- 04 1月, 2012 11 次提交
-
-
由 M. Mohan Kumar 提交于
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 M. Mohan Kumar 提交于
Move p9 marshaling/unmarshaling code to a separate file so that proxy filesytem driver can use these calls. Also made marshaling code generic to accept "struct iovec" instead of V9fsPDU. Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Aneesh Kumar K.V 提交于
This remove all conditional code from common code path and make opt validation a FSDriver callback. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Anthony Liguori 提交于
* qemu-kvm/memory/page_desc: (22 commits) Remove cpu_get_physical_page_desc() sparc: avoid cpu_get_physical_page_desc() virtio-balloon: avoid cpu_get_physical_page_desc() vhost: avoid cpu_get_physical_page_desc() kvm: avoid cpu_get_physical_page_desc() memory: remove CPUPhysMemoryClient xen: convert to MemoryListener API memory: temporarily add memory_region_get_ram_addr() xen, vga: add API for registering the framebuffer vhost: convert to MemoryListener API kvm: convert to MemoryListener API kvm: switch kvm slots to use host virtual address instead of ram_addr_t memory: add API for observing updates to the physical memory map memory: replace cpu_physical_sync_dirty_bitmap() with a memory API framebuffer: drop use of cpu_physical_sync_dirty_bitmap() loader: remove calls to cpu_get_physical_page_desc() framebuffer: drop use of cpu_get_physical_page_desc() memory: introduce memory_region_find() memory: add memory_region_is_logging() memory: add memory_region_is_rom() ...
-
由 Avi Kivity 提交于
No longer used. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This reaches into the innards of the memory core, which are being changed. Switch to a memory API version. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This reaches into the innards of the memory core, which are being changed. Switch to a memory API version. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This reaches into the innards of the memory core, which are being changed. Switch to a memory API version. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This reaches into the innards of the memory core, which are being changed. Switch to a memory API version. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
No longer used. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 27 12月, 2011 3 次提交
-
-
由 Avi Kivity 提交于
Make's multiple output syntax x.c x.h: x.template gen < x.template actually invokes the command once for x.c and once for x.h (with differing $@ in each invocation). During a parallel build, the two commands may be invoked in parallel; this opens up a race, where the second invocation trashes a file supposedly produced during the first, and now in use by a dependent command. The various qapi code generators are susceptible to this; fix by making them generate just one file per invocation. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* aneesh/for-upstream: scripts/analyse-9p-simpletrace.py: Add symbolic names for 9p operations. hw/9pfs: iattr_valid flags are kernel internal flags map them to 9p values. hw/9pfs: Use the correct signed type for different variables hw/9pfs: replace iovec manipulation with QEMUIOVector
-
由 Anthony Liguori 提交于
* bonzini/nbd-for-anthony: (26 commits) nbd: add myself as maintainer qemu-nbd: throttle requests qemu-nbd: asynchronous operation qemu-nbd: add client pointer to NBDRequest qemu-nbd: move client handling to nbd.c qemu-nbd: use common main loop link the main loop and its dependencies into the tools qemu-nbd: introduce NBDRequest qemu-nbd: introduce NBDExport qemu-nbd: introduce nbd_do_receive_request qemu-nbd: more robust handling of invalid requests qemu-nbd: introduce nbd_do_send_reply qemu-nbd: simplify nbd_trip move corking functions to osdep.c qemu-nbd: remove data_size argument to nbd_trip qemu-nbd: remove offset argument to nbd_trip Update ioctl order in nbd_init() to detect EBUSY nbd: add support for NBD_CMD_TRIM nbd: add support for NBD_CMD_FLUSH nbd: add support for NBD_CMD_FLAG_FUA ...
-
- 23 12月, 2011 5 次提交
-
-
由 Gleb Natapov 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Vasilis Liaskovitis 提交于
qemu-kvm passes numa/SRAT topology information for smp_cpus to SeaBIOS. However SeaBIOS always expects to setup max_cpus number of SRAT cpu entries (MaxCountCPUs variable in build_srat function of Seabios). When qemu-kvm runs with smp_cpus != max_cpus (e.g. -smp 2,maxcpus=4), Seabios will mistakenly use memory SRAT info for setting up CPU SRAT entries for the offline CPUs. Wrong SRAT memory entries are also created. This breaks NUMA in a guest. Fix by setting up SRAT info for max_cpus in qemu-kvm. Signed-off-by: NVasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
The latter was already commented out, the former is redundant as well. We always get the latest changes after return from the guest via kvm_arch_post_run. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
Keep a per-VCPU xsave buffer for kvm_put/get_xsave instead of continuously allocating and freeing it on state sync. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
Field 0 (FCW+FSW) and 1 (FTW+FOP) were hard-coded so far. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 22 12月, 2011 21 次提交
-
-
由 Paolo Bonzini 提交于
Not planning to do much else, hence listing it as "Odd Fixes". Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Limiting the number of in-flight requests is implemented very simply with a can_read callback. It does not require a semaphore, unlike the client side in block/nbd.c, because we can throttle directly the creation of coroutines. The client side can have a coroutine created at any time when an I/O request is made. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Using coroutines enable asynchronous operation on both the network and the block side. Network can be owned by two coroutines at the same time, one writing and one reading. On the send side, mutual exclusion is guaranteed by a CoMutex. On the receive side, mutual exclusion is guaranteed because new coroutines immediately start receiving data, and no new coroutines are created as long as the previous one is receiving. Between receive and send, qemu-nbd can have an arbitrary number of in-flight block transfers. Throttling is implemented by the next patch. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
By attaching a client to an NBDRequest, we can avoid passing around the socket descriptor and data buffer. Also, we can now manage the reference count for the client in nbd_request_get/put request instead of having to do it ourselved in nbd_read. This simplifies things when coroutines are used. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This patch sets up the fd handler in nbd.c instead of qemu-nbd.c. It introduces NBDClient, which wraps the arguments to nbd_trip in a single structure, so that we can add a notifier to it. This way, qemu-nbd can know about disconnections. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Using a single main loop for sockets will help yielding from the socket coroutine back to the main loop, and later reentering it. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Using the main loop code from QEMU enables tools to operate fully asynchronously. Advantages include better Windows portability (for some definition of portability) over glib's. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Move the buffer from NBDExport to a new structure, so that it will be possible to have multiple in-flight requests for the same export (and for the same client too---we get that for free). Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Wrap the common parameters of nbd_trip and nbd_negotiate in a single opaque struct. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Group the receiving of a response and the associated data into a new function. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Fail invalid requests with EINVAL instead of dropping them into the void. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Group the sending of a reply and the associated data into a new function. Without corking, the caller would be forced to leave 12 free bytes at the beginning of the data pointer. Not too ugly, but still ugly. :) Using nbd_do_send_reply everywhere will help when the routine will set up the write handler that re-enters the send coroutine. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Use TCP_CORK to remove a violation of encapsulation, that would later require nbd_trip to know too much about an NBD reply. We could also switch to sendmsg (qemu_co_sendv) later, it is even easier once coroutines are in. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The size of the buffer is in practice part of the protocol. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The argument is write-only. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Chunyan Liu 提交于
Update ioctl(s) in nbd_init() to detect device busy early. Current nbd_init() issues NBD_CLEAR_SOCKET before NBD_SET_SOCKET, if issuing "qemu-nbd -c /dev/nbd0 disk.img" twice, the second time won't detect EBUSY in nbd_init(), but in nbd_client will report EBUSY and do clear socket (the 1st time command will be affacted too because of no socket any more.) No change to previous version. Signed-off-by: NChunyan Liu <cyliu@suse.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
bdrv_read and bdrv_write return negative errno values, not -1. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-