Ignore failure with hpet device creation.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be
created.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Convert to qdev, also add a proper reset function.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Allow failure with vmware_vga device creation and use standard
VGA instead.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Turn vmsvga_init into an inline function.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

1) Move GPIO-related functionality to qdev. Now one can use directly
qdev_get_gpio_in()/qdev_connect_gpio_out() on max7310 devices.

2) Make reset to be called through qdev.reset callback.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Seceral files contained onnecessary dependencies on hw/pxa.h header.
Drop unused references.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

These two fields were added as a part of ARMv7 support patch (back in
2007), were never used by any code, so can be dropped.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Remove a stray #include <stdio.h> from the middle of neon_helper.c:
it was harmless but pointless since we include stdio.h at the top
of the file anyway.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add uses of the float32/float64 boxing and unboxing macros so that
the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES
enabled.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make softfloat compile with USE_SOFTFLOAT_STRUCT_TYPES defined, by
adding and using new macros const_float16(), const_float32() and
const_float64() so you can use array initializers in an array of
float16/float32/float64 whether the types are bare or wrapped in the
structs.

[aurelien@aurel32.net: do the same for float16]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The Neon half-precision conversion operations (VCVT.F16.F32 and
VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike
the VFP versions (VCVTB and VCVTT).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Silence the NaNs that may result from half-precision conversion,
as we do for the other conversions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correctly handle NaNs in float16_to_float32(), by defining and
using a float16ToCommonNaN() function, as we do with the other formats.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix various bugs in the single-to-half-precision conversion code:
 * input NaNs not correctly converted in IEEE mode
   (fixed by defining and using a commonNaNToFloat16())
 * wrong values returned when converting NaN/Inf into non-IEEE
   half precision value
 * wrong values returned for conversion of values which are
   on the boundary between denormal and zero for the half
   precision format
 * zeroes not correctly identified
 * excessively large results in non-IEEE mode should
   generate InvalidOp, not Overflow
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Honour the default_nan_mode flag when doing conversions between
different floating point formats, as well as when returning a NaN from
a two-operand floating point function. This corrects the behaviour
of float<->double conversions on both ARM and SH4.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add a float16 type to softfloat, rather than using bits16 directly.
Also add the missing functions float16_is_quiet_nan(),
float16_is_signaling_nan() and float16_maybe_silence_nan(),
which are needed for the float16 conversion routines.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This function is only used within exec.c, so no need to make it public.
Signed-off-by: NTristan Gingold <gingold@adacore.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu:
  linux-user: fix for loopmount ioctl
  linux-user: fix build errors for mmap2-only ports
  user: speed up init_paths a bit
  linux-user: implement sched_{g,s}etaffinity
  linux-user/FLAT: allow targets to override FLAT processing
  linux-user/FLAT: fix auto-stack sizing
  linux-user: decode MAP_{UNINITIALIZED,EXECUTABLE} in strace
  linux-user: add ppoll syscall support
  linux-user/elfload: add FDPIC support
  linux-user: fix sizeof handling for getsockopt
  linux-user: Fix possible realloc memory leak
  linux-user: Add support for -version option

Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix bit mask used when widening the result of shift on narrow input.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

MIPS FPU instructions should start with a clean softfpu status. This
is done for the arithmetic operations and cvt instructions, but not
for round, trunc, ceil and floor.
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The returned value when doing saturating signed 64->32 bit
conversion of a negative number was incorrect due to a missing cast.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

VQMOVUN does a signed-to-unsigned saturating conversion. This is
different from both the signed-to-signed and unsigned-to-unsigned
conversions already implemented, so we need a new set of helper
functions (neon_unarrow_sat*).
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In case a chrooted build uses XEN or KVM, a looped mount needs to be done to setup the chroot.
The ioctl for loop mount works correctly for arm, mips, ppc32 and sh4, so its now activated.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

The current print_mmap func is only enabled when the target supports the
mmap syscall, but both mmap and mmap2 syscalls use it.  This leads to a
build failure when the target supports mmap2 but not mmap.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>