[v2: handle building in a separate dir]
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch makes make quiet again.

There is already a similar patch from Juan Quintela,
but maybe this shorter form is preferred.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.

Patchworks-ID: 35511
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

This suite contains tests to assure that QList API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qlist

Patchworks-ID: 35333
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QList is a high-level data type that can be used to store QObjects
in a singly-linked list.

The following functions are available:

- qlist_new()    Create a new QList
- qlist_append() Append a QObject to the list
- qlist_iter()   Iterate over stored QObjects

Patchworks-ID: 35334
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35221
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35220
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35219
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35218
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35217
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35216
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35213
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35214
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35211
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35215
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35212
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35209
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35210
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35208
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patchworks-ID: 35207
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Generate config-devices.h for each target and config-all-devices.h for
common library.  We don't want to name both config-devices.h to avoid
path problems

Patchworks-ID: 35195
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.

Patchworks-ID: 35196
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add config.h file that includes config-target.h and config-host.h

Patchworks-ID: 35193
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If config-host.mak dont' exist, we have exited in the check at
the beginning of the file.
Once here, move the bits to the else part of the test at the beginning of
the file.

Patchworks-ID: 35191
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use timestamp based appreach to avoid not needed recompilation.
Add it to rules.mak

Many thanks to Paolo Bonzini for helpding the design, and the debug.

Patchworks-ID: 35190
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Just say it to make
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See also facd2857 and
34005a00.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Build uset targers as true PIE if user want to keep qemu
self-virtualizable.

v5:
  - Split into to patches: drop link hack and add PIE support
  - do not build PIE by default and drop toolchain check

v4:
  - Add test for toolchain if it has proper PIE support

v3:
  - One more pice of the hack was removed
  - Description updated

v2:
  - Add configure options do enable/disable PIE for usermode targets.
    Disabling can be useful if you build uswing toolchain which has
    broken PIE support. PIE for usermode targets enabled by default.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* Add SCSIBus.
 * Add SCSIDeviceInfo, move device callbacks here.
 * add qdev/scsi helper functions.
 * convert drivers.

Adding scsi disks via -device works now, i.e. you can do:

 -drive id=sda,if=none,...
 -device lsi
 -device scsi-disk,drive=sda

legacy command lines (-drive if=scsi,...) continue to work.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Add USBBus.
 * Add USBDeviceInfo, move device callbacks here.
 * Add usb-qdev helper functions.
 * Switch drivers to qdev.

TODO:
 * make the rest of qemu aware of usb busses and kill the FIXMEs
   added by this patch.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QDict API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qdict
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This suite contains tests to assure that QString API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qstring
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>