Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-12-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-9-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-7-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-4-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-3-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-2-git-send-email-peter.maydell@linaro.org

Mostly bugfixes and small improvements; and the gdb target.xml
patch.

# gpg: Signature made Thu 28 Jan 2016 11:02:14 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20160128:
  s390x: s390_cpu_get_phys_page_debug has to return -1
  gdb: provide the name of the architecture in the target.xml
  s390x/css: fix control flags during csch
  watchdog/diag288: don't reset for action=none|debug|pause
  watchdog: introduction of get_watchdog_action
  s390x: fix generation of event information crw
  s390x/ioinst: set type and len for SEI response
  s390x/sclp: add device to the sysbus in sclp_realize
  s390x/machine: make addon register fields static
  s390x/skeys: Fix instance and class size
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1453831531-667-3-git-send-email-peter.maydell@linaro.org

Don't define TRUE and FALSE locally or manually include stdio.h;
instead use osdep.h which provides them.

This is a necessary prerequisite for moving to "everywhere includes
osdep.h", because otherwise there is a compile error due to the
redefinition of TRUE and FALSE.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1453831531-667-2-git-send-email-peter.maydell@linaro.org

If translation fails, we have to return -1. For now, we
would simply return the value last stored to raddr (if any).

This way, reading invalid memory via gdb will return values, although it
shouldn't.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch provides the name of the architecture in the target.xml
if available.

This allows the remote gdb to detect the target architecture on its
own - so there is no need to specify it manually (e.g. if gdb is
started without a binary) using "set arch *arch_name*".

The name of the architecture is provided by a callback that can
be implemented by all architectures. The arm implementation has
special handling for iwmmxt and returns arm otherwise. This can
be extended if necessary.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[rework to use a callback]
Message-Id: <1449144881-130935-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

From the beginning, css support contained an error in csch handling:
instead of setting the clear bit in the function control bits twice, we
need to set the clear pending bit in the activity control bits. Let's
fix this.

Cc: qemu-stable@nongnu.org
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHalil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

If the watchdog expires and the guest is not notified (NONE, DEBUG, PAUSE),
we must not reset the watchdog device, otherwise watchdog_ping() and
watchdog_stop() will fail when triggered by the guest. This reset behavior
matches to the z/VM behavior when a custom command is to be executed
on expiry.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NBo Tu <tubo@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Add get_watchdog_action(void) to allow access to the configured action.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NBo Tu <tubo@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Only one channel report word (crw) may be pending if there is
event-information pending.

This patch introduces a bool-type field 'sei_pending' for the
channel subsystem, which indicates whether there are pending events.
It is set when event information is made pending and the crw
generated, and cleared after the guest has collected all pending
event information. A crw is not generated if this flag had already
been set.
Signed-off-by: NSong Shan Gong <gongss@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

If no event information is pending, the return code
is set to 0x0005 and the length of the response is
set to 8 bytes.
Signed-off-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NSong Shan Gong <gongss@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The init of a device should have no side effects. Therefore move
registering of the event facility into the realize function, so
multiple instances of the SCLP device can be created e.g. for
introspection.

Add some more detail as to why we have to add it to the sysbus
at all.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

No need to have them as global symbol.
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

fix a typo that messes up instance and class size.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Xen 2016/01/26 with Signed-off-by lines.

# gpg: Signature made Tue 26 Jan 2016 17:20:12 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"

* remotes/sstabellini/tags/xen-20160126-2:
  xen: make it possible to build without the Xen PV domain builder
  xen: domainbuild: reopen libxenctrl interface after forking for domain watcher.
  xen: Use stable library interfaces when they are available.
  xen: Switch uses of xc_map_foreign_{pages,bulk} to use libxenforeignmemory API.
  xen: Switch uses of xc_map_foreign_range into xc_map_foreign_pages
  xen: Switch to libxengnttab interface for compat shims.
  xen: Switch to libxenevtchn interface for compat shims.
  xen_console: correctly cleanup primary console on teardown.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Until the previous patch this relied on xc_fd(), which was only
implemented for Xen 4.0 and earlier.

Given this wasn't working since Xen 4.0 I have marked this as disabled
by default.

Removing this support drops the use of a bunch of symbols from
libxenctrl, specifically:

  - xc_domain_create
  - xc_domain_destroy
  - xc_domain_getinfo
  - xc_domain_max_vcpus
  - xc_domain_setmaxmem
  - xc_domain_unpause
  - xc_evtchn_alloc_unbound
  - xc_linux_build

This is another step towards only using Xen libraries which provide a
stable inteface.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Using an existing libxenctrl handle after a fork was never
particularly safe (especially if foreign mappings existed at the time
of the fork) and the xc fd has been unavailable for many releases.

Reopen the handle after fork and therefore do away with xc_fd().
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.

Specifically libxenevtchn, libxengnttab and libxenforeignmemory.

Previous patches have already laid the groundwork for using these by
switching the existing compatibility shims to reflect the intefaces to
these libraries.

So all which remains is to update configure to detect the libraries
and enable their use. Although they are notionally independent we take
an all or nothing approach to the three libraries since they were
added at the same time.

The only non-obvious bit is that we now open a proper xenforeignmemory
handle for xen_fmem instead of reusing the xen_xc handle.

Build tested with 4.0 .. 4.6 (inclusive) and the patches targetting
4.7 which adds these libraries.

This uses CONFIG_XEN_CTRL_INTERFACE_VERSION == 471 to cover the
introduction of these new interfaces.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.

One such library will be libxenforeignmemory which provides access to
privileged foreign mappings and which will provide an interface
equivalent to xc_map_foreign_{pages,bulk}.

The new xenforeignmemory_map() function behaves like
xc_map_foreign_pages() when the err argument is NULL and like
xc_map_foreign_bulk() when err is non-NULL, which maps into the shim
here onto checking err == NULL and calling the appropriate old
function.

Note that xenforeignmemory_map() takes the number of pages before the
arrays themselves, in order to support potentially future use of
variable-length-arrays in the prototype (in the future, when Xen's
baseline toolchain requirements are new enough to ensure VLAs are
supported).

In preparation for adding support for libxenforeignmemory add support
to the <=4.0 and <=4.6 compat code in xen_common.h to allow us to
switch to using the new API. These shims will disappear for versions
of Xen which include libxenforeignmemory.

Since libxenforeignmemory will have its own handle type but for <= 4.6
the functionality is provided by using a libxenctrl handle we
introduce a new global xen_fmem alongside the existing xen_xc. In fact
we make xen_fmem a pointer to the existing xen_xc, which then works
correctly with both <=4.0 (xc handle is an int) and <=4.6 (xc handle
is a pointer). In the latter case xen_fmem is actually a double
indirect pointer, but it all falls out in the wash.

Unlike libxenctrl libxenforeignmemory has an explicit unmap function,
rather than just specifying that munmap should be used, so the unmap
paths are updated to use xenforeignmemory_unmap, which is a shim for
munmap on these versions of xen. The mappings in xen-hvm.c do not
appear to be unmapped (which makes sense for a qemu-dm process)

In fb_disconnect this results in a change from simply mmap over the
existing mapping (with an implicit munmap) to expliclty unmapping with
xenforeignmemory_unmap and then mapping the required anonymous memory
in the same hole. I don't think this is a problem since any other
thread which was racily touching this region would already be running
the risk of hitting the mapping halfway through the call. If this is
thought to be a problem then we could consider adding an extra API to
the libxenforeignmemory interface to replace a foreign mapping with
anonymous shared memory, but I'd prefer not to.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.

One such library will be libxenforeignmemory which provides access to
privileged foreign mappings and which will provide an interface
equivalent to xc_map_foreign_{pages,bulk}.

In preparation for this switch all uses of xc_map_foreign_range to
xc_map_foreign_pages. This is trivial because size was always
XC_PAGE_SIZE so the necessary adjustments are trivial:

  * Pass &mfn (an array of length 1) instead of mfn. The function
    takes a pointer to const, so there is no possibily of mfn changing
    due to this change.
  * Pass nr_pages=1 instead of size=XC_PAGE_SIZE

There is one wrinkle in xen_console.c:con_initialise() where
con->ring_ref is an int but can in some code paths (when !xendev->dev)
be treated as an mfn. I think this is an existing latent truncation
hazard on platforms where xen_pfn_t is 64-bit and int is 32-bit (e.g.
amd64, both arm* variants). I'm unsure under what circumstances
xendev->dev can be NULL or if anything elsewhere ensures the value
fits into an int. For now I just use a temporary xen_pfn_t to in
effect upcast the pointer from int* to xen_pfn_t*.

In xenfb.c:common_bind we now explicitly launder the mfn into a
xen_pfn_t, so it has the correct type to be passed to
xc_map_foreign_pages and doesn't provoke warnings on 32-bit x86.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.

One such library will be libxengnttab which provides access to grant
tables.

In preparation for this switch the compatibility layer in xen_common.h
(which support building with older versions of Xen) to use what will
be the new library API. This means that the gnttab shim will disappear
for versions of Xen which include libxengnttab.

To simplify things for the <= 4.0.0 support we wrap the int fd in a
malloc(sizeof int) such that the handle is always a pointer. This
leads to less typedef headaches and the need for
XC_HANDLER_INITIAL_VALUE etc for these interfaces.

Note that this patch does not add any support for actually using
libxengnttab, it just adjusts the existing shims.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

In Xen 4.7 we are refactoring parts libxenctrl into a number of
separate libraries which will provide backward and forward API and ABI
compatiblity.

One such library will be libxenevtchn which provides access to event
channels.

In preparation for this switch the compatibility layer in xen_common.h
(which support building with older versions of Xen) to use what will
be the new library API. This means that the evtchn shim will disappear
for versions of Xen which include libxenevtchn.

To simplify things for the <= 4.0.0 support we wrap the int fd in a
malloc(sizeof int) such that the handle is always a pointer. This
leads to less typedef headaches and the need for
XC_HANDLER_INITIAL_VALUE etc for these interfaces.

Note that this patch does not add any support for actually using
libxenevtchn, it just adjusts the existing shims.

Note that xc_evtchn_alloc_unbound functionality remains in libxenctrl,
since that functionality is not exposed by /dev/xen/evtchn.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

All of the work in con_disconnect applies to the primary console case
(when xendev->dev is NULL). Therefore remove the early check and bail
and allow it to fall through. All of the existing code is correctly
conditional already.

The ->dev and ->gnttabdev handles are either both set or neither. For
consistency with con_initialise() with to the former here too.

With this con_initialise and con_disconnect now mirror each other.

Fix up a hard tab in the function while editing.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

* chardev support for TLS and leak fix
* NBD fix from Denis
* condvar fix from Dave
* kvm_stat and dump-guest-memory almost rewrite
* mem-prealloc fix from Luiz
* manpage style improvement

# gpg: Signature made Tue 26 Jan 2016 14:58:18 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (49 commits)
  scripts/dump-guest-memory.py: Fix module docstring
  scripts/dump-guest-memory.py: Introduce multi-arch support
  scripts/dump-guest-memory.py: Cleanup functions
  scripts/dump-guest-memory.py: Improve python 3 compatibility
  scripts/dump-guest-memory.py: Make methods functions
  scripts/dump-guest-memory.py: Move constants to the top
  nbd: add missed aio_context_acquire in nbd_export_new
  memory: exit when hugepage allocation fails if mem-prealloc
  cpus: use broadcast on qemu_pause_cond
  scripts/kvm/kvm_stat: Add optparse description
  scripts/kvm/kvm_stat: Add interactive filtering
  scripts/kvm/kvm_stat: Fixup filtering
  scripts/kvm/kvm_stat: Fix rlimit for unprivileged users
  scripts/kvm/kvm_stat: Read event values as u64
  scripts/kvm/kvm_stat: Cleanup and pre-init perf_event_attr
  scripts/kvm/kvm_stat: Fix output formatting
  scripts/kvm/kvm_stat: Make tui function a class
  scripts/kvm/kvm_stat: Remove unneeded X86_EXIT_REASONS
  scripts/kvm/kvm_stat: Group arch specific data
  scripts/kvm/kvm_stat: Cleanup of Event class
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The module docstring is changed into a multi-line comment to comply
with pep 257.

The comment about the docstring that gets used by gdb to print the
help is moved to the location of the docstring.
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1453464520-3882-7-git-send-email-frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

By modelling the ELF with ctypes we not only gain full python 3
support but can also create dumps for different architectures more easily.
Tested-by: NAndrew Jones <drjones@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1453464520-3882-6-git-send-email-frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Increase readability by adding newlines and comments, as well as
removing wrong whitespaces and C style braces around conditionals and
loops.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1453464520-3882-5-git-send-email-frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This commit does not make the script python 3 compatible, it is a
preparation that fixes the easy and common incompatibilities.

Print is a function in python 3 and therefore needs braces around its
arguments.

Range does not cast a gdb.Value object to int in python 3, we have to
do it ourselves.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1453464520-3882-4-git-send-email-frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The functions dealing with qemu components rarely used parts of the
class, so they were moved out of the class.

As the uintptr_t variable is needed both within and outside the class,
it was made a constant and moved to the top.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1453464520-3882-3-git-send-email-frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The constants bloated the class definition and were therefore moved to
the top.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1453464520-3882-2-git-send-email-frankja@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>