g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Code mixes uint32_t, int and size_t.  Very unlikely to go wrong in
practice, but clean it up anyway.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB.  Clean it
up anyway.  Size overflow now fails assertions.

Bonus: saves a whole bunch of silly casts.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

No caller is checking the value, so all errors get ignored, usually
silently.  assert() instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This adds two optimizations using the non-zero bit mask.  In some cases
involving shifts or ANDs the value can become zero, and can thus be
optimized to a move of zero.  Second, useless zero-extension or an
AND with constant can be detected that would only zero bits that are
already zero.

The main advantage of this optimization is that it turns zero-extensions
into moves, thus enabling much better copy propagation (around 1% code
reduction).  Here is for example a "test $0xff0000,%ecx + je" before
optimization:

 mov_i64 tmp0,rcx
 movi_i64 tmp1,$0xff0000
 discard cc_src
 and_i64 cc_dst,tmp0,tmp1
 movi_i32 cc_op,$0x1c
 ext32u_i64 tmp0,cc_dst
 movi_i64 tmp12,$0x0
 brcond_i64 tmp0,tmp12,eq,$0x0

and after (without patch on the left, with on the right):

 movi_i64 tmp1,$0xff0000                 movi_i64 tmp1,$0xff0000
 discard cc_src                          discard cc_src
 and_i64 cc_dst,rcx,tmp1                 and_i64 cc_dst,rcx,tmp1
 movi_i32 cc_op,$0x1c                    movi_i32 cc_op,$0x1c
 ext32u_i64 tmp0,cc_dst
 movi_i64 tmp12,$0x0                     movi_i64 tmp12,$0x0
 brcond_i64 tmp0,tmp12,eq,$0x0           brcond_i64 cc_dst,tmp12,eq,$0x0

Other similar cases: "test %eax, %eax + jne" where eax is already 32-bit
(after optimization, without patch on the left, with on the right):

 discard cc_src                          discard cc_src
 mov_i64 cc_dst,rax                      mov_i64 cc_dst,rax
 movi_i32 cc_op,$0x1c                    movi_i32 cc_op,$0x1c
 ext32u_i64 tmp0,cc_dst
 movi_i64 tmp12,$0x0                     movi_i64 tmp12,$0x0
 brcond_i64 tmp0,tmp12,ne,$0x0           brcond_i64 rax,tmp12,ne,$0x0

"test $0x1, %dl + je":

 movi_i64 tmp1,$0x1                      movi_i64 tmp1,$0x1
 discard cc_src                          discard cc_src
 and_i64 cc_dst,rdx,tmp1                 and_i64 cc_dst,rdx,tmp1
 movi_i32 cc_op,$0x1a                    movi_i32 cc_op,$0x1a
 ext8u_i64 tmp0,cc_dst
 movi_i64 tmp12,$0x0                     movi_i64 tmp12,$0x0
 brcond_i64 tmp0,tmp12,eq,$0x0           brcond_i64 cc_dst,tmp12,eq,$0x0

In some cases TCG even outsmarts GCC. :)  Here the input code has
"and $0x2,%eax + movslq %eax,%rbx + test %rbx, %rbx" and the optimizer,
thanks to copy propagation, does the following:

 movi_i64 tmp12,$0x2                     movi_i64 tmp12,$0x2
 and_i64 rax,rax,tmp12                   and_i64 rax,rax,tmp12
 mov_i64 cc_dst,rax                      mov_i64 cc_dst,rax
 ext32s_i64 tmp0,rax                  -> nop
 mov_i64 rbx,tmp0                     -> mov_i64 rbx,cc_dst
 and_i64 cc_dst,rbx,rbx               -> nop
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add a "mask" field to the tcg_temp_info struct.  A bit that is zero
in "mask" will always be zero in the corresponding temporary.
Zero bits in the mask can be produced from moves of immediates,
zero-extensions, ANDs with constants, shifts; they can then be
be propagated by logical operations, shifts, sign-extensions,
negations, deposit operations, and conditional moves.  Other
operations will just reset the mask to all-ones, i.e. unknown.

[rth: s/target_ulong/tcg_target_ulong/]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The next patch will add to the TCG optimizer a field that should be
non-zero in the default case.  Thus, replace the memset of the
temps array with a loop.  Only the state field has to be up-to-date,
because others are not used except if the state is TCG_TEMP_COPY
or TCG_TEMP_CONST.

[rth: Extracted the loop to a function.]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
  PPC: KVM: Add support for EPR with KVM
  openpic: export e500 epr enable into a ppc.c function
  Update Linux kernel headers
  PPC: e500: Change in-memory order of load blobs
  PPC: Provide zero SVR for -cpu e500mc and e5500
  PPC: E500: Calculate loading blob offsets properly
  openpic: set mixed mode as supported
  openpic: unify gcr mode mask updates
  openpic: move gcr write into a function

* 's390-for-upstream' of git://repo.or.cz/qemu/agraf:
  s390: Add a hypercall registration interface.
  target-s390x: Unregister reset callback on finalization
  s390x: fix indentation
  s390: Add CPU reset handler
  s390x: Remove inline function ebcdic_put and related data from cpu.h
  S390: Enable -cpu help and QMP query-cpu-definitions
  s390: Move IPL code into a separate device
  s390: new contributions GPLv2 or later

* 'axp-next' of git://github.com/rth7680/qemu:
  alpha-linux-user: Correct select
  alpha-linux-user: Translate fcntl l_type

Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since commit "s390: Add CPU reset handler" the CPU's instance_init
registers a reset callback. Unregister that on instance_finalize.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

In one of the last commits we accidently got 3-space indentation into
the tree. Fix it up so it's 4 spaces wide.
Reported-by: NAndreas Faerber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add a CPU reset handler to have all CPUs in a PoP compliant
state.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: move hw/hw.h into existing ifdef]
Signed-off-by: NAlexander Graf <agraf@suse.de>

The function is only used in misc_helper.c, so move it to that file.

This reduces the size of debug executables (compiled without optimization)
because they get unused code and data for each compilation which includes
cpu.h.

Executables with optimization don't change their size.

ebcdic2ascii is currently unused and could be removed (not done here).

The array ascii2ebcdic must be accessed with an unsigned index, therefore
(int)ascii[i] was replaced by (uint8_t)ascii[i]. The old code would have
failed for a signed char less than 0. The current code only converts
"QEMU" and spaces to EBCDIC, so there is no problem today.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to

- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
  was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM]
Signed-off-by: NAlexander Graf <agraf@suse.de>

IBMs s390 contributions were meant to to be gplv2 or later (since
we were contributing to qemu). Several of the s390 specific files
link to gpl code anyway, so lets clarify the licence statement for
new contributions for those files that we have touched multiple
times or will likely touch again.

This patch does not touch files that mostly deal with tcg.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch links KVM EPR support to the existing TCG support we have now.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Enabling and disabling the EPR capability (mpic_proxy) is a system
wide operation. As such, it belongs into the ppc.c file, since that's
where PPC specific machine wide logic happens.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Based on kvm.git a843fac (next) plus dfdebc24 (master).
Signed-off-by: NAlexander Graf <agraf@suse.de>

Today, we load

  <kernel> <initrd> <dtb>

into memory in that order. However, Linux has a bug where it can only
handle the dtb if it's within the first 64MB of where <kernel> starts.

So instead, let's change the order to

  <kernel> <dtb> <initrd>

making Linux happy.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Even though our -cpu types for e500mc and e5500 are no real CPUs that
actually have version registers, a guest might still want to access
said version register and that has to succeed for a guest to be happy.

So let's expose a zero SVR value on E500_SVR SPR reads.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We have 3 blobs we need to load when booting the system:

  - kernel
  - initrd
  - dtb

We place them in physical memory in that order. At least we should.
This patch fixes the location calculation up to take any module into
account, fixing the dtb offset along the way.
Reported-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The Raven MPIC implementation supports the "Mixed" mode to work with
an i8259. While we don't implement mixed mode, we should mark it as
a supported mode in the mode bitmap.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The mode mask already masks out bits we don't care about, so the
actual handling code can stay intact regardless.
Signed-off-by: NAlexander Graf <agraf@suse.de>

The GCR register contains too much functionality to be covered inside
of the register switch statement. Move it out into a separate function.
Signed-off-by: NAlexander Graf <agraf@suse.de>

# By Wenchao Xia
# Via Luiz Capitulino
* luiz/queue/qmp:
  HMP: add sub command table to info
  HMP: move define of mon_cmds
  HMP: add infrastructure for sub command
  HMP: delete info handler
  HMP: add QDict to info callback handler

Order of arguments of kvm_virtio_pci_irqfd_release
got mixed up in all calls.
As a result users see assertions during cleanup.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Tested-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add a documentation section "Methods" and discuss among others how to
handle overriding virtual methods.

Clarify DeviceClass::realize documentation and refer to the above.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit eb8eb53e5846a957cf333f2e1ec8cb6e0c04 ("libcacard: rewrite
Makefile in non-recursive style") refactored libcacard/Makefile so it
can be included by the top-level Makefile.

The top-level clean target still loops over subdirectories, including
libcacard/, to invoke recursive clean.  Remove libcacard from the
recursive clean since its files are already included at the top level.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

  Now info command takes a table of sub info commands,
and changed do_info() to do_info_help() to do help funtion
only.
 Note that now "info <unknown-topic>" returns error instead
of list of info topics.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  Because mon_cmds may use info_cmds, so adjust the declare sequence
of them.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  This patch make parsing of hmp command aware of that it may
have sub command. Also discard simple encapsulation function
monitor_find_command(). For case "@command ", space after
@command is filtered out.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

  Now cmd and info handler have same format, so delete info handler.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>