In order to allow overriding flags that are set by configure, we have to
append them instead of prepending as it is done so far.

v2: Clarify documentation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

control vector is saved/restored by virtio-pci,
it does not belong in virtio.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes segfault reported by Kevin Wolf,
and simplifies the code in msix_save.
Reported-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Otherwise if you hot remove an eepro100 NIC and then migrate,
you get:

  Unknown savevm section or instance 'eeprom' 0

on the destination side.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

destroy_nic() requires that NICInfo::private by a PCIDevice pointer,
but then goes on to require that the same pointer matches
VLANClientState::opaque.

That is no longer the case for virtio-net since qdev and wasn't
previously the case for rtl8139, ne2k_pci or eepro100.

Make the situation a lot more clear by maintaining a VLANClientState
pointer in NICInfo.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If no tap,sndbuf= arg is supplied, we use a default value. If
TUNSETSNDBUF fails in this case, we should not abort.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJohn Arbuckle <programmingkidx@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

":readahead=###:" suffix.

Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to not execute code we just compiled, let's replace signrom
with a shell script that does the same thing while staying compatible
to pretty much every system available.

This should make cross-compilation for windows easier.

aliguori: fix build when objdir != srcdir
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 707c0dbc.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

On reflection, perhaps it does make sense to set a default value for
the sndbuf= tap parameter.

For best effect, sndbuf= should be set to just below the capacity of
the physical NIC.

Setting it higher will cause packets to be dropped before the limit
is hit. Setting it much lower will not cause any problems unless
you set it low enough such that the guest cannot queue up new packets
before the NIC has emptied its queue.

In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500
byte MTU, 1Mb is a good choice for sndbuf.

If it turns out that txqueuelen is actually much lower than this, then
sndbuf is essentially disabled. In the event that txqueuelen is much
higher, it's unlikely that the NIC will be able to empty a 1Mb queue.

Thanks to Herbert Xu for this logic.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Cc: Herbert Xu <herbert.xu@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Attached patch lets configure find xen headers and xen libs
when called with --extra-cflags and --extra-ldflags options.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.

aliguori: fix build for linux-user
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add explicit padding to MIPS signal frame structures.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Enable NPTL support for MIPS usermode emulation.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Implement MIPS ll/sc instructions using atomic compare+exchange.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Implement cpu_set_tls for MIPS.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

The clone syscall takes 6 args.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* fix secondary bus setup.
 * use base->name instead of "FIXME" for device name.
   Yes, the device name is redundant.  Only for drivers converted
   to qdev already though.  Once all drivers are converted we can
   and should kill it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The only purpose DeviceType serves is creating a linked list of
DeviceInfo structs.  This removes DeviceType and add a next field to
DeviceInfo instead, so the DeviceInfo structs can be changed that way.
Elimitates a pointless extra level of indirection.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

BusInfo is filled with name and size (pretty much like I did for
DeviceInfo as well).  There is also a function pointer to print
bus-specific device information to the monitor.  sysbus is hooked
up there, I've also added a print function for PCI.

Device creation is slightly modified as well:  The device type search
loop now also checks the bus type while scanning the list instead of
complaining thereafter in case of a mismatch.  This effectively gives
each bus a private namespace for device names.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters.  Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

the qemu_malloc routines

Fixes getrlimit implementation that overwrote the result of the syscall
instead of converting it
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

makes socketcall 64-bit clean so it works on 64-bit big-endian systems
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

pipedes is an address, it should not be signed (breaks for addresses
> 0x80000000)
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

linux-user=yes is not a reliable identifier that linux-user targets
have been selected. user targets can be selected via --target-list
as well.

Removes the following warning

CC    i386-linux-user/syscall.o
cc1: warnings being treated as errors
/media/nfs/qemu/linux-user/syscall.c: In function ‘do_syscall’:
/media/nfs/qemu/linux-user/syscall.c:2219: warning: ‘array’ may be used uninitialized in this function
Signed-off-by: NVibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

This patch is fixing following issues :

- commit 8fea3602 was applied to
  do_getsockname instead of do_accept.
- Some syscalls were not checking properly the memory addresses passed
  as argument
- Add check before syscalls made for cases like do_getpeername() where
  we're using the address parameter after doing the syscall
- Fix do_accept to return EINVAL instead of EFAULT when parameters
  invalid to match with linux behaviour
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>