- 03 12月, 2013 19 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
The code is similar to the implementation of discard and write_zeroes with UNMAP. However, failure must be propagated up to block.c. The stale page cache problem can be reproduced as follows: # modprobe scsi-debug lbpws=1 lbprz=1 # ./qemu-io /dev/sdXX qemu-io> write -P 0xcc 0 2M qemu-io> write -z 0 1M qemu-io> read -P 0x00 0 512 Pattern verification failed at offset 0, 512 bytes qemu-io> read -v 0 512 00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ ... # ./qemu-io --cache=none /dev/sdXX qemu-io> write -P 0xcc 0 2M qemu-io> write -z 0 1M qemu-io> read -P 0x00 0 512 qemu-io> read -v 0 512 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ... And similarly with discard instead of "write -z". Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
See the next commit for the description of the Linux kernel problem that is worked around in raw_open_common. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Writing zeroes to a file can be done by punching a hole if MAY_UNMAP is set. Note that in this case ENOTSUP is not ignored, but makes the block layer fall back to the generic implementation. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
The current check is right for MAY_UNMAP=1. For MAY_UNMAP=0, just try and fall back to regular writes as soon as a WRITE SAME command fails. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
added myself to reflect recent work on the iscsi block driver. Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Lieven 提交于
since commit 3ac21627 the default value changed to 0. Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This will let misaligned but large requests use zero clusters. This is important because the cluster size is not guest visible. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Right now, bdrv_co_do_write_zeroes will only try to align the beginning of the request. However, it is simpler for many formats to expect the block layer to separate both the head *and* the tail. This makes sure that the format's bdrv_co_write_zeroes function will be called with aligned sector_num and nb_sectors for the bulk of the request. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Similar to write_zeroes, let the generic code receive a ENOTSUP for discard operations. Since bdrv_discard has advisory semantics, we can just swallow the error. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This will be used by the SCSI layer. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
This lets bdrv_co_do_rw receive flags, so that it can be used for zero writes. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Paolo Bonzini 提交于
bdrv_co_discard is only covering drivers which have a .bdrv_co_discard() implementation, but not those with .bdrv_aio_discard(). Not very nice, and easy to avoid. Suggested-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
The buffer for description file was 4096 which only covers a few hundred of extents. This changes the buffer to dynamic allocated with g_strdup_printf in order to support bigger cases. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Marc-André Lureau 提交于
The AioContext ctx field is apparently unused in qemu codebase since 02ffb504. Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Marc-André Lureau 提交于
qemu_co_queue_wait_insert_head() is unused in qemu code base now. Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 30 11月, 2013 5 次提交
-
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
This removes "qemu-io> " prompt from qemu-io output in _filter_qemu_io, and updates all the output files with the following command: cd tests/qemu-iotests && sed -i "s/qemu-io> //g" *.out Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
If you open an image temporarily just because you want to check its size or get it flushed, there's no real reason to open the whole backing file chain. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NBenoit Canet <benoit@irqsave.net>
-
- 29 11月, 2013 15 次提交
-
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
In the case of snapshot=on, don't rely on the backing file path in the temporary image any more, but override the backing file with the given set of options. This way, block drivers that don't use a file name can be accessed with snapshot=on, for example: -drive file.driver=nbd,file.host=localhost,snapshot=on Which becomes internally something like: file.filename=/tmp/vl.AWQZCu,backing.file.driver=nbd,backing.file.host=localhost Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Pause the drive and start the block job, so we won't miss the block job. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
They wrap blkdebug "break" and "remove_break". Add optional argument "resume" to cancel_and_wait(). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
This adds "remove_break" command which is the reverse of blkdebug command "break": it removes all breakpoints with given tag and resumes all the requests. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
iotests.py already has one. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Liu Yuan 提交于
Sheepdog support two kinds of redundancy, full replication and erasure coding. # create a fully replicated vdi with x copies -o redundancy=x (1 <= x <= SD_MAX_COPIES) # create a erasure coded vdi with x data strips and y parity strips -o redundancy=x:y (x must be one of {2,4,8,16} and 1 <= y < SD_EC_MAX_STRIP) E.g, to convert a vdi into sheepdog vdi 'test' with 8:3 erasure coding scheme $ qemu-img convert -o redundancy=8:3 linux-0.2.img sheepdog:test Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NLiu Yuan <namei.unix@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Liu Yuan 提交于
We can actually use BDRVSheepdogState *s to pass most of the parameters. Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NLiu Yuan <namei.unix@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
Nested QDicts used to be both entered recursively in order to move their entries to the target QDict and also be moved themselves to the target QDict like all other objects. This is harmless because for the top level, qdict_do_flatten() will encounter the (now empty) QDict for a second time and then delete it, but at the same time it's obviously unnecessary overhead. Just delete nested QDicts directly after moving all of their entries. Reported-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
Reported-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Liu Yuan 提交于
This will help people find mailing list relevant to sheepdog. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: NLiu Yuan <namei.unix@gmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Charlie Shepherd 提交于
cow_co_is_allocated() only checks one sector's worth of allocated bits before returning. This is allowed but (slightly) inefficient, so extend it to check all of the file's metadata sectors. Signed-off-by: NCharlie Shepherd <charlie@ctshepherd.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> [kwolf: silenced compiler warning (-Wmaybe-uninitialized for changed)] Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Charlie Shepherd 提交于
Process a whole sector's worth of COW bits by reading a sector, setting the bits after skipping any already set bits, then writing it out again. Make sure we only flush once before writing metadata, and only if we need to write metadata. Signed-off-by: NCharlie Shepherd <charlie@ctshepherd.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Fam Zheng 提交于
We have multiple dirty bitmaps in BDS now, switch QAPI to allow query it (BlockInfo.dirty_bitmaps), and also drop old BlockInfo.dirty. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Previously a BlockDriverState has only one dirty bitmap, so only one caller (e.g. a block job) can keep track of writing. This changes the dirty bitmap to a list and creates a BdrvDirtyBitmap for each caller, the lifecycle is managed with these new functions: bdrv_create_dirty_bitmap bdrv_release_dirty_bitmap Where BdrvDirtyBitmap is a linked list wrapper structure of HBitmap. In place of bdrv_set_dirty_tracking, a BdrvDirtyBitmap pointer argument is added to these functions, since each caller has its own dirty bitmap: bdrv_get_dirty bdrv_dirty_iter_init bdrv_get_dirty_count bdrv_set_dirty and bdrv_reset_dirty prototypes are unchanged but will internally walk the list of all dirty bitmaps and set them one by one. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 28 11月, 2013 1 次提交
-
-
由 Max Reitz 提交于
If a block device is unbacked, a streaming blockjob should immediately finish instead of beginning to try to stream, then noticing the backing file does not contain even the first sector (since it does not exist) and then finishing normally. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-