This does the first part of the conversion to coroutines, by
wrapping bdrv_write implementations to take the mutex.

Drivers that implement bdrv_write rather than bdrv_co_writev can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This does the first part of the conversion to coroutines, by
wrapping bdrv_read implementations to take the mutex.

Drivers that implement bdrv_read rather than bdrv_co_readv can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.

raw-win32 does not need the lock, because it cannot yield.
nbd also doesn't probably, but better be safe.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The big conversion of bdrv_read/write to coroutines caused the two
homonymous callbacks in BlockDriver to become reentrant.  It goes
like this:

1) bdrv_read is now called in a coroutine, and calls bdrv_read or
bdrv_pread.

2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry;

3) in the common case when the protocol is file, bdrv_co_do_readv calls
bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields
until the AIO operation is complete;

4) if bdrv_read had been called from a bottom half, the main loop
is free to iterate again: a device model or another bottom half
can then come and call bdrv_read again.

This applies to all four of read/write/flush/discard.  It would also
apply to is_allocated, but it is not used from within coroutines:
besides qemu-img.c and qemu-io.c, which operate synchronously, the
only user is the monitor.  Copy-on-read will introduce a use in the
block layer, and will require converting it.

The solution is "simply" to convert all drivers to coroutines!  We
just need to add a CoMutex that is taken around affected operations.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Move vmdk_parent_open to vmdk_open.  There's another path how
vmdk_parent_open can be reached:

  vmdk_parse_extents() ->  vmdk_open_sparse() ->  vmdk_open_vmdk4() ->
  vmdk_open_desc_file().

If that can happen, however, the code is bogus.  vmdk_parent_open
reads from bs->file:

    if (bdrv_pread(bs->file, s->desc_offset, desc, DESC_SIZE) != DESC_SIZE) {

but it is always called with s->desc_offset == 0 and with the same
bs->file.  So the data that vmdk_parent_open reads comes always from the
same place, and anyway there is only one place where it can write it,
namely bs->backing_file.

So, if it cannot happen, the patched code is okay.

It is also possible that the recursive call can happen, but only once.  In
that case there would still be a bug in vmdk_open_desc_file setting
s->desc_offset = 0, but the patched code is okay.

Finally, in the case where multiple recursive calls can happen the code
would need to be rewritten anyway.  It is likely that this would anyway
involve adding several parameters to vmdk_parent_open, and calling it from
vmdk_open_vmdk4.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

While vmdk_open_desc_file (touched by the patch) correctly changed -1
to -EINVAL, vmdk_open did not.  Fix it directly in vmdk_parent_open.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 63ffb564 broke floppy devices specified on the command line like
-drive file=...,if=none,id=floppy -global isa-fdc.driveA=floppy because it
relies on drive_get() which works only with -fda/-drive if=floppy.

This patch resembles what we're already doing for IDE, i.e. remember the floppy
device that was created and use that to extract the BlockDriverStates where
needed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

If during allocation of compressed clusters the cluster was already allocated
uncompressed, fail and properly release the l2_table (the latter avoids a
failed assertion).

While at it, make it return some real error numbers instead of -1.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>

Only qcow and qcow2 can do compression at all, and they require unallocated
clusters when writing the compressed data.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

The floppy device was broken by commit 212ec7ba (fdc: Convert to
isa_register_portio_list). While the old interface provided the port number
relative to the floppy drive's io_base, the new one provides the real port
number, so we need to apply a bitmask now to get the register number.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush().  Remove
the redundant .bdrv_flush() implementations.

[Paolo Bonzini: change raw driver to bdrv_co_flush]
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add coroutine support for flush and apply the same emulation that
we already do for read/write.  bdrv_aio_flush is simplified to always
go through a coroutine.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The synchronous .bdrv_flush callback doesn't exist any more and a device really
shouldn't poke into the block layer internals anyway. All drivers are supposed
to have a correctly working bdrv_flush, so let's just hard-code this.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Haven't released memory of 'ctx' before return.
Signed-off-by: NAlex Jia <ajia@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This makes the following patch easier to review.

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

irq_target array saving/loading is in the wrong loop.
Version bump.
Signed-off-by: NDmitry Koshelev <karaghiozis@gmail.com>
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

The OMAP2430 version of the omap-gpio device has five GPIO modules,
not four like the other OMAP2 versions; wire up the fifth module's
IRQ line correctly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Commit c572f23a added trace events
with mismatching format string and arguments.

gcc reports these errors:

In file included from trace.c:2:0:
trace.h: In function ‘trace_v9fs_attach’:
trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_wstat’:
trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir’:
trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir_return’:
trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args]

Fix the format strings and also use %u instead of %d for unsigned values
in the changed strings. There are more minor errors of this kind
which I did not fix because that would make the review more difficult.

v2: Fixed position of } for v9fs_mkdir_return.

Cc: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Conflicts:
	trace-events

Files are almost identical in functionality, just remove the
differences that make no sense.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

unix and tcp outgoing migration have error values, but didn't returned
it.  Make them return the error.  Notice that EINPROGRESS & EWOULDBLOCK
are not considered errors as call will be retry later.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

This will allow us to hide the state values.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

Now that current_migration always exist, there is no reason for
max_throotle variable.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>

This means we can remove the two forward declarations.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

It is used only in one place
Signed-off-by: NJuan Quintela <quintela@redhat.com>

It is only used inside migration.c, and fields on that struct are
accessed all around the place on that file.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We called it from a single place, and always with state !=
MIG_STATE_ACTIVE.  Just remove the whole callback.  For users of the
notifier, notice that this is exactly the case where they don't care,
we are just freeing the state from previous failed migration (it can't
be a sucessful one, otherwise we would not be running on that machine
in the first place).
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

This function is a bit different of the others that change the state,
in the sense that if migrate_fd_cleanup() returns an error, it set the
status to error, not completed.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

Use MIG_STATE_ACTIVE only when migration has really started.  Use this
new state to setup migration parameters.  Change defines for an
anonymous struct.
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Once there, remove all parameters that don't need to be passed to
*start_outgoing_migration() functions
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>

I have to move two functions postions to avoid forward declarations
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>