Use a subsection, so that migration to older version still works,
provided the tray is closed and unlocked.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Don't fail when tray is already open.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive
already has the requested state.  cmd_start_stop_unit() fails when
asked to eject while the tray is open and locked.  Fix that.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fix leak of s->snap in failure path.  Simplify error paths for the whole
function.
Reported-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

No assignment in condition.  Remove duplicate ret > 0 check.
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow the client id to be specified in the config string via 'id=' so that
users can control who they authenticate as.  Currently they are stuck with
the default ('admin').  This is necessary for anyone using authentication
in their environment.
Signed-off-by: NSage Weil <sage@newdream.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

While there, make the locked parameter bool.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Requires new BlockDevOps member is_medium_locked().  Implement for IDE
and SCSI CD-ROMs.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The device model knows best when to accept the guest's eject command.
No need to detour through the block layer.

bdrv_eject() can't fail anymore.  Make it void.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState.  Just like tray open/close
state, we should track it in the device models instead, because it's
device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState.  Just like tray open/close
state, we should track it in the device models instead, because it's
device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 4be9762a is now completely redone.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is
open.  Unfortunately, there are two different kinds of users, with
conflicting needs.

1. Device models using bdrv_eject(), currently ide-cd and scsi-cd.
They expect bdrv_is_inserted() to reflect the tray status.  Commit
4be9762a makes them happy.

2. Code that wants to know whether a BlockDriverState has media, such
as find_image_format(), bdrv_flush_all().  Commit 4be9762a makes them
unhappy.  In particular, it breaks flush on VM stop for media ejected
by the guest.

Revert the change to bdrv_is_inserted().  Check the tray status in the
device models instead.

Note on IDE: Since only ATAPI devices have a tray, and they don't
accept ATA commands since the recent commit "ide: Reject ATA commands
specific to drive kinds", checking in atapi.c suffices.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState since commit 4be9762a.  As
discussed in that commit's message, we should track it in the device
device models instead, because it's device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We already track it in BlockDriverState since commit 4be9762a.  As
discussed in that commit's message, we should track it in the device
device models instead, because it's device state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

"eject" is misleading; it means "eject" when start is clear, but
"load" when start is set.  Rename to loej, because that's how MMC-5
calls it, in section 6.40.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

ACS-2 Table B.2 explicitly prohibits ATAPI devices from implementing
WIN_RECAL, WIN_READ_EXT, WIN_READDMA_EXT, WIN_READ_NATIVE_MAX,
WIN_MULTREAD_EXT, WIN_WRITE, WIN_WRITE_ONCE, WIN_WRITE_EXT,
WIN_WRITEDMA_EXT, WIN_MULTWRITE_EXT, WIN_WRITE_VERIFY, WIN_VERIFY,
WIN_VERIFY_ONCE, WIN_VERIFY_EXT, WIN_SPECIFY, WIN_MULTREAD,
WIN_MULTWRITE, WIN_SETMULT, WIN_READDMA, WIN_READDMA_ONCE,
WIN_WRITEDMA, WIN_WRITEDMA_ONCE, WIN_FLUSH_CACHE_EXT.  Restrict them
to IDE_HD and IDE_CFATA.

Same for CFA_WRITE_SECT_WO_ERASE, CFA_WRITE_MULTI_WO_ERASE.  Restrict
them to IDE_CFATA, like the other CFA_ commands.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

No functional change.

It would be nice to have handler functions in the table, like commit
e1a064f9 did for ATAPI.  Left for another day.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Must set the ATAPI device signature, see ATA4 8.27.5.2 Outputs for
PACKET Command feature set devices, and ACS-2 7.36.6 Outputs for
PACKET feature set devices.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Gdb expects all registers windows to be flushed in ram, which is not the case
in Qemu. Therefore the back-trace generation doesn't work. This patch adds a
function to handle reads (and only read) in stack frames as if windows were
flushed.
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add myself as target-xtensa and DC232B maintainer.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This is Diamond 232L Standard Core Rev.B (LE).
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.3.9
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- TLB opcode group;
- region protection option (ISA, 4.6.3);
- region translation option (ISA, 4.6.4);
- MMU option (ISA, 4.6.5).

Cache control attribute bits are not used by this implementation.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Specific xtensa processor overlay for GDB contains register map in
the gdb/xtensa-config.c. This description is used by the GDB to e.g.
parse 'g' response packets and it may be reused in the qemu's gdbstub
(only XTREG definitions for non-pseudoregisters are needed).

Currently mainline GDB does not support operations with privileged SRs
(see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support
may be enabled, see NUM_CORE_REGS comment in the gdbstub.c
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.4.3 for details.

Vector addresses recorded in core configuration are absolute values that
correspond to default VECBASE value.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.7.1.3 for details.

Window check is inserted before commands that push "used register
watermark" beyond its current level. Used register watermark is reset on
instructions that change WINDOW_BASE/WINDOW_START SRs.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.4.6 (interrupt option), 4.4.7 (high priority interrupt
option) and 4.4.8 (timer interrupt option) for details.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.

Note that simcalls that accept buffer addresses expect virtual addresses.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.4.4 for details.

Correct (aligned as per ISA) address for unaligned access is generated
in case this option is not enabled.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.3.3 for details.

TB flag XTENSA_TBFLAG_LITBASE is used to track enable bit of LITBASE SR.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.3.2 for details.

Operations that change LEND SR value invalidate TBs at the old and at
the new LEND. LEND value at TB compilation time is considered constant
and loop instruction is generated based on this value.

Invalidation may be avoided for the TB at the old LEND address, since
looping code verifies actual LEND value.

Invalidation may be avoided for the TB at the new LEND address if
there's a way to associate LEND address with TB at compilation time and
later verify that it doesn't change.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

See ISA, 4.7.1 for details.

Physical registers and currently visible window are separate fields in
CPUEnv. Only current window is accessible to TCG. On operations that
change window base helpers copy current window to and from physical
registers.

Window overflow check described in 4.7.1.3 is in separate patch.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

- mark privileged opcodes with ring check;
- make debug exception on exception handler entry.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>