Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
切换分支/标签
  1. 22 1月, 2015 1 次提交
    • G
      monitor: add query-vnc-servers command · df887684
      由 Gerd Hoffmann 提交于 
      Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc-servers".  Changes over query-vnc:

 * It returns a list of vnc servers, so multiple vnc server instances
   are covered.
 * Each vnc server returns a list of server sockets.  Followup patch
   will use that to also report websockets.  In case we add support for
   multiple server sockets server sockets (to better support ipv4+ipv6
   dualstack) we can add them to the list too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      df887684
  3. 13 1月, 2015 2 次提交
  5. 10 12月, 2014 1 次提交
  7. 26 11月, 2014 1 次提交
  9. 13 11月, 2014 2 次提交
    • A
      QMP/input-send-event: make console parameter optional · 51fc4476
      由 Amos Kong 提交于 
      The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.

Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.

I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.

If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.

For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.

Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.

So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      51fc4476
    • A
      QMP/input-send-event: update document of union InputEvent · 935fb915
      由 Amos Kong 提交于 
      Signed-off-by: NAmos Kong <akong@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
      935fb915
  11. 15 10月, 2014 1 次提交
    • G
      qmp: Print descriptions of object properties · 07d09c58
      由 Gonglei 提交于 
      Add a new "description" field to DevicePropertyInfo.
The descriptions can serve as documentation in the code,
and they can be used to provide better help. For example:

$./qemu-system-x86_64 -device virtio-blk-pci,?

Before this patch:

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool
virtio-blk-pci.scsi=bool
virtio-blk-pci.config-wce=bool
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16
virtio-blk-pci.logical_block_size=uint16
virtio-blk-pci.drive=str
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=on/off
virtio-blk-pci.multifunction=on/off
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=pci-devfn
virtio-blk-pci.event_idx=on/off
virtio-blk-pci.indirect_desc=on/off
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=on/off
virtio-blk-pci.class=uint32

After:

virtio-blk-pci.iothread=link<iothread>
virtio-blk-pci.x-data-plane=bool (on/off)
virtio-blk-pci.scsi=bool (on/off)
virtio-blk-pci.config-wce=bool (on/off)
virtio-blk-pci.serial=str
virtio-blk-pci.secs=uint32
virtio-blk-pci.heads=uint32
virtio-blk-pci.cyls=uint32
virtio-blk-pci.discard_granularity=uint32
virtio-blk-pci.bootindex=int32
virtio-blk-pci.opt_io_size=uint32
virtio-blk-pci.min_io_size=uint16
virtio-blk-pci.physical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.logical_block_size=uint16 (A power of two between 512 and 32768)
virtio-blk-pci.drive=str (ID of a drive to use as a backend)
virtio-blk-pci.virtio-backend=child<virtio-blk-device>
virtio-blk-pci.command_serr_enable=bool (on/off)
virtio-blk-pci.multifunction=bool (on/off)
virtio-blk-pci.rombar=uint32
virtio-blk-pci.romfile=str
virtio-blk-pci.addr=int32 (Slot and optional function number, example: 06.0 or 06)
virtio-blk-pci.event_idx=bool (on/off)
virtio-blk-pci.indirect_desc=bool (on/off)
virtio-blk-pci.vectors=uint32
virtio-blk-pci.ioeventfd=bool (on/off)
virtio-blk-pci.class=uint32

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
      07d09c58
  13. 04 10月, 2014 1 次提交
  15. 02 10月, 2014 1 次提交
  17. 26 9月, 2014 1 次提交
  19. 25 8月, 2014 1 次提交
    • A
      cpus: Define callback for QEMU "nmi" command · 9cb805fd
      由 Alexey Kardashevskiy 提交于 
      This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.

This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.

This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.

This changes inject-nmi command description for HMP and QMP.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      9cb805fd
  21. 06 8月, 2014 1 次提交
    • P
      backends: Introduce chr-testdev · 5692399f
      由 Paolo Bonzini 提交于 
      From: Paolo Bonzini <pbonzini@redhat.com>

chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.

Currently there is a single command implemented, "q".  It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.

It can be used as:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtserialport,chardev=ctd -chardev testdev,id=ctd

or, use:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtconsole,chardev=ctd -chardev testdev,id=ctd

to bind it to virtio-serial port0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      5692399f
  23. 29 6月, 2014 1 次提交
  25. 27 6月, 2014 4 次提交
  27. 23 6月, 2014 6 次提交
  29. 19 6月, 2014 8 次提交
  31. 16 6月, 2014 1 次提交
  33. 06 6月, 2014 4 次提交
  35. 21 5月, 2014 1 次提交
  37. 19 5月, 2014 1 次提交
    • P
      block: optimize zero writes with bdrv_write_zeroes · 465bee1d
      由 Peter Lieven 提交于 
      this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      465bee1d
  39. 06 5月, 2014 1 次提交