- 07 2月, 2011 1 次提交
-
-
由 Marcelo Tosatti 提交于
The host part of a block device can be deleted with in progress block migration. To fix this, add a reference count to DriveInfo, freeing resources on last reference. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 31 1月, 2011 10 次提交
-
-
由 Markus Armbruster 提交于
Watch this: (qemu) drive_add 0 if=none (qemu) info block none0: type=hd removable=0 [not inserted] (qemu) drive_del none0 Segmentation fault (core dumped) add_init_drive() is confused about drive_init()'s failure modes, and cleans up when it shouldn't. This leaves the DriveInfo with member opts dangling. drive_del attempts to free it, and dies. drive_init() behaves as follows: * If it created a drive with media, it returns its DriveInfo. * If it created a drive without media, it clears *fatal_error and returns NULL. * If it couldn't create a drive, it sets *fatal_error and returns NULL. Of its three callers: * drive_init_func() is correct. * usb_msd_init() assumes drive_init() failed when it returns NULL. This is correct only because it always passes option "file", and "drive without media" can't happen then. * add_init_drive() assumes drive_init() failed when it returns NULL. This is incorrect. Clean up drive_init() to return NULL on failure and only on failure. Drop its parameter fatal_error. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Let the callers build the optstr. Only one wants to. All the others become simpler, because they don't have to worry about escaping '%'. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
We silently ignore multiple definitions for the same drive: $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=ide,index=1,file=tmp.qcow2 -drive if=ide,index=1,file=nonexistant QEMU 0.13.50 monitor - type 'help' for more information (qemu) info block ide0-hd1: type=hd removable=0 file=tmp.qcow2 backing_file=tmp.img ro=0 drv=qcow2 encrypted=0 With if=none, this can become quite confusing: $ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=none,index=1,file=tmp.qcow2,id=eins -drive if=none,index=1,file=nonexistant,id=zwei -device ide-drive,drive=eins -device ide-drive,drive=zwei qemu-system-x86_64: -device ide-drive,drive=zwei: Property 'ide-drive.drive' can't find value 'zwei' The second -device fails, because it refers to drive zwei, which got silently ignored. Make multiple drive definitions fail cleanly. Unfortunately, there's code that relies on multiple drive definitions being silently ignored: main() merrily adds default drives even when the user already defined these drives. Fix that up. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Before, type & index were hidden in printf-like fmt, ... parameters, which get expanded into an option string. Rather inconvenient for uses later in this series. New IF_DEFAULT to ask for the machine's default interface. Before, that was done by having no option "if" in the option string. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Before commit 622b520f, index=12 meant bus=1,unit=5. Since the commit, it means bus=0,unit=12. The drive is created, but not the guest device. That's because the controllers we use with if=scsi drives (lsi53c895a and esp) support only 7 units, and scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers exceeding that limit. Changing the mapping of index to bus, unit is a regression. Breaking -drive invocations that used to work just makes it worse. Revert the part of commit 622b520f that causes this, and clean up some. Note that the fix only affects if=scsi. You can still put more than 7 units on a SCSI bus with -device & friends. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Turns drive_init()'s lengthy conditional into a concise loop, and makes the data available elsewhere. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
qdev_init_bdrv() doesn't belong into qdev.c; it's about drives, not qdevs. Rename to drive_get_next, move to blockdev.c, drop the bogus DeviceState argument, and return DriveInfo instead of BlockDriverState. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Christoph Hellwig 提交于
Add a monitor command that allows resizing of block devices while qemu is running. It uses the existing bdrv_truncate method already used by qemu-img to do it's work. Compared to qemu-img the size parsing is very simplicistic, but I think having a properly numering object is more useful for non-humand monitor users than having the units and relative resize parsing. For SCSI devices the new size can be updated in Linux guests by doing the following shell command: echo > /sys/class/scsi_device/0:0:0:0/device/rescan For ATA devices I don't know of a way to update the block device size in Linux system, and for virtio-blk the next two patches will provide an automatic update of the size when this command is issued on the host. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 24 1月, 2011 4 次提交
-
-
由 Markus Armbruster 提交于
Watch this: (qemu) drive_add 0 if=none,file=tmp.img OK (qemu) info block none0: type=hd removable=0 file=tmp.img ro=0 drv=raw encrypted=0 (qemu) drive_del none0 Segmentation fault (core dumped) do_drive_del()'s code to clean up the pointer from a qdev using the drive back to the drive needs to check whether such a device exists. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
This makes the errors point to the error location, and fixes drive_add to report errors in the monitor instead of stderr. While there, tweak a few error messages for consistency. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
When cyls, heads or secs are out of range, the error message prints buf, which points to the value of option "if". Bogus, may even be null. Drop that. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Jes Sorensen 提交于
Current code does not support snapshot internally to the running image. Error in case no snapshot_file is specified. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 17 12月, 2010 2 次提交
-
-
由 Jes Sorensen 提交于
The monitor command is: snapshot_blkdev <device> [snapshot-file] [format] Default format is qcow2. For now snapshots without a snapshot-file, eg internal snapshots, are not supported. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Ryan Harper 提交于
If a user decides to punish a guest by revoking its block device via drive_del, and subsequently also attempts to remove the pci device backing it, and the device is using blockdev_auto_del() then we get a segfault when we attempt to access dinfo->auto_del.[1] The fix is to check if drive_get_by_blockdev() actually returns a valid dinfo pointer or not. 1. (qemu) pci_add auto storage file=images/test01.raw,if=virtio,id=block1,snapshot=on (qemu) drive_del block1 (qemu) pci_del 5 *segfault* Signed-off-by: NRyan Harper <ryanh@us.ibm.com> Tested-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 25 11月, 2010 1 次提交
-
-
由 Ryan Harper 提交于
Currently device hotplug removal code is tied to device removal via ACPI. All pci devices that are removable via device_del() require the guest to respond to the request. In some cases the guest may not respond leaving the device still accessible to the guest. The management layer doesn't currently have a reliable way to revoke access to host resource in the presence of an uncooperative guest. This patch implements a new monitor command, drive_del, which provides an explicit command to revoke access to a host block device. drive_del first quiesces the block device (qemu_aio_flush; bdrv_flush() and bdrv_close()). This prevents further IO from being submitted against the host device. Finally, drive_del cleans up pointers between the drive object (host resource) and the device object (guest resource). Signed-off-by: NRyan Harper <ryanh@us.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 04 11月, 2010 1 次提交
-
-
由 Kevin Wolf 提交于
This implements the rerror option for SCSI disks. It also includes minor changes to the write path where the same code is used that was criticized in the review for the changes to the read path required for rerror support. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 23 8月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 26 7月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Block device change command did not copy BDRV_O_SNAPSHOT flag. Thus the new image did not have this flag and the file got deleted during opening. Fix by copying BDRV_O_SNAPSHOT flag. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 06 7月, 2010 1 次提交
-
-
由 Markus Armbruster 提交于
Since commit cb4e5f8e, monitor command change makes the new media readonly iff the type hint is BDRV_TYPE_CDROM, i.e. the drive was created with media=cdrom. The intention is to avoid changing a block device's read-only-ness. However, BDRV_TYPE_CDROM is only a hint. It is currently sufficent for read-only. But it's not necessary, and it may not remain sufficient. Use bdrv_is_read_only() instead. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 02 7月, 2010 5 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
We automatically delete blockdev host parts on unplug of the guest device. Too much magic, but we can't change that now. The delete happens early in the guest device teardown, before the connection to the host part is severed. Thus, the guest part's pointer to the host part dangles for a brief time. No actual harm comes from this, but we'll catch such dangling pointers a few commits down the road. Clean up the dangling pointers by delaying the automatic deletion until the guest part's pointer is gone. Device usb-storage deliberately makes two qdev properties refer to the same drive, because it automatically creates a second device. Again, too much magic we can't change now. Multiple references worked okay before, but now free_drive() dies for the second one. Zap the extra reference. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Unused since commit 6ced55a5. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Luiz Capitulino 提交于
Historically, user monitor arguments beginning with '-' (eg. '-f') were passed as integers down to handlers. I've maintained this behavior in the new monitor because we didn't have a boolean type at the very beginning of QMP. Today we have it and this behavior is causing trouble to QMP's argument checker. This commit fixes the problem by doing the following changes: 1. User Monitor Before: the optional arg was represented as a QInt, we'd pass 1 down to handlers if the user specified the argument or 0 otherwise This commit: the optional arg is represented as a QBool, we pass true down to handlers if the user specified the argument, otherwise _nothing_ is passed 2. QMP Before: the client was required to pass the arg as QBool, but we'd convert it to QInt internally. If the argument wasn't passed, we'd pass 0 down This commit: still require a QBool, but doesn't do any conversion and doesn't pass any default value 3. Convert existing handlers (do_eject()/do_migrate()) to the new way Before: Both handlers would expect a QInt value, either 0 or 1 This commit: Change the handlers to accept a QBool, they handle the following cases: A) true is passed: the option is enabled B) false is passed: the option is disabled C) nothing is passed: option not specified, use default behavior Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 22 6月, 2010 1 次提交
-
-
由 Eduardo Habkost 提交于
This changes the monitor eject_device() function to not check for bdrv_is_inserted(). Example run where the bug manifests itself: (output of 'info block' is stripped to include only the CD-ROM device) (qemu) info block ide1-cd0: type=cdrom removable=1 locked=0 [not inserted] (qemu) change ide1-cd0 /dev/cdrom host_cdrom (qemu) info block ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0 (qemu) eject ide1-cd0 (qemu) info block ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0 # at this point, a disk was inserted on the host CD-ROM drive (qemu) info block ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0 (qemu) eject ide1-cd0 (qemu) info block ide1-cd0: type=cdrom removable=1 locked=0 [not inserted] (qemu) The first eject command didn't work because the is_inserted() check failed. I have no clue why the code had the is_inserted() check, as it doesn't matter if there is a disk present at the host drive, when the user wants the virtual device to be disconnected from the host device. The is_inserted() check has another side effect: a memory leak if the "change" command is used multiple times, as do_change() calls eject_device() before re-opening the block device, but bdrv_close() is never called. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 15 6月, 2010 5 次提交
-
-
由 Markus Armbruster 提交于
This is the list of drives defined with drive_init(). Hide it, so it doesn't get abused. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
do_commit() and mux_proc_byte() iterate over the list of drives defined with drive_init(). This misses host block devices defined by other means. Such means don't exist now, but will be introduced later in this series. Change them to use new bdrv_commit_all(), which iterates over all host block devices. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
That's where they belong semantically (block device host part), even though the actions are actually executed by guest device code. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Empty file used to create an empty drive (no media). Since commit 9dfd7c7a, it's an error: "qemu: could not open disk image : No such file or directory". Older versions of libvirt can choke on this. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 04 6月, 2010 2 次提交
-
-
由 Luiz Capitulino 提交于
We should use 'dinfo->serial' length, 'serial' is a pointer, so the serial number length is currently limited to the pointer size. This fixes https://bugs.launchpad.net/qemu/+bug/584143 and is also valid for stable. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-