- 22 6月, 2015 5 次提交
-
-
由 Bandan Das 提交于
When a command fails due to incorrect syntax or input, suggest using the "help" command to get more information about the command. This is only applicable for HMP. Signed-off-by: NBandan Das <bsd@redhat.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Bandan Das 提交于
There's too much going on in monitor_parse_command(). Split up the arguments parsing bits into a separate function monitor_parse_arguments(). Let the original function check for command validity and sub-commands if any and return data (*cmd) that the newly introduced function can process and return a QDict. Also, pass a pointer to the cmdline to track current parser location. Suggested-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NBandan Das <bsd@redhat.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Bandan Das 提交于
The preferred solution is to use tracepoints and there is good chance of bitrot with the debug prints not being enabled at compile time. Remove them. Suggested-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NBandan Das <bsd@redhat.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
Now that qbool is fixed, let's fix getting and setting a bool value to a qdict member to also use C99 bool rather than int. I audited all callers to ensure that the changed return type will not cause any changed semantics. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NAlberto Garcia <berto@igalia.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 15 6月, 2015 1 次提交
-
-
由 Kővágó, Zoltán 提交于
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log to the monitor before it's being initialized), and also nothing else in qemu logs to the monitor. This log to monitor feature was the last thing that used the default_mon variable, so I removed it too (as using it can cause problems). Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 12 6月, 2015 1 次提交
-
-
由 Scott Feldman 提交于
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 08 6月, 2015 1 次提交
-
-
由 Markus Armbruster 提交于
Commit 65207c59 accidentally dropped a line of code we need along with a comment that became wrong then. This made QMP reject "id": {"execute": "system_reset", "id": "1"} {"error": {"class": "GenericError", "desc": "QMP input object member 'id' is unexpected"}} Put the lost line right back, so QMP again accepts and returns "id", as promised by the ABI: {"execute": "system_reset", "id": "1"} {"return": {}, "id": "1"} Reported-by: NFabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NDon Slutz <dslutz@verizon.com> Tested-by: NFabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Tested-by: NEric Blake <eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-id: 1433753070-12632-2-git-send-email-armbru@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 02 6月, 2015 19 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
... and change return type to bool. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
While there, inline the pointless qmp_cmd_mode() wrapper. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Superfluous since commit 30f5041e removed it from HMP. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
While there, rename its type as well, from MonitorControl to MonitorQMP. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
... to monitor_qmp_read(), monitor_qmp_event(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
The previous commits narrowed use of QError to handle_qmp_command() and its helpers monitor_protocol_emitter(), build_qmp_error_dict(). Narrow it further to just the command handler call: instead of converting Error to QError throughout handle_qmp_command(), convert the QError gotten from the command handler to Error, and switch the helpers from QError to Error. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Move mon->error handling to its caller handle_qmp_command(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Protocol must be spice, vnc isn't implemented. Fix up documentation. Attempts to use vnc or any other unknown protocol yield the misleading error message "Invalid parameter 'protocol'". Improve it to "Parameter 'protocol' expects spice". Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by. Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
Inline qmp_call_cmd() along with its helper handler_audit() into its only caller handle_qmp_command(), and simplify the result. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Markus Armbruster 提交于
The asynchronous monitor command interface goes back to commit 940cc30d (Jan 2010). Added a third case to command execution. The hope back then according to the commit message was that all commands get converted to the asynchronous interface, killing off the other two cases. Didn't happen. The initial asynchronous commands balloon and info balloon were converted back to synchronous long ago (commit 96637bcd and d72f32), with commit messages calling the asynchronous interface "not fully working" and "deprecated". The only other user went away in commit 3b5704b2. New code generally uses synchronous commands and asynchronous events. What exactly is still "not fully working" with asynchronous commands? Well, here's a bug that defeats actual asynchronous use pretty reliably: the reply's ID is wrong (and has always been wrong) unless you use the command synchronously! To reproduce, we need an asynchronous command, so we have to go back before commit 3b5704b2. Run QEMU with spice: $ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio {"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} Connect a spice client in another terminal: $ remote-viewer spice://localhost:5900 Set up a migration destination dummy in a third terminal: $ socat TCP-LISTEN:12345 STDIO Now paste the following into the QMP monitor: { "execute": "qmp_capabilities", "id": "i0" } { "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } } { "execute": "query-kvm", "id": "i2" } Produces two replies immediately, one to qmp_capabilities, and one to query-kvm: {"return": {}, "id": "i0"} {"return": {"enabled": false, "present": true}, "id": "i2"} Both are correct. Two lines of debug output from libspice-server not shown. Now EOF socat's standard input to make it close the connection. This makes the asynchronous client_migrate_info complete. It replies: {"return": {}} Bug: "id": "i1" is missing. Two lines of debug output from libspice-server not shown. Cherry on top: storage for the missing ID is leaked. Get rid of this stuff before somebody hurts himself with it. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 08 5月, 2015 1 次提交
-
-
由 Liang Li 提交于
Add the hmp interface to tune and query the parameters used in live migration. Signed-off-by: NLiang Li <liang.z.li@intel.com> Signed-off-by: NYang Zhang <yang.z.zhang@intel.com> Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
- 30 4月, 2015 1 次提交
-
-
由 Thomas Huth 提交于
The functions ringbuf_read_completion() and monitor_get_rs() are not used anywhere anymore, so let's remove them. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 28 4月, 2015 2 次提交
-
-
由 Jason Wang 提交于
qemu_find_net_clients_except() may return a value which is greater than the size of array we provided. So we should check this value before using it, otherwise this may cause unexpected memory access. This patch fixes the net related command completion when we have a virtio-net nic with more than 255 queues. Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jason Wang 提交于
This patch replace the magic number 255, and increase it to MAX_QUEUE_NUM which is maximum number of queues supported by a nic. Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 27 4月, 2015 1 次提交
-
-
由 Markus Armbruster 提交于
Live migration with spice works like this today: (1) client_migrate_info monitor cmd (2) spice server notifies client, client connects to target host. (3) qemu waits until spice client connect is finished. (4) send over vmstate (i.e. main part of live migration). (5) spice handover to target host. (3) is implemented by making client_migrate_info a async monitor command. This is the only async monitor command we have. The original reason to implement this dance was that qemu did not accept new tcp connections while the incoming migration was running, so (2) and (4) could not be done in parallel. That issue was fixed long ago though. Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp connects while the incoming migration runs. Time to drop step (3). This patch does exactly that, by making the monitor command synchronous and removing the code needed to handle the async monitor command in ui/spice-core.c Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 26 4月, 2015 1 次提交
-
-
由 Peter Maydell 提交于
Switch all the uses of ld/st*_phys to address_space_ld/st*, except for those cases where the address space is the CPU's (ie cs->as). This was done with the following script which generates a Coccinelle patch. A few over-80-columns lines in the result were rewrapped by hand where Coccinelle failed to do the wrapping automatically, as well as one location where it didn't put a line-continuation '\' when wrapping lines on a change made to a match inside a macro definition. ===begin=== #!/bin/sh -e # Usage: # ./ldst-phys.spatch.sh > ldst-phys.spatch # spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch # patch -p1 < out.patch for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do cat <<EOF @ cpu_matches_ld_${FN} @ expression E1,E2; identifier as; @@ ld${FN}_phys(E1->as,E2) @ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @ expression E1,E2; @@ -ld${FN}_phys(E1,E2) +address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL) EOF done for FN in b w_le w_be l_le l_be q_le q_be w l q; do cat <<EOF @ cpu_matches_st_${FN} @ expression E1,E2,E3; identifier as; @@ st${FN}_phys(E1->as,E2,E3) @ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @ expression E1,E2,E3; @@ -st${FN}_phys(E1,E2,E3) +address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL) EOF done ===endit=== Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Eric Blake 提交于
Pretending that QMP doesn't understand a command merely because we are not in the right mode doesn't help first-time users figure out what to do to correct things. Although the documentation for QMP calls out capabilities negotiation, we should also make it clear in our error messages what we were expecting. With this patch, I now get the following transcript: $ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults {"QMP": {"version": {"qemu": {"micro": 93, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}} {"execute":"huh"} {"error": {"class": "CommandNotFound", "desc": "The command huh has not been found"}} {"execute":"quit"} {"error": {"class": "CommandNotFound", "desc": "Expecting capabilities negotiation with 'qmp_capabilities' before command 'quit'"}} {"execute":"qmp_capabilities"} {"return": {}} {"execute":"qmp_capabilities"} {"error": {"class": "CommandNotFound", "desc": "Capabilities negotiation is already complete, command 'qmp_capabilities' ignored"}} {"execute":"quit"} {"return": {}} {"timestamp": {"seconds": 1429110729, "microseconds": 181935}, "event": "SHUTDOWN"} Signed-off-by: NEric Blake <eblake@redhat.com> Tested-By: NKashyap Chamarthy <kchamart@redhat.com> Reviewed-by: NPaulo Vital <paulo.vital@profitbricks.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 19 3月, 2015 1 次提交
-
-
由 Stefan Weil 提交于
Sparse report: hw/display/vga.c:2000:5: warning: returning void-valued expression hw/intc/arm_gic.c:707:9: warning: returning void-valued expression hw/intc/etraxfs_pic.c:138:9: warning: returning void-valued expression hw/nvram/fw_cfg.c:475:5: warning: returning void-valued expression hw/timer/a9gtimer.c:124:5: warning: returning void-valued expression hw/tpm/tpm_tis.c:794:5: warning: returning void-valued expression hw/usb/hcd-musb.c:558:9: warning: returning void-valued expression hw/usb/hcd-musb.c:776:13: warning: returning void-valued expression hw/usb/hcd-musb.c:867:5: warning: returning void-valued expression hw/usb/hcd-musb.c:932:5: warning: returning void-valued expression include/qom/cpu.h:584:5: warning: returning void-valued expression monitor.c:4686:13: warning: returning void-valued expression monitor.c:4690:13: warning: returning void-valued expression Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
- 18 3月, 2015 1 次提交
-
-
由 Alexey Kardashevskiy 提交于
2ed1ebcf "timer: replace time() with QEMU_CLOCK_HOST" broke compile when configured with --enable-profiler. Turned out the profiler has been broken for a while. This does s/qemu_time/tcg_time/ as the profiler only works in a TCG mode. This also fixes the compile error. This changes profile_getclock() to return nanoseconds rather than CPU ticks as the "profile" HMP command prints seconds and there is no platform-independent way to get ticks-per-second rate. Since TCG is quite slow and get_clock() returns nanoseconds (fine enough), this should not affect precision much. This removes unused qemu_time_start and tlb_flush_time. Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <1426478258-29961-1-git-send-email-aik@ozlabs.ru> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 3月, 2015 4 次提交
-
-
由 Andreas Färber 提交于
To complement qdev's bus-oriented info qtree, info qom-tree prints a hierarchical view of the QOM composition tree. By default, the machine composition tree is shown. This can be overriden by supplying a path argument, such as "info qom-tree /". Tested-by: NAlistair Francis <alistair.francis@xilinx.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Markus Armbruster 提交于
monitor_read_bdrv_key_start() does several things: 1. If no key is needed, call completion_cb() and succeed 2. If we're in QMP context, call qerror_report_err() and fail 3. Start reading the key in the monitor. This is two things too many. Inline 1. and 2. into its callers monitor_read_block_device_key() and usb_msd_realize_storage(). Since monitor_read_block_device_key() only ever runs in HMP context, drop 2. there. The next commit will clean up the result in usb_msd_realize_storage(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Markus Armbruster 提交于
Function is only called in HMP context since commit 333a96ec "qapi: Convert change". Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-