All snapshot related code, except bdrv_snapshot_dump() and
bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump()
will be moved to another file later. bdrv_is_snapshot() is not related
with internal snapshot. It also fixes small code style errors reported
by check script.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bs_snapshots global variable points to the BlockDriverState which
will be used to save vmstate.  This is really a savevm.c concept but was
moved into block.c:bdrv_snapshots() when it became clear that hotplug
could result in a dangling pointer.

While auditing the block layer's global state I came upon bs_snapshots
and realized that a variable is not necessary here.  Simply find the
first BlockDriverState capable of internal snapshots each time this is
needed.

The behavior of bdrv_snapshots() is preserved across hotplug because new
drives are always appended to the bdrv_states list.  This means that
calling the new find_vmstate_bs() function is idempotent - it returns
the same BlockDriverState unless it was hot-unplugged.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Both 030 and 041 use create_image().  Move it to iotests.py.

Also drop ImageStreamingTestCase since the class now has no methods.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The iotests.compare_images() function returns True if two image files
have the identical data.  Previously this was implemented by converting
images to raw and then comparing their contents using Python.  Since
"qemu-img compare" is now available and is more efficient, switch to it.

This function will be reused by the 'drive-backup' test case.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The cancel_and_wait() function has been duplicated in 030 and 041.  Move
it into iotests.py and let it return the event so tests can perform
additional asserts.

Note that 041's cancel_and_wait(wait_ready=True) is replaced by
wait_ready_and_cancel(), which uses the new wait_ready() and
cancel_and_wait() underneath.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Tests 030 and 041 both use query-block-jobs to check whether any block
jobs are active.  Make this code common so that 'drive-backup' and other
new feature tests will be able to reuse it.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.

Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.

E.g. To include vmdk readonly, and others read+write:
    ./configure --target-list=x86_64-softmmu \
                --block-drv-rw-whitelist=qcow2,raw,file,qed \
                --block-drv-ro-whitelist=vmdk
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit f3f4d2c0 added a hint to increase
the cluster size when a large image cannot be created.  Test 054 now has
outdated output and fails because the golden output does not match.

This patch updates the 054 golden output.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's not a GObject.

Cc: Gerd Hoffman <kraxel@redhat.com>
Reported-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
 - Fix summary to agree with code (Peter)

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Luiz Capitulino reported that guest refused to boot and qemu
complained with:
kvm_set_phys_mem: error unregistering overlapping slot: Invalid argument

It is caused by commit 235e8982 that did double free for the memslot
so that the second one raises the -EINVAL error

Fix it by reset memory size only if it is needed
Reported-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the user specifies a target list themselves, check each entry
to make sure it's a target we recognise. This allows us to print
a helpful error message, rather than falling through (where we
would probably eventually end up hitting the uninformative
"ERROR: Unsupported target CPU").
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1369062976-301-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Autogenerate the default target list based on what files exist
in default-configs; this allows us to remove one of the places
that has to be kept up to date with a complete list of every
target we support.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1369062976-301-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Peter Crosthwaite (20) and others
# Via Peter Maydell
* pmaydell/arm-devs.next: (24 commits)
  i.MX: Improve EPIT timer code.
  exynos4210.c: register rom_mem for memory migration
  hw/arm/exynos4210.c: convert chipid_and_omr to an mmio region
  i.MX: split GPT and EPIT timer implementation
  sd/sd.c: Fix "inquiry" ACMD41
  sd/sdhci:ADMA: fix interrupt
  sd/sdhci.c: Fix bdata_read DPRINT message
  sd/sdhci: Fix Buffer Write Ready interrupt
  sd/sdhci.c: Only reset data_count on new commands
  xilinx_spips: lqspi: Fix byte/misaligned access
  xilinx_spips: lqspi: Push more data to tx-fifo
  xilinx_spips: Multiple debug verbosity levels
  xilinx_spips: Debug msgs for Snoop state
  xilinx_spips: Fix striping behaviour
  xilinx_spips: Fix CTRL register RW bits
  xilinx_spips: lqspi: Dont touch config register
  xilinx_spips: Implement automatic CS
  xilinx_spips: Add automatic start support
  xilinx_spips: Trash LQ page cache on mode change
  xilinx_spips: Fix QSPI FIFO size
  ...

Message-id: 1370277021-26129-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Unify function and type naming
* use dynamic cast whenever possible
* simplify Debug printf.
* use new style device intialization.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: NPeter Chubb <peter.chubb@nicta.com.au>
Message-id: 1369839656-24466-1-git-send-email-jcd@tribudubois.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Even if we do not register newly created RAM MemoryRegion for migration with
vmstate_register_ram_global() function, ram_save_setup() still saves this region
to snapshot file with empty idstr=="". Consequently this results in error during
VM loading in ram_load().
Register rom_mem for migration.
Signed-off-by: NIgor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Exynos SoC was misusing memory_region_init_ram_ptr(): this interface can safely
be used only for memory regions which size is a multiple of target page size.
Change chipid_and_omr memory to an mmio region to fix this.
Signed-off-by: NIgor Mitsyanko <i.mitsyanko@samsung.com>
Message-id: 1368199981-45292-2-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

There is no common code between these 2 timer implementation.
So it is better to split them.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1368990197-19694-1-git-send-email-jcd@tribudubois.net
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QEMU models two (of the three) ACMD41 has two modes, "inquiry" and
"first". The selection logic for which of the two is incorrect - it
compares != 0 for the entire argument value rather than only bits 23:0
as per the spec. Fix.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3ef0a7fd1b2f3ebb23b4fdeabcc14caf3fad6d71.1369622254.git.peter.crosthwaite@xilinx.com
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The end of transfer check was occurring and potentially returning before
the interrupt flag was checked. This means the interrupt will be missed
if it occurs on the last packet. Fix by checking for the interrupt
before checking for the end of transfer.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 9969ec154777957ec738fc4e539d68e7494d0081.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This message was printing out the data in decimal only, which is not
very friendly to the debugging developer. Add hex variant in
parenthesis to make it consistent with other similar messages in this
module.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: d624179649137832eaa8caa263ef9589b4395d5e.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This interrupt is not risen after the last block is written to sd. It
is mutually exclusive with the end of transfer conditions. Fix.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 7ca9fd3e03ce1bec94aff08f607c15a0ec3d3371.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The data_count variable was being reset on every transfer, including
DMA transfer resumptions. This is incorrect, it should only be set
on a new command.

Manifests as a bug when using ADMA and there is a timer delay between
ADMA frames where the fifo is left in a non empty state.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 15a98609cc32315211b0963091a8efd67522e160.1369370934.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The LQSPI bus attachment supports byte/halfword and misaligned
accesses. Fixed. Refactored the LQSPI cache to be byte-wise
instead of word wise accordingly.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 5ec47b13563ad2d22105a1f26186d7756718394b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Do 16 words per fifo flush. Increases performance and decreases
debug verbosity. This data depth has no real hardware analogue,
so just go with something that has reasonable performance.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 5621ee4621941d3639b5cacfdec26bd3148f31d5.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The debug printfs on every SPI operation is extremely verbose. Add
a second level of debug for this.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: f63478b8e5b29cc011cdc10e29f8537bb2fc2b5e.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is worth keeping track of when debugging the device model.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: d3b44ecf23d671798b062eee5dc362c716ea54cd.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The QSPI controller was using byte-wide stripes when striping across
the two flashes in dual parallel mode. The real hardware however uses
individual bit striping. QEMU misbehaves in the (corner) case where
data is written/read in dual-parallel mode and read/written back in
single mode.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 718a61df1bf746ec06f6da44d12f8317af7b08ce.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The CTRL register was RAZ/WI on some of the RW bits. Even though the
function behind these bits is invalid in QEMU, they should still be
guest accessible. Fix.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: b7aaad93163ce4af0c428635804ac7b77a567b25.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The LQSPI mode is supposed to work via the automatic CS mode feature
rather than manipulate CS lines itself. Now that auto CS is implemented
remove LQSPIs CS mode override logic. There is still a need to
manipulate the U_PAGE bit in LQSPI config register to implement
dual-stack mode however.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 000c8dd54df09523f17052638100722ef0f5a3af.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the automatic CS control feature. If the MANUAL_CS bit is
cleared then the chip select stay de-asserted as long as the tx FIFO
is empty.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1d67383adc42761af715a93f161344b9284dfc9a.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

SPI has a mode where it automatically starts based on tx fifo
occupancy. Implemented.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: f4e9accb5de87b526fff6ed937f63278db76533b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Invalidate the LQSPI cached page when transitioning into LQSPI mode.
Otherwise there is a possibility that the controller will return stale
data to the guest when transitioning back to LQ_MODE after a page
program.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 677490a6ee1953fe5d366e599d665de645ac84db.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QSPI has a bigger FIFO than the regular SPI controller. Differentiate
between the two with correct FIFO sizes for each.

This is the first piece of class data for SPIPS, so this patch sees
the creation of the XilinxSPIPSClass definition and assoicated QOM
constructs.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: acee25dd5e203215cbc15ca5d3cb5d5b2efebe7b.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

You really need this is you want to track a guest banging on LQSPI.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 26e508da4af11058d37daa777064c9e5c2a69abb.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The real hardware does not produce interrupts in LQSPI mode. Inhibit
generation of interrupts when the LQ_MODE bit is set.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: dff794a06872009ea7e5733ce6adcff94d18bbd0.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

By default these interrupts are clear on read.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 999ff0091ed3cc3969a431bf55c00ef934cecc8e.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make SPI and QSPI different classes. QSPIPS is setup as a child of SPIPS.
Only QSPI has the LQSPI functionality, so move all that to the child class.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 2cdd0cadb5ba77ca02fde5cae627852dc9a64c71.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: NÁkos Kovács <akoskovacs@gmx.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1367860492-3357-1-git-send-email-akoskovacs@gmx.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Gerd Hoffmann (5) and others
# Via Gerd Hoffmann
* kraxel/usb.83:
  xhci: add live migration support
  xhci: add xhci_init_epctx
  xhci: add xhci_alloc_epctx
  xhci: add XHCISlot->addressed
  pci: add VMSTATE_MSIX
  host-libusb: Correct test for USB packet state
  Fix usage of USB_DEV_FLAG_IS_HOST flag.

Message-id: 1370253951-12323-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>