Add definitions for smbios entry point (anchor), and for type 2
(base board) structure which is required by some versions of OS X.

Remove definition for type 20 (memory device mapped address)
structure, which is no longer required as of smbios spec v2.5.

Update all other structure definitions to bring them into
compliance with smbios spec v2.8.

This patch contains no functional changes.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Rename the following symbols:

  - smbios_set_type1_defaults() to the more general smbios_set_defaults();
  - bool smbios_type1_defaults to the more general smbios_defaults;
  - smbios_get_table() to smbios_get_table_legacy();

This patch contains no functional changes.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add the following two functions:

  - e820_get_num_entries() - query the size of the e820 table
  - e820_get_entry() - grab an entry matching a given set of criteria

This interface is currently necessary for creating type 19
(memory array mapped address) structures in smbios.
Signed-off-by: NGabriel Somlo <somlo@cmu.edu>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

At the moment, 2.1 and 2.0 machines are identical.
As several people are working on incompatible changes
to the PC machine, collaboration will be made easier
by merging this place-holder.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

target-arm queue:
 * implement XScale cache lockdown cp15 ops
 * fix v7M CPUID base register
 * implement WFE and YIELD as yields for A64
 * fix A64 "BLR LR"
 * support Cortex-A57 in virt machine model
 * a few other minor AArch64 bugfixes

# gpg: Signature made Thu 01 May 2014 15:42:17 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140501:
  hw/arm/virt: Add support for Cortex-A57
  hw/arm/virt: Put GIC register banks on 64K boundaries
  hw/arm/virt: Create the GIC ourselves rather than (ab)using a15mpcore_priv
  target-arm: Correct a comment refering to EL0
  target-arm: A64: Fix a typo when declaring TLBI ops
  target-arm: A64: Handle blr lr
  target-arm: Make vbar_write 64bit friendly on 32bit hosts
  target-arm: implement WFE/YIELD as a yield for AArch64
  armv7m_nvic: fix CPUID Base Register
  target-arm: Implement XScale cache lockdown operations as NOPs
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches

# gpg: Signature made Wed 30 Apr 2014 19:19:32 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (31 commits)
  curl: Fix hang reading from slow connections
  curl: Ensure all informationals are checked for completion
  curl: Eliminate unnecessary use of curl_multi_socket_all
  curl: Remove unnecessary explicit calls to internal event handler
  curl: Remove erroneous sleep waiting for curl completion
  curl: Fix return from curl_read_cb with invalid state
  curl: Remove unnecessary use of goto
  curl: Fix long line
  block/vdi: Error out immediately in vdi_create()
  block/bochs: Fix error handling for seek_to_sector()
  qcow2: Check min_size in qcow2_grow_l1_table()
  qcow2: Catch bdrv_getlength() error
  block: Use correct width in format strings
  qcow2: Avoid overflow in alloc_clusters_noref()
  block: Use error_abort in bdrv_image_info_specific_dump()
  block: Fix open_flags in bdrv_reopen()
  Revert "block: another bdrv_append fix"
  block: Unlink temporary files in raw-posix/win32
  block: Remove BDRV_O_COPY_ON_READ for bs->file
  block: Create bdrv_backing_flags()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add helpers for enabling kvm capabilities and convert the existing
s390x and ppc users to use them.

# gpg: Signature made Wed 30 Apr 2014 14:48:45 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/kvm_cap_helpers:
  ppc: use kvm_vcpu_enable_cap()
  s390x: use kvm_vcpu_enable_cap()
  kvm: add kvm_{vm,vcpu}_enable_cap
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: add secondary stdvga variant

# gpg: Signature made Mon 28 Apr 2014 10:11:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-2:
  add secondary-vga to display-vga test
  add display-vga test
  vga: add secondary stdvga variant
  vga: allow non-global vmstate
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Support the Cortex-A57 in the virt machine model.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-4-git-send-email-peter.maydell@linaro.org

For an AArch64 CPU which supports 64K pages, having the GIC
register banks at 4K offsets is potentially awkward. Move
them out to being at 64K offsets. (This is harmless for
AArch32 CPUs and for AArch64 CPUs with 4K pages, so it is simpler
to use the same offsets everywhere than to try to use 64K offsets
only for AArch64 host CPUs.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-3-git-send-email-peter.maydell@linaro.org

Rather than having the virt machine model create an a15mpcore_priv
device regardless of the actual CPU type in order to instantiate the GIC,
move to having the machine model create the GIC directly. This
corresponds to a system which uses a standalone GIC (eg the GIC-400)
rather than the one built in to the CPU core.

The primary motivation for this is to support the Cortex-A57,
which for a KVM configuration will use a GICv2, which is not
built into the CPU.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-2-git-send-email-peter.maydell@linaro.org

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1398926097-28097-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Harmless typo as opc1 defaults to zero and opc2 gets
re-declared to its correct value.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1398926097-28097-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For linked branches, updates to the link register happen
conceptually after the read of the branch target register.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Cc: qemu-stable@nongnu.org
Message-id: 1398926097-28097-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1398926097-28097-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Like was done for AArch32 for WFE, implement both WFE and YIELD as a
yield operation. This speeds up multi-core system emulation.
Signed-off-by: NRob Herring <rob.herring@linaro.org>
Message-id: 1397588401-20366-1-git-send-email-robherring2@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

cp15.c0_cpuid is never initialized for ARMv7-M; take the value directly
from cpu->midr instead.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Message-id: 1398036308-32166-1-git-send-email-rabin@rab.in
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

XScale defines some implementation-specific coprocessor registers
for doing cache lockdown operations. Since QEMU doesn't model a
cache no proper implementation is possible, but NOP out the
registers so that guest code like u-boot that tries to use them
doesn't crash.

Reported-by: <prqek@centrum.cz>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

gtk: collection of fixes and cleanups by Cole Robinson

# gpg: Signature made Tue 29 Apr 2014 10:44:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-6:
  gtk: Fix accelerators being triggered twice with gtk3
  gtk: Fix -serial vc
  gtk: Use ctrl+alt+q for quit accelerator
  gtk: Remove use of deprecated stock items
  gtk: Don't use deprecated vte_terminal_get_adjustment
  gtk: Don't use deprecated gtk_image_menu_item_new_with_mnemonic
  configure: Re-run make if gtkabi/sdlabi is changed
  configure: Document --with-gtkabi
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

sdl2: mouse wheel support, ui config notify

# gpg: Signature made Tue 29 Apr 2014 11:17:01 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-sdl-2:
  sdl2: Support mouse wheel
  sdl2: add ui info setting.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

hda-audio: fix non-mixer codecs

# gpg: Signature made Tue 29 Apr 2014 10:03:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-audio-4:
  hda-audio: fix non-mixer codecs
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When receiving a new aio read request, we first look for an existing
transaction whose range will cover the read request by the time it
completes. However, we weren't checking that the existing transaction
was still active. If it had timed out, we were adding the request to a
transaction which would never complete and had already been cancelled,
resulting in a hang.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

According to the documentation, the correct way to ensure all
informationals have been returned by curl_multi_info_read is to loop
until it returns NULL.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

curl_multi_socket_all is a deprecated catch-all which checks for
activities on all open curl sockets. We have enough information from
the event loop to check only the sockets with activity. This change
removes use of curl_multi_socket_all in favour of
curl_multi_socket_action called with the relevant handle.

At the same time, it also ensures that the driver only checks for
completion of read operations after reading from a socket, rather than
both reading and writing.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Remove calls to curl_multi_do where the relevant handles are already
registered to the event loop.

Ensure that we kick off socket handling with CURL_SOCKET_TIMEOUT after
adding a new handle.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The driver will not start more than a fixed number of curl sessions.
If it needs more, it must wait for the completion of an existing one.
The driver was sleeping, which will prevent the main loop from
running, and therefore the event it's waiting on. It was also directly
calling its internal handler rather than waiting on existing
registered handlers to be called from the main loop.

This change causes it simply to wait for a period of time whilst
allowing the main loop to execute.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

A curl write callback is supposed to return the number of bytes it
handled.  curl_read_cb would have erroneously reported it had handled
all bytes in the event that the internal curl state was invalid.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This isn't any of the usually acceptable uses of goto.
Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMatthew Booth <mbooth@redhat.com>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, if an error occurs during the part of vdi_create() which
actually writes the image, the function stores -errno, but continues
anyway.

Instead of trying to write data which (if it can be written at all) does
not make any sense without the operations before succeeding (e.g.,
writing the image header), just error out immediately.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, seek_to_sector() returns -1 both for errors and unallocated
sectors, resulting in silent errors. As 0 is an invalid offset of data
clusters (bitmap_offset is greater than 0 because s->data_offset is
greater than 0), just return 0 for unallocated sectors and -errno in
case of error. This should then be propagated by bochs_read(), the sole
user of seek_to_sector().

That function also has a case of "return -1 in case of error", which is
fixed by this patch as well.

bochs_read() is called by bochs_co_read() which passes the return value
through, therefore it is indeed correct for bochs_read() to return
-errno.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

First, new_l1_size is an int64_t, whereas min_size is a uint64_t.
Therefore, during the loop which adjusts new_l1_size until it equals or
exceeds min_size, new_l1_size might overflow and become negative. The
comparison in the loop condition however will take it as an unsigned
value (because min_size is unsigned) and therefore recognize it as
exceeding min_size. Therefore, the loop is left with a negative
new_l1_size, which is not correct. This could be fixed by making
new_l1_size uint64_t.

On the other hand, however, by doing this, the while loop may take
forever. If min_size is e.g. UINT64_MAX, it will take new_l1_size
probably multiple overflows to reach the exact same value (if it reaches
it at all). Then, right after the loop, new_l1_size will be recognized
as being too big anyway.

Both problems require a ridiculously high min_size value, which is very
unlikely to occur; but both problems are also simply avoided by checking
whether min_size is sane before calculating new_l1_size (which should
still be checked separately, though).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The call to bdrv_getlength() from qcow2_check_refcounts() may result in
an error. Check this and abort if necessary.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Instead of blindly relying on a normal integer having a width of 32 bits
(which is a pretty good assumption, but we should not rely on it if
there is no need), use the correct format string macros.

This does not touch DEBUG output.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

alloc_clusters_noref() stores the cluster index in a uint64_t. However,
offsets are often represented as int64_t (as for example the return
value of alloc_clusters_noref() itself demonstrates). Therefore, we
should make sure all offsets in the allocated range of clusters are
representable using int64_t without overflows.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Convert existing users of KVM_ENABLE_CAP to new helper.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Make kvm_s390_enable_css_support() use new interface.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Provide helper functions for enabling capabilities (on a vcpu and on a vm).
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Currently, bdrv_image_info_specific_dump() uses an error variable for
visit_type_ImageInfoSpecific, but ignores the result. As this function
is used here with an output visitor to transform the ImageInfoSpecific
object to a generic QDict, an error should actually be impossible. It is
however better to assert that this is indeed the case. This is done by
this patch using error_abort instead of an unused local Error variable.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use the same function as bdrv_open() for determining what the right
flags for bs->file are. Without doing this, a reopen means that
bs->file loses BDRV_O_CACHE_WB or BDRV_O_UNMAP if bs doesn't have it as
well.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>