- 07 11月, 2013 11 次提交
-
-
由 Jeff Cody 提交于
This tests the replay of a data sector in a VHDX image file. The image file is a 10G dynamic image, with 4MB block size. The image was created with qemu-img, and the log left unplayed by modification of the vhdx image format driver. It was verified under both QEMU and Hyper-V that the image file, post log replay, matched. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
This removes the IMGFMT_GENERIC blocker for read-only, so existing iotests run read/write tests for vhdx images created by qemu-img (e.g. tests 001, 002, 003). In addition, this updates the sample image test for the Hyper-V created image, to verify we can write it as well. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
The non-global option output is suppresed in _make_test_img() for output verification in the 0?? tests. This adds suppression for the vhdx-unique options as well. This allows check -vhdx to run successfully. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
When creating images with backing files in the test, the backing file argument was not quoted properly. This caused the test to fail when run from a pathname with a space. Pass the backing argument in with the -b option to _make_test_img, so it can be properly quoted. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
There were still a couple of instances of unquoted usage of $TEST_IMG and $TEST_IMG.orig. Quoted these so they will not fail on pathnames with spaces in them. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
There were still instances of $TEST_IMG not being properly quoted. This was in the usage of a string built up for a 'for' loop; modify the loop so we can quote $TEST_IMG properly. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
$TEST_IMG.base is used unquoted. Add quotes so that pathnames with spaces are supported. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
_make_test_img() currently works with spaced pathnames only when not specifying a backing file. This fixes it so that the backing file argument is properly quoted. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Jeff Cody 提交于
The usage of $TEST_IMG was not properly quoted everywhere in common.pattern. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Max Reitz 提交于
The actual size of the image file may differ depending on the Linux kernel currently running on the host. Filtering out this value makes this test pass in such cases. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NBenoit Canet <benoit@irqsave.net> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 31 10月, 2013 1 次提交
-
-
由 Fam Zheng 提交于
Implement .bdrv_get_specific_info to return the extent information. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 30 10月, 2013 4 次提交
-
-
由 Fam Zheng 提交于
Case 030 occasionally fails because of block job compltes too fast to be captured by script, and 'unexpected qmp event' of job completion causes the test failure. Simply fill in some data to the test image to make this false alarm less likely to happen. (For other benefits to prefill data to test image, see also commit ab68cdfa). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Add a test case for trying to open an image file where it is impossible to open its backing file (in this case, because it was deleted). When doing this, qemu (or qemu-io in this case) should not crash but rather print an appropriate error message. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
There's a same common function in iotests.py Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Commit 684b2544 forgot to update it. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 25 10月, 2013 1 次提交
-
-
由 Max Reitz 提交于
Add a test for saving a VM state from a qcow2 image and loading it back (with having restarted qemu in between); this should work without any problems. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 11 10月, 2013 11 次提交
-
-
由 Max Reitz 提交于
Extend 060 by a test which creates a corrupted image with an active L2 entry pointing to an inactive L2 table and writes to the corresponding guest offset. Also, use overlap-check=all for all tests in 060. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Block devices creates with -drive and drive_add should automatically disappear if the guest device is unplugged. blockdev-add ones shouldn't. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
IF_NONE allows read-only, which makes forbidding it in this place for other types pretty much pointless. Instead, make sure that all devices for which the check would have errored out check in their init function that they don't get a read-only BlockDriverState. This catches even cases where IF_NONE and -device is used. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Fam Zheng 提交于
This is a header flag and we needs sparse for the header. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Convert "fprintf(stderr,..." and standardize error messages: Remove a few local_error's and use errp. Remove "VMDK:" or "Vmdk:" prefixes in error message and fix to upper case. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Make use of the error parameter in the opening and creating functions in block/raw-posix.c. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Move the blank line to above the test step banner, so it looks clearer in blocks. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
This adds the VHDX format to the qemu-iotests format, and adds a read test. The test reads from an existing sample image, that was created with Hyper-V under Windwos Server 2012. The image file is a 1GB dynamic image, with 32MB blocks. The pattern 0xa5 exists from 0MB-33MB (past a block size boundary) The pattern 0x96 exists from 33MB-66MB (past another block boundary, and leaving a partial blank block) From 66MB-1024MB, all reads should return 0. Although 1GB dynamic image with 66MB of data, the bzip2'ed image file size is only 874 bytes. This also adds in the IMGFMT_GENERIC flag, so r/o images can be tested (e.g. ./check -vhdx) without failing tests that assume r/w support. Signed-off-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Add a new test case for discarding preallocated zero clusters; doing this should not result in any leaks. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Add a test for the additional information now provided by qemu-img info when used on qcow2 images. It also tests the qemu QMP output from the query-block command when running qemu with different runtime options than specified in the image (ImageInfoSpecific should always refer to the image). Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
In _img_info, filter out additional information specific to the image format provided by qemu-img info, since tests designed for multiple image formats would produce different outputs for every image format otherwise. In a human-readable dump, that new information will always be last for each "image information block" (multiple blocks are emitted when inspecting the backing file chain). Every block is separated by an empty line. Therefore, in this case, everything starting with the line "Format specific information:" up to that empty line (or EOF, if it is the last block) has to be stripped. The JSON dump will always emit pretty JSON data. Therefore, the opening and closing braces of every object will be on lines which are indented by exactly the same amount, and all lines in between will have more indentation. Thus, in this case, everything starting with a line matching the regular expression /^ *"format-specific": {/ until /^ *},?/ has to be stripped, where the number of spaces at the beginning of the respective lines is equal. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 07 10月, 2013 1 次提交
-
-
由 Max Reitz 提交于
Because l2_allocate now frees the unused L2 cluster on error, the according test cases in 026 don't result in one leaked cluster anymore. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 01 10月, 2013 1 次提交
-
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: Wenchao Xia<xiawenc@linux.vnet.ibm.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 27 9月, 2013 3 次提交
-
-
由 Max Reitz 提交于
Add a test case for zero cluster expansion on an image completely filled with preallocated zero clusters to test 061. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
A lot of image filename and paths are used unquoted. Quote these to make sure that directories / filenames with spaces are not problematic. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jeff Cody 提交于
For image formats that are not "QEMU native", but supported for compatibility, it is useful to verify that an image created with the 'gold standard' native tool can be read / written to successfully by QEMU. In addition to testing non-native images, this could also be useful to test against image files created by older versions of QEMU. This provides a directory to store small sample images, for use by scripts in tests/qemu-iotests. Image files should be compressed with bzip2. To use a sample image from a bash script, the _use_sample_img function will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to be the decompressed sample image copy. To cleanup, call _cleanup_test_img as normal. Signed-off-by: NJeff Cody <jcody@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 26 9月, 2013 1 次提交
-
-
由 Fam Zheng 提交于
QMP/qmp.py is renamed to scripts/qmp/qmp.py, fix the search path in iotests.py. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 25 9月, 2013 4 次提交
-
-
由 Fam Zheng 提交于
Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Since commit "block: Error parameter for open functions", error output is more verbose. Update test case output file to follow the change. Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
Test 052 uses qemu-io -s which will result in bdrv_open trying to create a temporary snapshot file in /tmp. However, since O_DIRECT and tmpfs do not work well together, disable this test for -nocache. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Test that backing.file.filename option can be parsed and override the backing file from image (backing file reflected with "info block"). Signed-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 13 9月, 2013 1 次提交
-
-
由 Max Reitz 提交于
Test 038 uses asynchronous I/O, resulting (potentially) in a different output for every run (regarding the order of the I/O accesses). This can be fixed by simply sorting the I/O access messages, since their order is irrelevant anyway (for this asynchonous I/O). Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 12 9月, 2013 1 次提交
-
-
由 Bharata B Rao 提交于
qemu-iotests number 007 doesn't do test image cleanup. This will affect those protocols that expect a clean state before every test. Hence ensure that test image is cleaned up in this test. Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-