Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190416185301.25344-2-david@redhat.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

Kconfig settings for the Arm machines

# gpg: Signature made Mon 13 May 2019 09:19:43 BST
# gpg:                using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2019-05-13: (29 commits)
  hw/arm: Remove hard-enablement of the remaining PCI devices
  hw/arm: Express dependencies of the musca machines with Kconfig
  hw/arm: Express dependencies of the xlnx-versal-virt machine with Kconfig
  hw/arm: Express dependencies of the ZynqMP zcu102 machine with Kconfig
  hw/arm: Express dependencies of the microbit / nrf51 machine with Kconfig
  hw/arm: Express dependencies of the remaining IMX boards with Kconfig
  hw/arm: Express dependencies of the MSF2 / EMCRAFT_SF2 machine with Kconfig
  hw/arm: Express dependencies of sabrelite with Kconfig
  hw/arm: Express dependencies of canon-a1100 with Kconfig
  hw/arm: Express dependencies of the raspi machines with Kconfig
  hw/arm: Express dependencies of the MPS2 boards with Kconfig
  hw/arm: Express dependencies of allwinner / cubieboard with Kconfig
  hw/arm: Express dependencies of netduino / stm32f2xx with Kconfig
  hw/arm: Express dependencies of the virt machine with Kconfig
  hw/arm: Express dependencies of the aspeed boards with Kconfig
  hw/arm: Express dependencies of collie with Kconfig
  hw/arm: Express dependencies of xilinx-zynq with Kconfig
  hw/arm: Express dependencies of the PXA2xx machines with Kconfig
  hw/arm: Express dependencies of realview, versatile and vexpress with Kconfig
  hw/arm: Express dependencies of stellaris with Kconfig
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Miscellaneous patches for 2019-05-13

# gpg: Signature made Mon 13 May 2019 08:04:02 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-05-13:
  Clean up decorations and whitespace around header guards
  Normalize header guard symbol definition.
  Clean up ill-advised or unusual header guards
  Clean up header guards that don't match their file name
  target/xtensa: Clean up core-isa.h header guards
  linux-user/nios2 linux-user/riscv: Clean up header guards
  authz: Normalize #include "authz/trace.h" to "trace.h"
  Use #include "..." for our own headers, <...> for others
  Clean up includes
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

input: add vhost-user-input, virtio-input fixes.

# gpg: Signature made Mon 13 May 2019 07:52:39 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/input-20190513-v2-pull-request:
  virtio-input: fix Kconfig dependency and Makefile
  virtio-input-host-pci: cleanup types
  util: simplify unix_listen()
  Add vhost-user-input-pci
  Add vhost-user-backend
  libvhost-user: add PROTOCOL_F_CONFIG if {set, get}_config
  libvhost-user: fix -Waddress-of-packed-member
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Demacrofy the SoftMMU

  - the demacro itself
  - refactor TLB_RECHECK and fix bug
  - move unaligned handler out

# gpg: Signature made Fri 10 May 2019 20:34:14 BST
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-demacro-softmmu-100519-1:
  cputlb: Do unaligned store recursion to outermost function
  cputlb: Do unaligned load recursion to outermost function
  cputlb: Drop attribute flatten
  cputlb: Move TLB_RECHECK handling into load/store_helper
  accel/tcg: demacro cputlb
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The PCI devices should be pulled in by default if PCI_DEVICES
is set, so there is no need anymore to enforce them in the configs
file.
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Dependencies have been determined with trial-and-error and by
looking at the musca.c source file.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Dependencies have been determined with trial-and-error and by
looking at the xlnx-versal.c source file.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

This cleans up most settings in default-configs/aarch64-softmmu.mak.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the NRF51 / microbit machine.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

IMX25, IMX7 and IMX6UL were still missing the Kconfig dependencies.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the emcraft-sf2 machine - we also
distinguish between the machine (CONFIG_EMCRAFT_SF2) and the SoC
(CONFIG_MSF2) now.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the Sabrelite / iMX6 machine.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the DIGIC / canon-a1100 machine.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Most of the code is directly controlled by the CONFIG_RASPI switch,
so not much to add here additionally.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the mps2-an* machines.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add dependencies for the Cubitech Cubieboard.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Netduino only depends on the stm32f205 SoC which in turn depends on
its components.
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Dependencies have been determined by looking at hw/arm/virt.c
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Dependencies have been determined by looking at hw/arm/aspeed.c
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the Strongarm collie machine.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the xilinx-zynq-a9 board.
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the PXA2xx machines (akita, borzoi,
connex and verdex gumstix, tosa, mainstone, spitz, terrier and z2).
This patch is based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the OMAP machines (cheetah, n800, n810,
sx1 and sx1-v1).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the fsl-imx31 / kzm machine.
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPeter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the highbank machine (and the midway
machine).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Add Kconfig dependencies for the Exynos-related boards (nuri and
smdkc210).
This patch is slightly based on earlier work by Ákos Kovács (i.e.
his "hw/arm/Kconfig: Add ARM Kconfig" patch).
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Some of our machines (like the ARM cubieboard) use CONFIG_AHCI for an AHCI
sysbus device, but do not use CONFIG_PCI since they do not feature a PCI
bus. With CONFIG_AHCI but without CONFIG_PCI, currently linking fails:

    ../hw/ide/ich.o: In function `pci_ich9_ahci_realize':
    hw/ide/ich.c:124: undefined reference to `pci_allocate_irq'
    hw/ide/ich.c:126: undefined reference to `pci_register_bar'
    hw/ide/ich.c:128: undefined reference to `pci_register_bar'
    hw/ide/ich.c:131: undefined reference to `pci_add_capability'
    hw/ide/ich.c:147: undefined reference to `msi_init'
    ../hw/ide/ich.o: In function `pci_ich9_uninit':
    hw/ide/ich.c:158: undefined reference to `msi_uninit'
    ../hw/ide/ich.o:(.data.rel+0x50): undefined reference to `vmstate_pci_device'

We must only compile ich.c if CONFIG_PCI is available, too, so introduce a
new config switch for this device.
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

The Makefile tries to include device Kconfig dependencies via

 -include $(SUBDIR_DEVICES_MAK_DEP)

and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Some machines have an AHCI adapter, but no PCI. To be able to
compile hw/ide/ahci.c without CONFIG_PCI, we still need the two
functions msi_enabled() and msi_notify() for linking.
This is required for the new Kconfig-like build system, if a user
wants to compile a QEMU binary with just one machine that has AHCI,
but no PCI, like the ARM "cubieboard" for example.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>

Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-9-armbru@redhat.com>

We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.

Done with scripts/clean-header-guards.pl.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-8-armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Leading underscores are ill-advised because such identifiers are
reserved.  Trailing underscores are merely ugly.  Strip both.

Our header guards commonly end in _H.  Normalize the exceptions.

Done with scripts/clean-header-guards.pl.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]

Header guard symbols should match their file name to make guard
collisions less likely.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]

scripts/clean-header-guards.pl warns these headers use reserved
identifier _XTENSA_CORE_CONFIGURATION_H as header guard symbol.  It
additionally warns the guard doesn't match the file name.

Reuse of the same guard symbol in multiple headers is okay as long as
they cannot be included together.

Since we can avoid guard symbol reuse easily, do so: use the guard
symbol scripts/clean-header-guards.pl picks, less the TARGET_ prefix.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-5-armbru@redhat.com>

Reuse of the same guard symbol in multiple headers is okay as long as
they cannot be included together.  scripts/clean-header-guards.pl
can't tell, so it warns.

Since we can avoid guard symbol reuse easily, do so: use guard symbol
${target^^}_${fname^^} for linux-user/$target/$fname, just like we did
in commit a9c94277..35003856.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-4-armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>