Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
切换分支/标签
  1. 20 2月, 2018 11 次提交
  3. 17 2月, 2018 1 次提交
  5. 15 2月, 2018 1 次提交
    • S
      vl: pause vcpus before stopping iothreads · 00d09fdb
      由 Stefan Hajnoczi 提交于 
      Commit dce8921b ("iothread: Stop threads
before main() quits") introduced iothread_stop_all() to avoid the
following virtio-scsi assertion failure:

  assert(blk_get_aio_context(d->conf.blk) == s->ctx);

Back then the assertion failed because when bdrv_close_all() made
d->conf.blk NULL, blk_get_aio_context() returned the global AioContext
instead of s->ctx.

The same assertion can still fail today when vcpus submit new I/O
requests after iothread_stop_all() has moved the BDS to the global
AioContext.

This patch hardens the iothread_stop_all() approach by pausing vcpus
before calling iothread_stop_all().

Note that the assertion failure is a race condition.  It is not possible
to reproduce it reliably.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180201110708.8080-1-stefanha@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
      00d09fdb
  7. 09 2月, 2018 3 次提交
  9. 07 2月, 2018 1 次提交
    • A
      tcg: Replace fprintf(stderr, "*\n" with error_report() · 493d89bf
      由 Alistair Francis 提交于 
      Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.

find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Stefan Weil <sw@weilnetz.de>

Conversions that aren't followed by exit() dropped, because they might
be inappropriate.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-14-armbru@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
      493d89bf
  11. 26 1月, 2018 1 次提交
    • T
      usb: Remove legacy -usbdevice options (host, serial, disk and net) · 99761176
      由 Thomas Huth 提交于 
      The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.

This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).

Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com

[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      99761176
  13. 25 1月, 2018 1 次提交
    • G
      sdl: reorganize -no-frame support · 04ff1a39
      由 Gerd Hoffmann 提交于 
      Drop no_frame flag from sdl_display_init argument list, use a global
variable instead.  This is temporary until -no-frame support is dropped
altogether when we remove sdl1 support.

Remove any traces of noframe from sdl2 code.  It is just dead code as
sdl2 doesn't support the SDL_NOFRAME window flag any more.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20180115154855.30850-3-kraxel@redhat.com
      04ff1a39
  15. 19 1月, 2018 1 次提交
    • I
      possible_cpus: add CPUArchId::type field · d342eb76
      由 Igor Mammedov 提交于 
      Remove dependency of possible_cpus on 1st CPU instance,
which decouples configuration data from CPU instances that
are created using that data.

Also later it would be used for enabling early cpu to numa node
configuration at runtime qmp_query_hotpluggable_cpus() should
provide a list of available cpu slots at early stage,
before machine_init() is called and the 1st cpu is created,
so that mgmt might be able to call it and use output to set
numa mapping.

Use MachineClass::possible_cpu_arch_ids() callback to set
cpu type info, along with the rest of possible cpu properties,
to let machine define which cpu type* will be used.

* for SPAPR it will be a spapr core type and for ARM/s390x/x86
  a respective descendant of CPUClass.

Move parse_numa_opts() in vl.c after cpu_model is parsed into
cpu_type so that possible_cpu_arch_ids() would know which
cpu_type to use during layout initialization.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
      d342eb76
  17. 16 1月, 2018 1 次提交
  19. 15 1月, 2018 1 次提交
  21. 22 12月, 2017 1 次提交
  23. 21 12月, 2017 1 次提交
  25. 18 12月, 2017 2 次提交
  27. 14 12月, 2017 1 次提交
  29. 16 11月, 2017 1 次提交
    • D
      NUMA: Enable adding NUMA node implicitly · 7b8be49d
      由 Dou Liyang 提交于 
      Linux and Windows need ACPI SRAT table to make memory hotplug work properly,
however currently QEMU doesn't create SRAT table if numa options aren't present
on CLI.

Which breaks both linux and windows guests in certain conditions:
 * Windows: won't enable memory hotplug without SRAT table at all
 * Linux: if QEMU is started with initial memory all below 4Gb and no SRAT table
   present, guest kernel will use nommu DMA ops, which breaks 32bit hw drivers
   when memory is hotplugged and guest tries to use it with that drivers.

Fix above issues by automatically creating a numa node when QEMU is started with
memory hotplug enabled but without '-numa' options on CLI.
(PS: auto-create numa node only for new machine types so not to break migration).

Which would provide SRAT table to guests without explicit -numa options on CLI
and would allow:
 * Windows: to enable memory hotplug
 * Linux: switch to SWIOTLB DMA ops, to bounce DMA transfers to 32bit allocated
   buffers that legacy drivers/hw can handle.

[Rewritten by Igor]
Reported-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Suggested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Takao Indoh <indou.takao@jp.fujitsu.com>
Cc: Izumi Taku <izumi.taku@jp.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
      7b8be49d
  31. 13 11月, 2017 1 次提交
  33. 25 10月, 2017 1 次提交
  35. 13 10月, 2017 1 次提交
  37. 10 10月, 2017 2 次提交
  39. 26 9月, 2017 2 次提交
    • G
      Add --firmwarepath to configure · 3d5eecab
      由 Gerd Hoffmann 提交于 
      Add a firmware path config option to configure.  Multiple directories
are accepted, with the usual colon as separator.  Default value is
${prefix}/share/qemu-firmware.  The path is searched in addition to the
current search path (typically ${prefix}/share/qemu).

This prepares qemu for the planned split of the prebuilt firmware blobs
into a separate project.

Distributions can also use this to get rid of the firmware symlink farm
and add -- for example -- /usr/share/seabios to the firmware path
instead.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-3-kraxel@redhat.com
      3d5eecab
    • G
      add qemu_add_data_dir() · 2a1cce90
      由 Gerd Hoffmann 提交于 
      Add helper function to add a directory to the qemu search path, so we
don't duplicate the checks.  Add a check for duplicate entries, so we
stop trying to open files twice.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20170914114236.25343-2-kraxel@redhat.com
      2a1cce90
  41. 22 9月, 2017 2 次提交
    • F
      vl: Don't include vde header · 27ad39ba
      由 Fam Zheng 提交于 
      Nothing in vl.c uses anything from the vde package, do remove the
unnecessary include.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20170907083552.17725-2-famz@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
      27ad39ba
    • P
      scsi, file-posix: add support for persistent reservation management · 7c9e5276
      由 Paolo Bonzini 提交于 
      It is a common requirement for virtual machine to send persistent
reservations, but this currently requires either running QEMU with
CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged
QEMU bypass Linux's filter on SG_IO commands.

As an alternative mechanism, the next patches will introduce a
privileged helper to run persistent reservation commands without
expanding QEMU's attack surface unnecessarily.

The helper is invoked through a "pr-manager" QOM object, to which
file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and
PERSISTENT RESERVE IN commands.  For example:

  $ qemu-system-x86_64
      -device virtio-scsi \
      -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
      -drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0
      -device scsi-block,drive=hd

or:

  $ qemu-system-x86_64
      -device virtio-scsi \
      -object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
      -blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0
      -device scsi-block,drive=hd

Multiple pr-manager implementations are conceivable and possible, though
only one is implemented right now.  For example, a pr-manager could:

- talk directly to the multipath daemon from a privileged QEMU
  (i.e. QEMU links to libmpathpersist); this makes reservation work
  properly with multipath, but still requires CAP_SYS_RAWIO

- use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though)

- more interestingly, implement reservations directly in QEMU
  through file system locks or a shared database (e.g. sqlite)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      7c9e5276
  43. 19 9月, 2017 2 次提交
    • I
      vl.c: convert cpu_model to cpu type and set of global properties before machine_init() · 6063d4c0
      由 Igor Mammedov 提交于 
      All machines that support user specified cpu_model either call
cpu_generic_init() or cpu_class_by_name()/CPUClass::parse_features
to parse feature string and to get CPU type to create.

Which leads to code duplication and hard-codding default CPU model
within machine_foo_init() code. Which makes it impossible to
get CPU type before machine_init() is run.

So instead of setting default CPUs models and doing parsing in
target specific machine_foo_init() in various ways, provide
a generic data driven cpu_model parsing before machine_init()
is called.

in follow up per target patches, it will allow to:
  * define default CPU type in consistent/generic manner
    per machine type and drop custom code that fallbacks
    to default if cpu_model is NULL
  * drop custom features parsing in targets and do it
    in centralized way.
  * for cases of
      cpu_generic_init(TYPE_BASE/DEFAULT_CPU, "some_cpu")
    replace it with
      cpu_create(machine->cpu_type) || cpu_create(TYPE_FOO)
    depending if CPU type is user settable or not.
    not doing useless parsing and clearly documenting where
    CPU model is user settable or fixed one.

Patch allows machine subclasses to define default CPU type
per machine class at class_init() time and if that is set
generic code will parse cpu_model into a MachineState::cpu_type
which will be used to create CPUs for that machine instance
and allows gradual per board conversion.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Message-Id: <1505318697-77161-4-git-send-email-imammedo@redhat.com>
Acked-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
      6063d4c0
    • E
      vl: Clean up user-creatable objects when exiting · 9d5139e5
      由 Eduardo Habkost 提交于 
      Delete all user-creatable objects in /objects when exiting QEMU, so they
can perform cleanup actions.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170824192315.5897-2-ehabkost@redhat.com>
Acked-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: NZack Cornelius <zack.cornelius@kove.net>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
      9d5139e5
  45. 15 9月, 2017 1 次提交