- 12 6月, 2015 12 次提交
-
-
由 Dr. David Alan Gilbert 提交于
check the return value of the function it calls and error if it's non-0 Fixup qemu_rdma_init_one_block that is the only current caller, and rdma_add_block the only function it calls using it. Pass the name of the ramblock to the function; helps in debugging. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Reviewed-by: NMichael R. Hines <mrhines@us.ibm.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
Split qemu_savevm_state_begin to: qemu_savevm_state_header That writes the initial file header. qemu_savevm_state_begin That sets up devices and does the first device pass. Used later in postcopy. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
and use it in loadvm_state and ram_load. Where ever it's used, check the return and error if it failed. Minor: ram_load was using a 257 byte array for its string, the maximum length is 255 bytes + 0 terminator, so fix to 256 Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This way, we will put savevm global state here, instead of lots of variables. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Juan Quintela 提交于
We assign the MIGRATION_STATUS_SETUP status in two places. Just in succession. Just remove the second one. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Padmanabh Ratnakar 提交于
Qemu crashes when IPv6 address is specified for migration and access to any RDMA uverbs device available on the system is blocked using cgroups. Fix the crash by checking the return value of ibv_open_device routine. Signed-off-by: NMeghana Cheripady <meghana.cheripady@avagotech.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 zhanghailiang 提交于
There are two places that define 'len' variable, It's OK for compiling, but makes it difficult for reading. Remove the local one which defined in the inside 'while' loop. Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
To make changes easier, with the copy, I maintained almost all include files. Now I remove the unnecessary ones on this patch. This compiles on linux x64 with all architectures configured, and cross-compiles for windows 32 and 64 bits. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Juan Quintela 提交于
If anyone feels like adding himself to the list, just sent me a patch. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Juan Quintela 提交于
Now, everything is in place. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Juan Quintela 提交于
For historic reasons, ram migration have been on arch_init.c. Just split it into migration/ram.c, the same that happened with block.c. There is only code movement, no changes altogether. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 11 6月, 2015 28 次提交
-
-
由 Peter Maydell 提交于
pc, acpi, virtio Most notably this includes virtio 1 patches Still not all devices converted, and not fully spec compliant, so disabled by default. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (42 commits) i386/acpi-build: fix PXB workarounds for unsupported BIOSes i386/acpi-build: more traditional _UID and _HID for PXB root buses vhost-scsi: move qdev properties into vhost-scsi.c virtio-9p-device: move qdev properties into virtio-9p-device.c virtio-serial-bus: move qdev properties into virtio-serial-bus.c virtio-rng: move qdev properties into virtio-rng.c virtio-scsi: move qdev properties into virtio-scsi.c virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES virtio-net: move qdev properties into virtio-net.c virtio-input: emulated devices [pci] virtio-input: core code & base class [pci] pci: add PCI_CLASS_INPUT_* virtio-pci: fill VirtIOPCIRegions early. virtio-pci: drop identical virtio_pci_cap virtio-pci: move cap type to VirtIOPCIRegion virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map virtio-pci: add virtio_pci_modern_region_map() virtio-pci: add virtio_pci_modern_regions_init() virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions virtio-balloon: switch to virtio_add_feature ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
sdl2: fix crash in handle_windowevent() when restoring the screen size # gpg: Signature made Thu Jun 11 08:57:38 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-sdl-20150611-1: sdl2: fix crash in handle_windowevent() when restoring the screen size Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Eric Auger 提交于
g_malloc0_n() is introduced since glib-2.24 while QEMU currently requires glib-2.22. This may cause a link error on some distributions. Signed-off-by: NEric Auger <eric.auger@linaro.org> Reviewed-by: NGonglei <arei.gonglei@huawei.com> Acked-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
spice: fix segfault in qemu_spice_create_update, ui_info tweaks. # gpg: Signature made Thu Jun 11 08:48:49 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/spice/tags/pull-spice-20150611-1: spice: ui_info tweaks spice-display: fix segfault in qemu_spice_create_update Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Laszlo Ersek 提交于
The patch apci: fix PXB behaviour if used with unsupported BIOS uses the following condition to see if a "PXB mem/IO chunk" has *not* been configured by the BIOS: (!range_base || range_base > range_limit) When this condition evaluates to true, said patch *omits* the corresponding entry from the _CRS. Later on the patch checks for the opposite condition (with the intent of *adding* entries to the _CRS if the "PXB mem/IO chunks" *have* been configured). Unfortunately, the condition was negated incorrectly: only the first ! operator was removed, which led to the nonsensical expression (range_base || range_base > range_limit) leading to bogus entries in the _CRS, and causing BSOD in Windows Server 2012 R2 when it runs on OVMF. The correct negative of the condition seen at the top is (range_base && range_base <= range_limit) Fix the expressions. Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Laszlo Ersek 提交于
The ACPI specification permits the _HID and _UID objects to evaluate to strings. (See "6.1.5 _HID (Hardware ID)" and "6.1.12 _UID (Unique ID)" in the ACPI v6.0 spec.) With regard to related standards, the UEFI specification can also express a device address composed from string _HID and _UID identifiers, inside the Expanded ACPI Device Path Node. (See "9.3.3 ACPI Device Path", Table 49, in the UEFI v2.5 spec.) However, numeric (integer) contents for both _HID and _UID are more traditional. They are recommended by the UEFI spec for size reasons: [...] the ACPI Device Path node is smaller and should be used if possible to reduce the size of device paths that may potentially be stored in nonvolatile storage [...] External tools support them better (for example the --acpi_hid and --acpi_uid options of "efibootmgr" only take numeric identifiers). Finally, numeric _HID and _UID contents are existing practice in the QEMU source. This patch was tested with a Fedora 20 LiveCD and a preexistent Windows Server 2012 R2 guest. Using "acpidump" and "iasl" in the Fedora guest, we get, in the SSDT: > Scope (\_SB) > { > Device (PC04) > { > Name (_UID, 0x04) // _UID: Unique ID > Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Peter Maydell 提交于
gtk: don't exit early in case gtk init fails # gpg: Signature made Thu Jun 11 10:38:29 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-gtk-20150611-1: gtk: don't exit early in case gtk init fails Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Gerd Hoffmann 提交于
Use the new dpy_ui_info_supported function. Clarifies the control flow. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Although it is pretty unusual the stride for the guest image and the mirror image maintained by spice-display can be different. So use separate variables for them. https://bugzilla.redhat.com/show_bug.cgi?id=1163047 Cc: qemu-stable@nongnu.org Reported-by: Nperrier vincent <clownix@clownix.net> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Peter Maydell 提交于
stdvga: factor out mmio subregion init virtio-gpu: add virtio gpu core code, 2d mode # gpg: Signature made Wed Jun 10 10:03:11 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150610-1: virtio-gpu/2d: add virtio gpu core code virtio: update headers, add virtio-gpu (2d) stdvga: factor out mmio subregion init stdvga: pass VGACommonState instead of PCIVGAState stdvga: fix offset in pci_vga_ioport_read Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Shannon Zhao 提交于
As only one place in vhost-scsi.c uses DEFINE_VHOST_SCSI_PROPERTIES, there is no need to expose it. Inline it into vhost-scsi.c to avoid wrongly use. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
As only one place in virtio-9p-device.c uses DEFINE_VIRTIO_9P_PROPERTIES, there is no need to expose it. Inline it into virtio-9p-device.c to avoid wrongly use. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
As only one place in virtio-serial-bus.c uses DEFINE_VIRTIO_SERIAL_PROPERTIES, there is no need to expose it. Inline it into virtio-serial-bus.c to avoid wrongly use. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
As only one place in virtio-rng.c uses DEFINE_VIRTIO_RNG_PROPERTIES, there is no need to expose it. Inline it into virtio-rng.c to avoid wrongly use. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
As only one place in virtio-scsi.c uses DEFINE_VIRTIO_SCSI_PROPERTIES and DEFINE_VIRTIO_SCSI_FEATURES, there is no need to expose them. Inline them into virtio-scsi.c to avoid wrongly use. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
Remove unsed DEFINE_VIRTIO_NET_PROPERTIES in virtio-net.h and delete a space typo. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Shannon Zhao 提交于
As only one place in virtio-net.c uses DEFINE_VIRTIO_NET_FEATURES, there is no need to expose it. Inline it into virtio-net.c to avoid wrongly use. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
This patch adds virtio-pci support for the emulated virtio-input devices. Using them is as simple as adding "-device virtio-tablet-pci" to your command line. If you want add multiple devices but don't want waste a pci slot for each you can compose a multifunction device this way: qemu -device virtio-keyboard-pci,addr=0d.0,multifunction=on \ -device virtio-tablet-pci,addr=0d.1,multifunction=on Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
This patch adds the virtio-pci support bits for virtio-input-device. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Initialize the modern bar and the VirtIOPCIRegion fields early, in realize. Also add a size field to VirtIOPCIRegion and variables for pci bars to VirtIOPCIProxy. This allows virtio-pci subclasses to change things before the device_plugged callback applies them. virtio-vga will use that to arrange regions in a way that virtio-vga is compatible to both stdvga (in vga mode) and virtio-gpu-pci (in pci mode). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Now the three struct virtio_pci_caps are identical, lets drop two of them ;) Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Also fill offset and length automatically, from VirtIOPCIRegion->offset and region size. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Add function to map modern virtio regions. Add offset to VirtIOPCIRegion. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
Add init function for the modern pci regions, move over the init code. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Gerd Hoffmann 提交于
For now just place the MemoryRegion there, following patches will add more. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-