- 12 12月, 2008 13 次提交
-
-
由 aurel32 提交于
... also remove two warnings. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5989 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5988 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Use the defines added by the previous patch in the virtio drivers. Also remove the pointless vendor and device args from the virtio_blk_init() function. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5987 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This sets a default PCI subsystem ID for all emulated PCI devices. PCI specs require this, so do it. In many cases it is enougth to know the PCI ID to handle a device correctly. Sometimes a device driver must identify the exact piece of hardware (via PCI Subsystem ID) though. What does this patch to qemu devices: Right now the emulated PCI devices have no PCI subsystem ID, only the PCI ID. The discussed patch sets a default PCI subsystem ID for all emulated devices. Which will make the qemu devices look pretty much like in the laptop case: all PCI subsystem IDs will point to qemu by default. If a driver emulates a very specific piece of hardware where it has to emulate more than just the PCI chip, it can overwrite the PCI subsystem ID without problems. The es1370 driver does that for example. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5986 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
When creating a snapshot with multiple qcow2 disks attached, the current behaviour is that qemu creates a disk snapshot on all of them and chooses one to write the VM state to. Despite having the state only in one image, loadvm tries to restore the VM state from the middle of nowhere if you run qemu a second time with only one of the other images attached. In the lucky case it will fail because there simply is no state, but it also can happen that it loads the state of a different snapshot (the one this new one is based upon). The fix is to write a zero VM state size to the images which don't contain the state, and check this in loadvm. I agree that you probably have to provoke such things intentionally to get in a state like this with qemu itself. However, with my second patch that adds snapshot support to qemu-img it could become a reasonable use case to have snapshots with and without VM states on the same image. Signed-off-by: NKevin Wolf <kwolf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5985 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Fix crash with kvm enabled. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5984 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
since _BSD if already handled in osdep.c:qemu_memalign(), we don't need to check it in the calling function again. getpagesize() is available in BSD. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5983 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
Fix compiler warning on OSX, reported by Andreas Faerber. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5982 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5981 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
I'm cross-compiling, and linux/auxvec.h was not installed with my glibc headers. How about this: Don't require linux/auxvec.h, which isn't always installed with libc. Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5980 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5979 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
fw_cfg_add_callback() checks if key has FW_CFG_WRITE_CHANNEL bit set after masking the key with FW_CFG_ENTRY_MASK. But as FW_CFG_ENTRY_MASK is ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL), the bit is never set and function exits. This patch corrects this by checking the bit before masking the value. Signed-by-off: Laurent Vivier <Laurent.Vivier@bull.net> Acked-by: NGleb Natapov <gleb@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5978 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5977 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 11 12月, 2008 7 次提交
-
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5976 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
Caught by -Wstrict-prototypes git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5975 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5974 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 malc 提交于
Thanks to Segher Boessenkool and Holis Blanchard. AIX and Darwin cache inquiry: http://gcc.gnu.org/ml/gcc-patches/2007-08/msg00388.html Auxiliary vectors: http://manugarg.googlepages.com/aboutelfauxiliaryvectors git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5973 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NJustin Chevrier <theburner1@yahoo.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5972 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
This patch adds SH bit handling to sh4's TLB, which is a part of MMU functionality that had not been implemented in qemu. Additionally, increment_urc() call in cpu_load_tlb() is deleted, because the specification explicitly says that URC is not incremented by an LDTLB instruction (at Section 3 of SH7751 Hardware manual(REJ09B0370-0400)). Even though URC is not needed to be strictly same as HW because it is a random number, this condition is not negligible. Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5971 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Based on a patch from Vladimir Prus <vladimir@codesourcery.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5970 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 10 12月, 2008 10 次提交
-
-
由 aliguori 提交于
This patch adds support for 64-bit Block Move instructions. There are multiple modes for 64-bit Block moves, direct, indirect, and table indirect. This patch implements Direct and Table indirect moves which are needed by 64-bit windows and SYM_CONF_DMA_ADDRESSING_MODE=2 for the Linux sym53c8xx_2 driver respectively. Two helper functions are included to check which mode the guest is using. For 64-bit direct moves, we fetch a 3rd DWORD and store the value in the DBMS register. For Table Indirect moves, we look into the table for which register contains the upper 32-bits of the 64-bit address. This selector value indicates which register to pull the value from and into dnad64 register. Finally, lsi_do_dma is updated to use the approriate register to build a 64-bit DMA address if required. With this patch, Windows XP x64, 2003 SP2 x64, can now install to scsi devices. Linux SYM_CONF_DMA_ADDRESSING_MODE=2 need a quirk fixup in Patch 4 to function properly. Signed-off-by: NRyan Harper <ryanh@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5969 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Register name should be: Dynamic Block Move Selector (dbms) according to page 215 of the LSI 53C895A Technical Manual[1]. 1. http://www.lsi.com/DistributionSystem/AssetDocument/files/docs/techdocs/storage_stand_prod/SCSIControllers/lsi53c895a_tech_manual.pdfSigned-off-by: NRyan Harper <ryanh@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5968 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This allows easier use of the change vnc password monitor command from management scripts, without having to implement expect(1)-like behaviour. Signed-off-by: NChris Webb <chris@arachsys.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5967 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
monitor_readline expects buf_size to include the terminating \0, but do_change_vnc in monitor.c calls it as though it doesn't. The other site where monitor_readline reads a password (in vl.c) passes the buffer length correctly. Signed-off-by: NChris Webb <chris@arachsys.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5966 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5965 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Mask the initial MSR with the mask from the PowerPC CPU definition. Noticed by Nathan Froyd. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5964 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
When running grub-install (32-bit) on an x86_64 Linux system in qemu, it hangs on a pagefault forever, because an integer overflow occurs on the IP on "jmp im". This patch masks overflows for 32 bit IPs on a 64 bit system, just like it is done for 16 bit IPs already. Using this patch, x86_64 openSUSE installation works again. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NKevin Wolf <kwolf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5963 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Current implementation of memory-mapped i8042 controller is atm implemented with an interface shift (it_shift) parameter, like most all memory-mapped devices in Qemu. However, this isn't suitable for MIPS Magnum, where i8042 controller is at 0x80005000 up to 0x80005fff. Thomas Bogendoerfer (from #mipslinux) tested the behaviour of a real machine, and found that odd addresses are for status/command register, and even addresses for data register. Attached patch implements this behaviour by replacing the it_shift parameter by a mask one. Incidentally, keyboard now works on OpenBSD 2.3, which accesses i8042 controller at 0x80005060 and 0x80005061. Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5962 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
MMIO exits are more expensive in KVM or Xen than in QEMU because they involve, at least, privilege transitions. However, MMIO write operations can be effectively batched if those writes do not have side effects. Good examples of this include VGA pixel operations when in a planar mode. As it turns out, we can get a nice boost in other areas too. Laurent mentioned a 9.7% performance boost in iperf with the coalesced MMIO changes for the e1000 when he originally posted this work for KVM. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Prior to kvm-80, memory slot deletion was broken in the KVM kernel modules. In kvm-81, a new capability is introduced to signify that this problem has been fixed. Since we rely on being able to delete memory slots, refuse to work with any kernel module that does not have this capability present. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5960 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 09 12月, 2008 10 次提交
-
-
由 aurel32 提交于
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5959 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5958 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Paul's comment on my first approach to fix the h2g usage in page_find_alloc finally open my eyes about what the code is actually supposed to do: With the help of h2g_valid we can no cleanly check if a freshly allocate page (for host usage) is guest-reachable and, in case it is, mark it reserved in the guest's address range. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5957 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Introduce h2g_valid to check if a given host address can be converted into a valid guest address. Based on a patch from Jan Kiszka <jan.kiszka@web.de> Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5956 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
h2g can only work on 64-bit hosts if the provided address is mappable to the guest range. Neglecting this was already the source for several bugs. Instrument the macro so that it will trigger earlier in the future (at least as long as we have this kind of mapping mechanism). Based on a patch from Jan Kiszka <jan.kiszka@web.de> Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5955 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5954 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Remove some ugly outputs with colorgcc Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5953 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5952 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5951 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5950 c046a42c-6fe2-441c-8c8c-71466251a162
-