Add enum for BREAK32
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Implement the relationship between CP0.Status.KX, SX and UX. It should not
be possible to set UX bit if SX is 0, the same applies for setting SX if
KX is 0.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

In Release 6, the behaviour of WAIT has been modified to make it a
requirement that a processor that has disabled operation as a result of
executing a WAIT will resume operation on arrival of an interrupt even if
interrupts are not enabled.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

virtio, pc, memory: fixes+features for 2.5

New features:
    This enables hotplug for multifunction devices.
    Patches are very small, so I think it's OK to merge
    at this stage.

    There's also some new infrastructure for vhost-user testing
    not enabled yet so it's harmless to merge.

I've reverted the "gap between DIMMs" workaround, as it seems too risky, and
applied my own patch in virtio, but not in dataplane code.  This means that
dataplane is broken for some complex DIMM configurations for now.  Waiting for
Stefan to review the dataplane fix.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 29 Oct 2015 09:36:16 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  enable multi-function hot-add
  remove function during multi-function hot-add
  tests/vhost-user-bridge: add vhost-user bridge application
  Revert "memhp: extend address auto assignment to support gaps"
  Revert "pc: memhp: force gaps between DIMM's GPA"
  virtio: drop virtqueue_map_sg
  virtio-scsi: convert to virtqueue_map
  virtio-serial: convert to virtio_map
  virtio-blk: convert to virtqueue_map
  virtio: switch to virtio_map
  virtio: introduce virtio_map
  mmap-alloc: fix error handling
  pc: memhp: do not emit inserting event for coldplugged DIMMs
  vhost-user-test: fix up rhel6 build
  vhost-user: cleanup msg size math
  vhost-user: cleanup struct size math
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will get the notification to scan the slot.
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

In case user want to cancel the hot-add operation, should roll back,
device_del the added function that still don`t work.
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The test existing in QEMU for vhost-user feature is good for
testing the management protocol, but does not allow actual
traffic. This patch proposes Vhost-User Bridge application, which
can serve the QEMU community as a comprehensive test by running
real internet traffic by means of vhost-user interface.

Essentially the Vhost-User Bridge is a very basic vhost-user
backend for QEMU. It runs as a standalone user-level process.
For packet processing Vhost-User Bridge uses an additional QEMU
instance with a backend configured by "-net socket" as a shared
VLAN.  This way another QEMU virtual machine can effectively
serve as a shared bus by means of UDP communication.

For a more simple setup, the another QEMU instance running the
SLiRP backend can be the same QEMU instance running vhost-user
client.

This Vhost-User Bridge implementation is very preliminary.  It is
missing many features. I has been studying vhost-user protocol
internals, so I've written vhost-user-bridge bit by bit as I
progressed through the protocol.  Most probably its internal
architecture will change significantly.

To run Vhost-User Bridge application:

1. Build vhost-user-bridge with a regular procedure. This will
create a vhost-user-bridge executable under tests directory:

    $ configure; make tests/vhost-user-bridge

2. Ensure the machine has hugepages enabled in kernel with
command line like:

    default_hugepagesz=2M hugepagesz=2M hugepages=2048

3. Run Vhost-User Bridge with:

    $ tests/vhost-user-bridge

The above will run vhost-user server listening for connections
on UNIX domain socket /tmp/vubr.sock, and will try to connect
by UDP to VLAN bridge to localhost:5555, while listening on
localhost:4444

Run qemu with a virtio-net backed by vhost-user:

    $ qemu \
        -enable-kvm -m 512 -smp 2 \
        -object memory-backend-file,id=mem,size=512M,mem-path=/dev/hugepages,share=on \
        -numa node,memdev=mem -mem-prealloc \
        -chardev socket,id=char0,path=/tmp/vubr.sock \
        -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
        -device virtio-net-pci,netdev=mynet1 \
        -net none \
        -net socket,vlan=0,udp=localhost:4444,localaddr=localhost:5555 \
        -net user,vlan=0 \
        disk.img

vhost-user-bridge was tested very lightly: it's able to bringup a
linux on client VM with the virtio-net driver, and execute transmits
and receives to the internet. I tested with "wget redhat.com",
"dig redhat.com".

PS. I've consulted DPDK's code for vhost-user during Vhost-User
Bridge implementation.
Signed-off-by: NVictor Kaplansky <victork@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This reverts commit df0acded.

There's no point to it now that the only user has been reverted.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This reverts commit aa8580cd.

As described in
http://article.gmane.org/gmane.comp.emulators.qemu/371432
that commit causes linux guests to crash on memory hot-unplug.

The original problem it's trying to solve has now
been addressed within virtio.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Deprecated in favor of virtqueue_map.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Note: virtqueue_map already validates input
so virtio-scsi does not have to.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

This also fixes a minor bug:
-                virtqueue_map_sg(port->elem.out_sg, port->elem.out_addr,
-                                 port->elem.out_num, 1);
is wrong: out_sg is not written so should not be marked dirty.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Drop deprecated use of virtqueue_map_sg.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Drop use of the deprecated virtio_map_sg in virtio core.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

virtio_map_sg currently fails if one of the entries it's mapping is
contigious in GPA but not HVA address space.  Introduce virtio_map which
handles this by splitting sg entries.

This new API generally turns out to be a good idea since it's harder to
misuse: at least in one case the existing one was used incorrectly.

This will still fail if there's no space left in the sg, but luckily max
queue size in use is currently 256, while max sg size is 1024, so we
should be OK even is all entries happen to cross a single DIMM boundary.

Won't work well with very small DIMM sizes, unfortunately:
e.g. this will fail with 4K DIMMs where a single
request might span a large number of DIMMs.

Let's hope these are uncommon - at least we are not breaking things.

Note: virtio-scsi calls virtio_map_sg on data loaded from network, and
validates input, asserting on failure.  Copy the validating code here -
it will be dropped from virtio-scsi in a follow-up patch.
Reported-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

Existing callers are checking for MAP_FAILED,
so we should return that on error.
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

currently acpi_memory_plug_cb() sets is_inserting for
cold- and hot-plugged DIMMs as result ASL MHPD.MSCN()
method issues device check even for every coldplugged
DIMM. There isn't much harm in it but if we try to
unplug such DIMM, OSPM will issue device check
intstead of device eject event. So OSPM won't eject
memory module as expected and it will try to eject it
only when another memory device is hot-(un)plugged.

As a fix do not set 'is_inserting' event and do not
issue SCI for cold-plugged DIMMs as they are
enumerated and activated by OSPM during guest's boot.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Build on RHEL6 fails:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42875

Apparently unnamed unions couldn't use C99  named field initializers.
Let's just name the payload union field.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We are sending msg fields, use sizeof on these
and not on local variables which happen to
have a matching type.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We are using local msg structures everywhere, use them
for sizeof as well.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Breakpoint fixes

# gpg: Signature made Wed 28 Oct 2015 17:58:52 GMT using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20151028:
  target-*: Advance pc after recognizing a breakpoint
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some targets already had this within their logic, but make sure
it's present for all targets.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

target-i386: finally enable "check" mode by default

# gpg: Signature made Wed 28 Oct 2015 14:13:10 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: Enable "check" mode by default
  target-i386: Don't left shift negative constant
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images

# gpg: Signature made Wed 28 Oct 2015 00:02:46 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-openbios-signed:
  Update OpenBIOS images
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update OpenBIOS images to SVN r1353 built from submodule.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Current default behavior of QEMU is to silently disable features that
are not supported by the host when a CPU model is requested in the
command-line. This means that in addition to risking breaking guest ABI
by default, we are silent about it.

I would like to enable "enforce" by default, but this can easily break
existing production systems because of the way libvirt makes assumptions
about CPU models today (this will change in the future, once QEMU
provide a proper interface for checking if a CPU model is runnable).

But there's no reason we should be silent about it. So, change
target-i386 to enable "check" mode by default so at least we have some
warning printed to stderr (and hopefully logged somewhere) when QEMU
disables a feature that is not supported by the host system.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Left shift of negative values is undefined behavior. Detected by clang:
  qemu/target-i386/translate.c:2423:26: runtime error:
    left shift of negative value -8

This changes the code to reverse the sign after the left shift.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

target-arm queue:
 * more EL2 preparation: handling for stage 2 translations
 * standardize debug macros in i.MX devices
 * improve error message in a corner case for virt board
 * disable live migration of KVM GIC if the kernel can't handle it
 * add SPSR_(ABT|UND|IRQ|FIQ) registers
 * handle non-executable page-straddling Thumb instructions
 * fix a "no 64-bit EL2" assumption in arm_excp_unmasked()

# gpg: Signature made Tue 27 Oct 2015 16:03:31 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20151027-1: (27 commits)
  target-arm: Add support for S1 + S2 MMU translations
  target-arm: Route S2 MMU faults to EL2
  target-arm: Add S2 translation to 32bit S1 PTWs
  target-arm: Add S2 translation to 64bit S1 PTWs
  target-arm: Add ARMMMUFaultInfo
  target-arm: Avoid inline for get_phys_addr
  target-arm: Add support for S2 page-table protection bits
  target-arm: Add computation of starting level for S2 PTW
  target-arm: lpae: Rename granule_sz to stride
  target-arm: lpae: Replace tsz with computed inputsize
  target-arm: Add support for AArch32 S2 negative t0sz
  target-arm: lpae: Move declaration of t0sz and t1sz
  target-arm: lpae: Make t0sz and t1sz signed integers
  target-arm: Add HPFAR_EL2
  i.MX: Standardize i.MX GPT debug
  i.MX: Standardize i.MX EPIT debug
  i.MX: Standardize i.MX FEC debug
  i.MX: Standardize i.MX CCM debug
  i.MX: Standardize i.MX AVIC debug
  i.MX: Standardize i.MX I2C debug
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-15-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-14-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for applying S2 translation to 32bit S1
page-table walks.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-13-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for applying S2 translation to 64bit S1
page-table walks.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-12-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Introduce ARMMMUFaultInfo to propagate MMU Fault information
across the MMU translation code path. This is in preparation for
adding Stage-2 translation.

No functional changes.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-11-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Avoid inline for get_phys_addr() to prepare for future recursive use.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-10-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-9-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The starting level for S2 pagetable walks is computed
differently from the S1 starting level. Implement the S2
variant.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-8-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename granule_sz to stride to better match the reference manuals.

No functional change.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove the tsz variable and introduce inputsize.
This simplifies the code a little and makes it easier to
compare with the reference manuals.

No functional change.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for AArch32 S2 negative t0sz. In preparation for
using 40bit IPAs on AArch32.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1445864527-14520-5-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>