Now, we compile all the tests with the values passed through the command
line.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Fold its values into LDFLAGS and CFLAGS
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Hi all,
currently vga always resizes the screen when vga_hw_invalidate is called
while this is not required and all the other graphic emulators don't.
This patch fixes it, making vga invalidate behaviour consistent with the
other emulated devices.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Hi all,
this patch fixes the sdl window resize event handler so that it doesn't
require the emulated graphic card (or console.c) to call
qemu_console_resize.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This patch introduces dynamic timer intervals: we slow down the refresh
rate when there in no much activity but we get back to a fast refresh
rate when the activity resume.

Please note that qemu_timer_expired is not an inline function any more
because I needed to call it from vnc.c however I don't think this change
should have any serious consequence.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This patch removes the server surface from VncState and adds a single
server surface to VncDisplay for all the possible clients connected.
Each client maintains a different dirty bitmap in VncState.
The guest surface is moved to VncDisplay as well because we don't need
to track guest updates in more than one place.

This patch has been updated to handle CopyRect correctly and efficiently.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This patch removes the timer per vnc client connected and adds a single
timer to update all the possible clients.
We call vga_hw_update only once in the timer handler.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

The printf command takes an octal value after \, so we have to convert
our decimal representation to octal first and then write it.

This unbreaks extboot signing. Multiboot wasn't affected yet because
the checksum was < 8.

Spotted and first patch by Glauber Costa <glommer@redhat.com>.
Printf idea by Paolo Bonzini <bonzini@gnu.org>.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: Glauber Costa <glommer@redhat.com>
CC: Paolo Bonzini <bonzini@gnu.org>
CC: Jan Ondrej <ondrejj@salstar.sk>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This is a new block driver written from scratch
to support the VDI format in QEMU.

VDI is the native format used by Innotek / SUN VirtualBox.

Latest changes:

* stripped down version
  (code for synchronous operations and experimental code removed)

* don't open VDI snapshot images (with uuid_link or uuid_parent)

* modified vdi_aio_cancel
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

The old code resulted in wrong escape sequences:

#define CONFIG_QEMU_SHAREDIR "c:\Program Files\Qemu"

gcc warnings:

vl.c:5708:20: warning: unknown escape sequence '\P'
vl.c:5708:20: warning: unknown escape sequence '\Q'

Windows can handle slash (/) path separators,
and QEMU already adds directories using slash,
so there is no need to fight with the correct number
of backslashes.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Pretty simple and straigt forward.
IRQs modeled simliar to sysbus.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

First user of the new drive property.  With this patch applied host
and guest config can be specified separately, like this:

  -drive if=none,id=disk1,file=/path/to/disk.img
  -device virtio-blk-pci,drive=disk1

You can set any property for virtio-blk-pci now.  You can set the pci
address via addr=.  You can switch the device into 0.10 compat mode
using class=0x0180.  As this is per device you can have one 0.10 and one
0.11 virtio block device in a single virtual machine.

Old syntax continues to work.  Internally it does the same as the two
lines above though.  One side effect this has is a different
initialization order, which might result in a different pci address
being assigned by default.

Long term plan here is to have this working for all block devices, i.e.
once all scsi is properly qdev-ified you will be able to do something
like this:

  -drive if=none,id=sda,file=/path/to/disk.img
  -device lsi,id=lsi,addr=<pciaddr>
  -device scsi-disk,drive=sda,bus=lsi.0,lun=<n>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Adds a (host) drive property, intended to be used by virtual disk
backend drivers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This adds a host drive, but doesn't implicitly add a guest drive for it.
First step in splitting host and guest configuration, check the
following patches to see how this can be used ...
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Make -device switch use the QemuOpts framework.
Everything should continue to work like it did before.

New: "-set device.$id.$property=$value" works.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

One use case will be file for drives (no filename quoting issues), i.e.

	-drive id=test,if=virtio
	-set drive.test.file=/vmdisk/test-virtio.img

It will work for any other option (assuming handled by QemuOpts) though.
Except for id= for obvious reasons ;).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Move drive option description there.
Rename it, give it a qemu_ prefix.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

We can't use get_param_value(), it can't handle parameters without
'=' in there.  Examples not working because of that:

  -device foo,id=bar
  -device file=/path/image,format=qcow2,snapshot,id=disk0
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

qemu_opt_foreach: loop over all QemuOpts entries.
qemu_opts_id: return QemuOpts id.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

this patch fixes an issue in symfind.

Assume you have the following symbols:

Address  Size
0045bca0 00000080 T s0
0045bd20 00000112 T s1

You'll notice that s1 is s0 + size.

So the current symfind will find that address 0045bd20 belongs to s0
instead of s1.

Laurent
Signed-off-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Attached patch lets configure find xen headers and libs
with --extra-cflags and --extra-ldlfags option.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Use qemu_tolower() instead of tolower().
Fixes warning on NetBSD.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>