
  target-s390x: implement load-and-trap facility
  target-s390x: implement miscellaneous-instruction-extensions facility
  target-s390x: implement LPDFR and LNDFR instructions
  target-s390x: implement TRANSLATE EXTENDED instruction
  target-s390x: implement TRANSLATE AND TEST instruction
  target-s390x: implement LOAD FP INTEGER instructions
  target-s390x: move SET DFP ROUNDING MODE to the correct facility
  target-s390x: move STORE CLOCK FAST to the correct facility
  target-s390x: change CHRL and CGHRL format to RIL-b
  target-s390x: fix CLGIT instruction
  target-s390x: fix exception for invalid operation code
  target-s390x: implement LAY and LAEY instructions
  target-s390x: move a few instructions to the correct facility
  target-s390x: detect tininess before rounding for FP operations
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We allocate ram_size / PAGE_SIZE storage keys, so we need to make sure that
we only access that many. Unfortunately the code can overrun this array by
one, potentially overwriting unrelated memory.

Fix it by limiting storage keys to their scope.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

The MVC instruction and the memmove C funtion do not have the same
semantic when memory areas overlap:

MVC: When the operands overlap, the result is obtained as if the
operands were processed one byte at a time and each result byte were
stored immediately after fetching the necessary operand byte.

memmove: Copying takes place as though the bytes in src are first copied
into a temporary array that does not overlap src or dest, and the bytes
are then copied from the temporary array to dest.

The behaviour is therefore the same when the destination is at a lower
address than the source, but not in the other case. This is actually a
trick for propagating a value to an area. While the current code detects
that and call memset in that case, it only does for 1-byte value. This
trick can and is used for propagating two or more bytes to an area.

In the softmmu case, the call to mvc_fast_memmove is correct as the
above tests verify that source and destination are each within a page,
and both in a different page. The part doing the move 8 bytes by 8 bytes
is wrong and we need to check that if the source and destination
overlap, they do with a distance of minimum 8 bytes before copying 8
bytes at a time.

In the user code, we should check check that the destination is at a
lower address than source or than the end of the source is at a lower
address than the destination before calling memmove. In the opposite
case we fallback to the same code as the softmmu one. Note that l
represents (length - 1).
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

mvcp and mvcs helper get access to the physical memory by a call to
mmu_translate for the virtual to real conversion and then using ldb_phys
and stb_phys to physically access the data. In practice this is quite
slow because it bypasses the QEMU softmmu TLB and because stb_phys calls
try to invalidate the corresponding memory for each access.

Instead use cpu_ldb_{primary,secondary} for the loads and
cpu_stb_{primary,secondary} for the stores. Ideally this should be
further optimized by a call to memcpy, but that already improves the
boot time of a guest by a factor 1.8.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

s390_cpu_handle_mmu_fault currently looks at the current ASC mode
defined in PSW mask instead of the MMU index. This prevent emulating
easily instructions using a specific ASC mode. Fix that by using the
MMU index converted back to ASC using the just added cpu_mmu_idx_to_asc
function.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Use constants to define the MMU indexes, and add a function to do
the reverse conversion of cpu_mmu_index.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Besides RISBHG and RISBLG, all high-word instructions are not
implemented. Fix that.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

At the same time move the trap code from op_ct into gen_trap and use it
for all new functions. The value needs to be stored back to register
before the exception, but also before the brcond (as we don't use
temp locals). That's why we can't use wout helper.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

RISBGN is the same as RISBG, but without setting the condition code.
CLT and CLGT are the same as CLRT and CLGRT, but using memory for the
second operand.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This complete the floating point support sign handling facility.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

It is part of the basic zArchitecture instructions.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

It is part of the basic zArchitecture instructions. Allow it to be call
from EXECUTE.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This is needed to pass the gcc.c-torture/execute/ieee/20010114-2.c test
in the gcc testsuite.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

It belongs to the DFP rounding facility.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

STORE CLOCK FAST should be in the SCF facility.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Change to match the PoP. In practice both format RIL-a and RIL-b have
the same fields. They differ on the way we decode the fields, and it's
done correctly in QEMU.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The COMPARE LOGICAL IMMEDIATE AND TRAP instruction should compare the
numbers as unsigned, as its name implies.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.

This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This complete the general-instructions-extension facility, enable it.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: NAlexander Graf <agraf@suse.de>

LY is part of the long-displacement facility.
RISBHG and RISBLG are part of the high-word facility.
STCMH is part of the z/Architecture.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The s390x floating point unit detects tininess before rounding, so set
the softfloat fp_status up appropriately.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

LOAD LENGTHENED and LOAD ROUNDED are considered as FP operations and
thus need to convert input sNaN into corresponding qNaN.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The cpu_mmu_index function wrongly looks at PSW P bit to determine the
MMU index, while this bit actually only control the use of priviledge
instructions. The addressing mode is detected by looking at the PSW ASC
bits instead.

This used to work more or less correctly up to kernel 3.6 as the kernel
was running in primary space and userland in secondary space. Since
kernel 3.7 the default is to run the kernel in home space and userland
in primary space. While the current QEMU code seems to work it open some
security issues, like accessing the lowcore memory in R/W mode from a
userspace process once it has been accessed by the kernel (it is then
cached by the QEMU TLB).

At the same time change the MMU_USER_IDX value so that it matches the
value used in recent kernels.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

runtime_exception computes the psw.addr value using the actual exception
address and the instruction length computed by calling the get_ilen
function. However as explained above the get_ilen code, it returns the
actual instruction length, and not the ILC. Therefore there is no need to
multiply the value by 2.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.

This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.

Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.

This fixes random segmentation faults seen in the guest.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Save the timer target value in the SPT helper, so that the STPT helper
can compute the remaining time.

This allow the Linux kernel to correctly do time accounting.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The STCKC instruction just returns the last written clock comparator
value and KVM already provides the corresponding variable.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that clock_value is only used in one place, we can inline it in
the STCK helper.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

LOAD POSITIVE instructions (LPR, LPGR and LPGFR) set the following
condition code:
  0: Result zero; no overflow
  1: --
  2: Result greater than zero; no overflow
  3: Overflow

The current code wrongly returns 1 instead of 2 in case of a result
greater than 0. This patches fixes that. This fixes the marshalling of
the value '0L' in Python.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Commit 7a6c7067 optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).

This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: NAlexander Graf <agraf@suse.de>

pc, acpi, virtio, tpm

This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu Jun  4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (28 commits)
  vhost: logs sharing
  hw/acpi: piix4_pm_init(): take fw_cfg object no more
  hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
  hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
  pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
  docs: Add PXB documentation
  apci: fix PXB behaviour if used with unsupported BIOS
  hw/pxb: add numa_node parameter
  hw/pci: add support for NUMA nodes
  hw/pxb: add map_irq func
  hw/pci: inform bios if the system has extra pci root buses
  hw/pci: introduce PCI Expander Bridge (PXB)
  hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
  hw/acpi: remove from root bus 0 the crs resources used by other buses.
  hw/acpi: add _CRS method for extra root busses
  hw/apci: add _PRT method for extra PCI root busses
  hw/acpi: add support for i440fx 'snooping' root busses
  hw/pci: extend PCI config access to support devices behind PXB
  hw/i386: query only for q35/pc when looking for pci host bridge
  hw/pci: made pci_bus_num a PCIBusClass method
  ...

Conflicts:
	hw/i386/pc_piix.c
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Patch queue for ppc - 2015-06-03

Highlights this time around:

  - sPAPR: endian fixes, speedups, bug fixes, hotplug basics
  - add default ram size capability for machines (sPAPR defaults to 512MB now)

# gpg: Signature made Wed Jun  3 22:59:09 2015 BST using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg:                 aka "Alexander Graf <alex@csgraf.de>"

* remotes/agraf/tags/signed-ppc-for-upstream: (40 commits)
  softmmu: support up to 12 MMU modes
  tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS
  tci: do not use CPUArchState in tcg-target.h
  Add David Gibson for sPAPR in MAINTAINERS file
  pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations
  spapr: override default ram size to 512MB
  machine: add default_ram_size to machine class
  spapr_pci: emit hotplug add/remove events during hotplug
  spapr_pci: enable basic hotplug operations
  pci: make pci_bar useable outside pci.c
  spapr_pci: create DRConnectors for each PCI slot during PHB realize
  spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge
  spapr_drc: add spapr_drc_populate_dt()
  spapr_events: event-scan RTAS interface
  spapr_events: re-use EPOW event infrastructure for hotplug events
  spapr_rtas: add ibm, configure-connector RTAS interface
  spapr: add rtas_st_buffer_direct() helper
  spapr_rtas: add get-sensor-state RTAS interface
  spapr_rtas: add set-indicator RTAS interface
  spapr_rtas: add get/set-power-level RTAS interfaces
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>