- 04 12月, 2009 40 次提交
-
-
由 Alexander Graf 提交于
Some recent change made PPC guests always start at address 0x0 because env isn't synced to kvm_state on first bootup. I'm not sure if this is the correct bugfix, but at least it makes PPC boot again with KVM enabled. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Alexander Graf 提交于
While x86 only needs to sync cr0-4 to know all about its MMU state and enable qemu to resolve virtual to physical addresses, we need to sync all of the segment registers on PPC to know which mapping we're in. So let's grab the segment register contents to be able to use the "x" monitor command and also enable the gdbstub to resolve virtual addresses. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Michael S. Tsirkin 提交于
Cirrus vga has a copy of many PCI macros, and it doesn't even use them. Clean up. We also don't need to override header type as it is NORMAL by default. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
PCI memory should be disabled at reset, otherwise we might claim transactions at address 0. I/O should also be disabled, although for cirrus it is harmless to enable it as we do not have I/O bar. Note: bios fix needed for this patch to work was already applied: previously bios incorrently assumed that it does not need to enable i/o unless device has i/o bar. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
I haven't heard yet of anyone using qemu-img to copy an image to a real floppy, but it's a valid use case. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
Oh joy... Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
Currently qcow2 unnecessarily rounds up the length of the backing format string to the next multiple of 8. At the same time, the array in BlockDriverState can only hold 15 characters, so in effect backing formats with 9 characters or more don't work (e.g. host_device). Save the real string length and things start to work for all valid image format names. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
rerror controls the action to be taken when an error occurs while accessing the guest image file. It corresponds to werror which already controls the action take for write errors. This purely introduces parsing rerror command line option into the right structures, real support for it in the device emulation is added in the following patches. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
Either rename variables and functions to refer to write errors (which is what they actually do) or introduce a parameter to distinguish reads and writes. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
As we may do more than one migration (cancellation, live backup), reset bytes_transferred on stage 1. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
The opts id is always allocated via qemu_strdup, so it need not be const, but it has to be released on opts deletion. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
The effect of this patch with current block migration is that its stage 2, ie. the first full walk-through of the block devices will be performed completely before RAM migration starts. This ensures that continuously changing RAM pages are not re-synchronized all the time while block migration is not completed. Future versions of block migration which will respect the specified downtime will generate a different pattern: After RAM migration has started as well, block migration may also continue to inject dirty blocks into the RAM stream once it detects that the number of pending blocks would extend the downtime unacceptably. Note that all this relies on the current registration order: block before RAM migration. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
No need to migrate emptiness (risking divide by zero later on). Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
4K is too small for efficiently saving and restoring multi-GB block devices. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Inject progress report in percentage into the block live stream. This can be read out and displayed easily on restore. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Report progress of an outgoing live migration to the monitor instead of stdout. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
In order to allow proper progress reporting to the monitor that initiated the migration, forward the monitor reference through the migration layer down to SaveLiveStateHandler. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
So far progress reporting only works for the first block device. Fix this by keeping an overall sum of sectors to be migratated, calculating the sum of all processed sectors, and finally basing the progress display on those values. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Introduce qemu_savevm_state_cancel and inject a stage -1 to cancel a live migration. This gives the involved subsystems a chance to clean up dynamically allocated resources. Namely, the block migration layer can now free its device descriptors and pending blocks. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Besides catching real errors, this also allows to interrrupt the qemu process during restore. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Based on the original patch by Pierre Riteau: Use a common blk_send function to transmit a block. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Both functions share a lot of code, so make them one. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
We already save total_sectors in BlkMigDevState, let's use this value during the migration and avoid to recalculate it needlessly. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
In case we restart a migration, submitted, read_done, transferred, and print_completion need to be reinitialized to 0. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Based on the original patch by Pierre Riteau. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Pierre Riteau 提交于
Signed-off-by: NPierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
No need to push block_mig_state to the heap and, thus, establish an indirection. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Move a potentially large buffer from stack to heap. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
This switches the dirty bitmap to a true bitmap, reducing its footprint (specifically in caches). It moreover fixes off-by-one bugs in set_dirty_bitmap (nb_sectors+1 were marked) and bdrv_get_dirty (limit check allowed one sector behind end of drive). And is drops redundant dirty_tracking field from BlockDriverState. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Instead of duplicating the definition of constants or introducing trivial retrieval functions move the SECTOR constants into the public block API. This also obsoletes sector_per_block in BlkMigState. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
No functional changes. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
qemu_fclose frees the passed file structure, but do_migrate_set_speed may access it later on. Fix it by setting file NULL in migrate_fd_cleanup and checking for this. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-