For M profile we must clear the exclusive monitor on reset, exception
entry and exception exit.  We weren't doing any of these things; fix
this bug.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 1505137930-13255-3-git-send-email-peter.maydell@linaro.org

Use a symbolic constant M_REG_NUM_BANKS for the array size for
registers which are banked by M profile security state, rather
than hardcoding lots of 2s.
Suggested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1505137930-13255-2-git-send-email-peter.maydell@linaro.org

HMP pull 2017-09-14

# gpg: Signature made Thu 14 Sep 2017 15:57:30 BST
# gpg:                using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-hmp-20170914:
  hmp: introduce 'info memory_size_summary' command
  qmp: introduce query-memory-size-summary command
  hmp: extend "info numa" with hotplugged memory information
  tests/hmp: test "none" machine with memory
  dump: do not dump non-existent guest memory
  hmp: fix "dump-quest-memory" segfault (arm)
  hmp: fix "dump-quest-memory" segfault (ppc)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:

  * base-memory - size of "base" memory specified with command line option -m.

  * plugged-memory - amount of memory that was hot-plugged.
    If target does not have CONFIG_MEM_HOTPLUG enabled, no
    value is reported.
Signed-off-by: NVasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: NMohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: NEduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: NVadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: NEugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed up comments from Igor's review

Add a new query-memory-size-summary command which provides the
following memory information in bytes:

  * base-memory - size of "base" memory specified with command line option -m.

  * plugged-memory - amount of memory that was hot-plugged.
    If target does not have CONFIG_MEM_HOTPLUG enabled, no
    value is reported.
Signed-off-by: NVasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: NMohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: NEduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: NVadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: NEugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
  Fixup comments as per Igor's review
  Added 'of' from Vadim's reply

Report amount of hotplugged memory in addition to total
amount per NUMA node.
Signed-off-by: NVadim Galitsyn <vadim.galitsyn@profitbricks.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-2-vadim.galitsyn@profitbricks.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

and add a test case of dump-guest-memory without
"[begin length]" parameters.
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Message-Id: <20170913142036.2469-5-lvivier@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

It does not really make sense to dump memory that is not there.

Moreover, that fixes a segmentation fault when calling dump-guest-memory
with no filter for a machine with no memory defined.

New behaviour is:

(qemu) dump-guest-memory /dev/null
dump: no guest memory to dump
(qemu) dump-guest-memory /dev/null 0 4096
dump: no guest memory to dump
Signed-off-by: NCornelia Huck <cohuck@redhat.com>
Tested-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20170913142036.2469-4-lvivier@redhat.com>
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Running QEMU with
    qemu-system-aarch64 -M none -nographic -m 256
and executing
    dump-guest-memory /dev/null 0 8192
results in segfault

Fix by checking if we have CPU, and exit with
error if there is no CPU:

    (qemu) dump-guest-memory /dev/null
    this feature or command is not currently supported
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Message-Id: <20170913142036.2469-3-lvivier@redhat.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

Running QEMU with
    qemu-system-ppc64 -M none -nographic -m 256
and executing
    dump-guest-memory /dev/null 0 8192
results in segfault

Fix by checking if we have CPU, and exit with
error if there is no CPU:

    (qemu) dump-guest-memory /dev/null
    this feature or command is not currently supported
Signed-off-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20170913142036.2469-2-lvivier@redhat.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

usb: misc small fixes.

# gpg: Signature made Wed 13 Sep 2017 10:28:25 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20170913-pull-request:
  usb: only build usb-host with CONFIG_USB=y
  usb: drop HOST_USB
  MAINTAINERS: add missing USB entry
  xhci: Avoid DMA when ERSTBA is set to zero
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Older compilers (rhel6) don't like redefinition of typedefs

Fixes: 12a6c15eSigned-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170914123609.497-1-dgilbert@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ui: console fixes
drop pixman submodule

# gpg: Signature made Wed 13 Sep 2017 09:40:34 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20170913-pull-request:
  console: add question-mark escape operator
  console: fix dpy_gfx_replace_surface assert
  pixman: drop configure switches
  pixman: drop submodule
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vga: bugfixes.
qxl: chunked cursor support.

# gpg: Signature made Wed 13 Sep 2017 08:41:08 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20170913-pull-request:
  virtio-gpu: don't clear QemuUIInfo information on reset
  vga/migration: Update memory map in post_load
  qxl: add support for chunked cursors.
  qxl: drop mono cursor support
  vga: stop passing pointers to vga_draw_line* functions
  vga: fix display update region calculation (split screen)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-3-kraxel@redhat.com

Nowdays we use libusb for usb-host, so we don't have different code
for linux vs. bsd any more.  So there is little reason to have the
HOST_USB variable, we can just write things directly into the Makefile
and avoid a pointless indirection.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-2-kraxel@redhat.com

Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The existing XHCI code reads the Event Ring Segment Table Base Address
Register (ERSTBA) every time when it is changed. However zero is its
default state so one would think that zero there means it is not in use.

This adds a check for ERSTBA in addition to the existing check for
the Event Ring Segment Table Size Register (ERSTSZ).
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 20170911065606.40600-1-aik@ozlabs.ru
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Some termcaps (found using SLES11SP1) use [? sequences. According to man
console_codes (http://linux.die.net/man/4/console_codes) the question mark
is a nop and should simply be ignored.

This patch does exactly that, rendering screen output readable when
outputting guest serial consoles to the graphical console emulator.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Message-id: 20170829113818.42482-1-agraf@suse.de
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

virtio-gpu can trigger the assert added by commit "6905b934 console:
add same surface replace pre-condition" in multihead setups (where
surface can be NULL for secondary displays).  Allow surface being NULL.

Fixes: 6905b934Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142109.2685-1-kraxel@redhat.com

Remove pixman switches from configure, should not be needed any more,
configure can figure by itself whenever pixman is needed or not.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-3-kraxel@redhat.com

Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more.  While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com

Don't reset window layout information (passed via virtio_gpu_ui_info) on
device reset, so the user interface window layout will be kept intact
over reboots.  The head size and position was commented out already, so
this patch just drops the dead code.  Additionally the enabled head mask
must be kept so multihead setups work properly too.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1460595Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142058.2460-1-kraxel@redhat.com

changed in 659ef5cb, this fixes building with --enable-tcg-interpreter:

/home/travis/build/qemu/qemu/tcg/tcg.c:116:14: error: ‘tcg_out_ldst_finalize’ used but never defined [-Werror]
 static bool tcg_out_ldst_finalize(TCGContext *s);
              ^
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20170911022839.23231-1-f4bug@amsat.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Mon 11 Sep 2017 08:08:39 BST
# gpg:                using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images to 314d4f8 built from submodule.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Sun 10 Sep 2017 17:17:28 BST
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-2.11-pull-request:
  target/m68k: Switch fpu_rom from make_floatx80() to make_floatx80_init()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

GCC 4.7.2 on SunOS reports that the values assigned to array members are not
real constants:

target/m68k/fpu_helper.c:32:5: error: initializer element is not constant
target/m68k/fpu_helper.c:32:5: error: (near initialization for 'fpu_rom[0]')
rules.mak:66: recipe for target 'target/m68k/fpu_helper.o' failed

Convert the array to make_floatx80_init() to fix it.
Replace floatx80_pi-like constants with make_floatx80_init() as they are
defined as make_floatx80().

This fixes build on SmartOS (Joyent).
Signed-off-by: NKamil Rytarowski <n54@gmx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170904212306.3020-1-n54@gmx.com>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

pc, pci, virtio: patches queued before 2.10

A bunch of stuff that was posted before the 2.10 timeframe,
mostly fixes/cleanups.  New PCI bridges.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 08 Sep 2017 14:15:34 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  fw_cfg: rename read callback
  pci: add reserved slot check to do_pci_register_device()
  pci: move check for existing devfn into new pci_bus_devfn_available() helper
  vmgenid: replace x-write-pointer-available hack
  vhost-user-bridge: fix resume regression (since 2.9)
  libvhost-user: support resuming vq->last_avail_idx based on used_idx
  acpi/vmgenid: change device category to misc
  intel_iommu: fix missing BQL in pt fast path
  docs: update documentation considering PCIE-PCI bridge
  hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port
  hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware
  hw/pci: introduce pcie-pci-bridge device
  Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen"
  hw/acpi: Move acpi_set_pci_info to pcihp
  hw/acpi: Limit hotplug to root bus on legacy mode
  pc: add 2.11 machine types
  vhost: Release memory references on cleanup
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue 2017-09-08

This is the first batch of ppc related patches for qemu-2.11, and it's
accumulated quite a few things.  Includes:

  * A cleanup to handling of ppc cpu models from Igor
  * First parts of fixes to handling of guest vs. host SMT modes from
    Sam Bobroff
  * Preliminary patches towards supporting the Sam460 board from
    Balaton Zoltan
  * Several fixes for hotplug logic
  * Assorted other fixes and cleanups

# gpg: Signature made Fri 08 Sep 2017 06:28:42 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.11-20170908: (40 commits)
  ppc: spapr: Move VCPU ID calculation into sPAPR
  ppc: remove non implemented cpu models
  ppc: drop caching ObjectClass from PowerPCCPUAlias
  ppc: simplify cpu model lookup by PVR
  ppc: replace inter-function cyclic dependency/recurssion with 2 simple lookups
  ppc: make cpu alias point only to real cpu models
  ppc: make cpu_model translation to type consistent
  ppc: use macros to make cpu type name from string literal
  target/ppc: Remove old STATUS file
  PPC: KVM: Support machine option to set VSMT mode
  spapr: fallback to raw mode if best compat mode cannot be set during CAS
  hw/nvram/spapr_nvram: Device can not be created by the users
  hw/ppc/spapr_cpu_core: Add a proper check for spapr machine
  ppc4xx: Export ECB and PLB emulation
  ppc4xx_i2c: Move to hw/i2c
  ppc4xx_i2c: QOMify
  ppc4xx: Split off 4xx I2C emulation from ppc405_uc to its own file
  ppc4xx: Make MAL emulation more generic
  ppc4xx: Move MAL from ppc405_uc to ppc4xx_devs
  spapr_iommu: Realloc guest visible TCE table when hot(un)plugging vfio-pci
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The callback is called on select.

Furthermore, the next patch introduced a new callback, so rename the
function type with a generic name.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each
PCI slot on the bus is reserved. Ensure that it is initialised to zero to
maintain the existing behaviour that all slots are available by default, and
add the additional check with appropriate error reporting to
do_pci_register_device().
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Also touch up the logic in do_pci_register_device() accordingly.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This compat property sole function is to prevent the device from being
instantiated. Instead of requiring an extra compat property, check if
fw_cfg has DMA enabled.

fw_cfg is a built-in device that is initialized very early by the
machine init code.  We have at least one other device that also
assumes fw_cfg_find() can be safely used on realize: pvpanic.

This has the additional benefit of handling other cases properly, like:

  $ qemu-system-x86_64 -device vmgenid -machine none
  qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
  $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.9 -global fw_cfg.dma_enabled=off
  qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
  $ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.6 -global fw_cfg.dma_enabled=on
  [boots normally]
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NBen Warren <ben@skyportsystems.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit e10e798c switched to libvhost-user which lacked support
for resuming the avail_idx based on used_idx.

Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1485867Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This is the same workaround as commit 523b018d, which was lost
with libvhost-user transition in commit e10e798c.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Moved vmgenid from uncategorized to misc category in QEMU help menu
Signed-off-by: NYoni Bettan <ybettan@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

In vtd_switch_address_space() we did the memory region switch, however
it's possible that the caller of it has not taken the BQL at all. Make
sure we have it.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NAleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Tested-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

To enable hotplugging of a newly created pcie-pci-bridge,
we need to tell firmware (e.g. SeaBIOS) to reserve
additional buses or IO/MEM/PREF space for pcie-root-port.
Additional bus reservation allows us to hotplug pcie-pci-bridge into this root port.
The number of buses and IO/MEM/PREF space to reserve are provided to the device via
a corresponding property, and to the firmware via new PCI capability.
The properties' default values are -1 to keep default behavior unchanged.
Signed-off-by: NAleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Tested-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>