This is somewhat functional.  With this, and linux driver from my tree,
I was able to use virtio net as virtio 1.0 device for light browsing.

At the moment, dataplane and vhost code is
still missing.

Based on Cornelia's virtio 1.0 patchset:
    Date: Thu, 11 Dec 2014 14:25:02 +0100
    From: Cornelia Huck <cornelia.huck@de.ibm.com>
    To: virtualization@lists.linux-foundation.org, qemu-devel@nongnu.org
    Cc: rusty@rustcorp.com.au, thuth@linux.vnet.ibm.com, mst@redhat.com,
    Cornelia Huck <cornelia.huck@de.ibm.com>
    Subject: [PATCH RFC v6 00/20] qemu: towards virtio-1 host support
    Message-Id: <1418304322-7546-1-git-send-email-cornelia.huck@de.ibm.com>

which is itself still missing some core bits.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Easier than duplicating code.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Make sure that all vhost interfaces use 64 bit features, as the virtio
core does, and make sure to use ULL everywhere possible to be on the
safe side.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Add VERSION_1 to list of features that we should
test at the backend.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

virtio-net (non-vhost) now should have everything in place to support
virtio 1.0: let's enable the feature bit for it.

Note that VIRTIO_F_VERSION_1 is technically a transport feature; once
every device is ready for virtio 1.0, we can move setting this
feature bit out of the individual devices.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

virtio-1 devices always use num_buffers in the header, even if
mergeable rx buffers have not been negotiated.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Devices operating as virtio 1.0 may not allow writes to the mac
address in config space.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

virtio-1 allow setting of the FEATURES_OK status bit to fail if
the negotiated feature bits are inconsistent: let's fail
virtio_set_status() in that case and update virtio-ccw to post an
error to the guest.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

For virtio-1 devices, the driver must not attempt to set feature bits
after it set FEATURES_OK in the device status. Simply reject it in
that case.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Handle endianness conversion for virtio-1 virtqueues correctly.

Note that dataplane now needs to be built per-target.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

For virtio-1 devices, we allow a more complex queue layout that doesn't
require descriptor table and rings on a physically-contigous memory area:
add virtio_queue_set_rings() to allow transports to set this up.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

Add code that checks for the VERSION_1 feature bit in order to make
decisions about the device's endianness. This allows us to support
transitional devices.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

We allocate an dummy log even if the size is zero. So we should put it
unconditionally too.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently we allocate one vhost log per vhost device. This is sub
optimal when:

- Guest has several device with vhost as backend
- Guest has multiqueue devices

In the above cases, we can avoid the memory allocation by sharing a
single vhost log among all the vhost devices. This is done through:

- Introducing a new vhost_log structure with refcnt inside.
- Using a global pointer to vhost_log structure that will be used. And
  introduce helper to get the log with expected log size and helper to
- drop the refcnt to the old log.
- Each vhost device still keep track of a pointer to the log that was
  used.

With above, if no resize happens, all vhost device will share a single
vhost log. During resize, a new vhost_log structure will be allocated
and made for the global pointer. And each vhost devices will drop the
refcnt to the old log.

Tested by doing scp during migration for a 2 queues virtio-net-pci.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This PIIX4 init function has no more reason to receive a pointer to the
FwCfg object. Remove the parameter from the prototype, and update callers.

As a result, the pc_init1() function no longer needs to save the return
value of pc_memory_init() and xen_load_linux(), which makes it more
similar to pc_q35_init().

The return type & value of pc_memory_init() and xen_load_linux() are not
changed themselves; maybe we'll need their return values sometime later.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>

The acpi_pm1_cnt_init() core function is responsible for setting up the
register block that will ultimately react to S3 and S4 requests (see
acpi_pm1_cnt_write()). It makes sense to advertise this configuration to
the guest firmware via an easy to parse fw_cfg file (ACPI is too complex
for firmware to parse), and indeed PIIX4 does that. However, since
acpi_pm1_cnt_init() is not specific to PIIX4, neither should be the fw_cfg
file.

This patch makes "etc/system-states" appear on all chipsets modified in
the previous patch, not just PIIX4 (assuming they have fw_cfg at all).

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>

This patch only modifies the function prototype and updates all chipset
code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and
disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled".

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>

Drop superfluous pc-dimm alignment on hot-pluggable mem
range size assert, since it causes QEMU crash during hotplug
when hotplugging pc-dimm with alignment bigger than
an alignment of hot-pluggable mem range size.

Instead allow pc_dimm_get_free_addr() find free address
and bail out gracefully later in that function during
checking if pc-dimm will fit in hot-pluggable mem range.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PXB does not work with unsupported bioses, but should
not interfere with normal OS operation.
We don't ship them anymore, but it's reasonable
to keep the work-around until we update the bios in qemu.

Fix this by not adding PXB mem/IO chunks to _CRS
if they weren't configured by BIOS.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The pxb can be attach to and existing numa node by specifying
numa_node option that equals the desired numa nodeid.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PCI root buses can be attached to a specific NUMA node.
PCI buses are not attached by default to a NUMA node.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The bios does not index the pxb slot number when
it computes the IRQ because it resides on bus 0
and not on the current bus.
However Qemu routes the irq through bus 0 and adds
the pxb slot to the IRQ computation of the PXB device.

Synchronize between bios and Qemu by canceling
pxb's effect.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The bios looks for 'etc/extra-pci-roots' to decide if
is going to scan further buses after bus 0 tree.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PXB is a "light-weight" host bridge whose purpose is to enable
the main host bridge to support multiple PCI root buses
for pc machines.

As oposed to PCI-2-PCI bridge's secondary bus, PXB's bus
is a primary bus and can be associated with a NUMA node
(different from the main host bridge) allowing the guest OS
to recognize the proximity of a pass-through device to
other resources as RAM and CPUs.

The PXB is composed from:
 - A primary PCI bus (can be associated with a NUMA node)
   Acts like a normal pci bus and from the functionality point
   of view is an "expansion" of the bus behind the
   main host bridge.
 - A pci-2-pci bridge behind the primary PCI bus where the actual
   devices will be attached.
 - A host-bridge PCI device
   Situated on the bus behind the main host bridge, allows
   the BIOS to configure the bus number and IO/mem resources.
   It does not have its own config/data register for configuration
   cycles, this being handled by the main host bridge.
-  A host-bridge sysbus to comply with QEMU current design.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Use the newer pci_bus_num to correctly get the root bus number.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

If multiple root buses are used, root bus 0 cannot use all the
pci holes ranges. Remove the IO/mem ranges used by the other
primary buses.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Save the IO/mem/bus numbers ranges assigned to the extra root busses
to be removed from the root bus 0 range.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

If the machine has extra root busses that are snooping to
the i440fx host bridge, we need to add them to
acpi in order to be properly detected by guests.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

PXB buses are assumed to be children of bus 0. Look for them
while scanning the buses.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE anymore.
On i386 arch we only have two pci hosts, so we can look only for them.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.

Removed the assumption that the root bus does not
have a parent device because is specific only
to the default class implementation.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Commit 68e6b0af (acpi: add aml_while() term) added
the definition of aml_while without the actual implementation.
Implement the term.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Add a new API named acpi_send_gpe_event() to send hotplug SCI.
This API can be used by pci, cpu and memory hotplug.

This patch is rebased on master.
Signed-off-by: NZhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Commit "019a3edb virtio: make features 64bit wide" missed a few changes,
as I've noticed while trying to rebase the virtio-1 branch to latest
master.  This patch adds them.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Failure was included on commit
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We should validate the vq index against nvqs_with_notifiers. Otherwise we may
try to mask or unmask vector for vqs without notifiers (e.g control vq). This
will lead qemu abort on kvm_irqchip_commit_routes() when trying to boot win8.1
guest.

Fixes 851c2a75 ("virtio-pci: speedup MSI-X
masking and unmasking")
Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

In DSDT FDC0 declares the IO region as IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04).
Use the same in lpc_ich9 initialization code.
Now the floppy drive is detected correctly on Windows.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>