- 28 4月, 2015 2 次提交
-
-
由 Shannon Zhao 提交于
So far virtio-scsi-device can't expose host features to guest while using virtio-mmio because it doesn't set DEFINE_VIRTIO_SCSI_FEATURES on backend or transport. The host features belong to the backends while virtio-scsi-pci, virtio-scsi-s390 and virtio-scsi-ccw set the DEFINE_VIRTIO_SCSI_FEATURES on transports. But they already have the ability to forward property accesses to the backend child. So if we move the host features to backends, it doesn't break the backwards compatibility for them and make host features work while using virtio-mmio. Move DEFINE_VIRTIO_SCSI_FEATURES to the backend virtio-scsi. The transports just sync the host features from backends. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Shannon Zhao 提交于
So far virtio-net-device can't expose host features to guest while using virtio-mmio because it doesn't set DEFINE_VIRTIO_NET_FEATURES on backend or transport. So the performance is low. The host features belong to the backend while virtio-net-pci, virtio-net-s390 and virtio-net-ccw set the DEFINE_VIRTIO_NET_FEATURES on transports. But they already have the ability to forward property accesses to the backend child. So if we move the host features to backends, it doesn't break the backwards compatibility for them and make host features work while using virtio-mmio. Here we move DEFINE_VIRTIO_NET_FEATURES to the backend virtio-net. The transports just sync the host features from backend. Meanwhile move virtio_net_set_config_size to virtio-net to make sure the config size is correct and don't expose it. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 16 3月, 2015 1 次提交
-
-
由 Thomas Huth 提交于
The function s390_virtio_bus_console() is completely unused and thus can be removed safely. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1426164834-38648-5-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
- 10 3月, 2015 2 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <1425045337-20138-3-git-send-email-armbru@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <1425045337-20138-2-git-send-email-armbru@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 30 10月, 2014 1 次提交
-
-
由 Paolo Bonzini 提交于
The virtio-rng backend is currently linked twice, once in the proxy device (e.g. virtio-rng-pci) and once in virtio-rng-device. This causes a double unref of the backend when the parent device is unplugged. To fix this, make the proxy device use an alias, similar to what is already being done for the iothread link. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NGonglei <arei.gonglei@huawei.com> Message-id: 1414577839-18695-1-git-send-email-pbonzini@redhat.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 20 10月, 2014 1 次提交
-
-
由 Markus Armbruster 提交于
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 15 10月, 2014 3 次提交
-
-
由 Gonglei 提交于
Since the "bootindex" property is a QOM property and not a qdev property now, we must alias it explicitly for virtio-blk-pci, as well as CCW and s390-virtio. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gonglei 提交于
Since the "bootindex" property is a QOM property and not a qdev property now, we must alias it explicitly for virtio-net-pci, as well as CCW and s390-virtio. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Igor Mammedov 提交于
Beside of conversion, patch drops present unplug handling, effectively disabling hot-unplug of s390-virtio devices. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 30 9月, 2014 9 次提交
-
-
由 Gonglei 提交于
For better code sharing, add a helper function that handles reference counting of the virtio backend for virtio proxy devices. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NGonglei <arei.gonglei@huawei.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-rng child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
virtio-rng-{pci, s390, ccw} all duplicate the qdev properties of their VirtIORNG child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIORNG child. This way no duplication is necessary. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-serial child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
virtio-serial-{pci, s390, ccw} all duplicate the qdev properties of their VirtIOSerial child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIOSerial child. This way no duplication is necessary. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-scsi/vhost-scsi child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
{virtio, vhost}-scsi-{pci, s390, ccw} all duplicate the qdev properties of their VirtIOSCSI/VHostSCSI child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIOSCSI/VHostSCSI child. This way no duplication is necessary. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-net child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Gonglei 提交于
virtio-net-pci, virtio-net-s390, and virtio-net-ccw all duplicate the qdev properties of their VirtIONet child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIONet child. This way no duplication is necessary. Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 06 7月, 2014 1 次提交
-
-
由 Ming Lei 提交于
The two common virtio features can be defined per bus, so move all into bus class device to make code more clean. As discussed with cornelia, s390-virtio-blk doesn't support the two features at all, so keep s390-virtio as it. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> #for s390 ccw Suggested-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NMing Lei <ming.lei@canonical.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> MST: rebase and resolve conflicts
-
- 01 7月, 2014 3 次提交
-
-
由 Stefan Hajnoczi 提交于
Up until now -device virtio-blk-pci,x-iothread=<id> was used to assign an IOThread. This was a temporary solution while we cleaned up QOM link properties. This patch switches over to a QOM link property since it is now possible to restrict the setter to unrealized instances and automatically unref the IOThread when the virtio-blk-pci device is freed. Since the "iothread" property is a QOM property and not a qdev property, we must alias it explicitly for virtio-blk-pci, as well as CCW and s390-virtio. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Hajnoczi 提交于
object_initialize() leaves the object with a refcount of 1. object_property_add_child() adds its own reference which is dropped again when the property is deleted. The upshot of this is that we always have a refcount >= 1. Upon hot unplug the virtio-blk child is not finalized! Drop our reference after the child property has been added to the parent. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
由 Stefan Hajnoczi 提交于
virtio-blk-pci, virtio-blk-s390, and virtio-blk-ccw all duplicate the qdev properties of their VirtIOBlock child. This approach does not work well with string or pointer properties since we must be careful about leaking or double-freeing them. Use the QOM alias property to forward property accesses to the VirtIOBlock child. This way no duplication is necessary. Remember to stop calling virtio_blk_set_conf() so that we don't clobber the values already set on the VirtIOBlock instance. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
-
- 10 6月, 2014 2 次提交
-
-
由 Cornelia Huck 提交于
Remove the need for a cpu to inject a floating interrupt on kvm. Acked-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Cornelia Huck 提交于
Move the injection code for all floating interrupts to interrupt.c and add a comment. Also get rid of the #ifdef CONFIG_KVM for the service interrupt. Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
- 20 3月, 2014 2 次提交
-
-
由 Stefan Hajnoczi 提交于
There are currently three types of object_property_add_link() callers: 1. The link property may be set at any time. 2. The link property of a DeviceState instance may only be set before realize. 3. The link property may never be set, it is read-only. Something similar can already be achieved with object_property_add_str()'s set() argument. Follow its example and add a check() argument to object_property_add_link(). Also provide default check() functions for case #1 and #2. Case #3 is covered by passing a NULL function pointer. Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> [AF: Tweaked documentation comment] Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Stefan Hajnoczi 提交于
Some object_property_add_link() callers expect property deletion to unref the link property object. Other callers expect to manage the refcount themselves. The former are currently broken and therefore leak the link property object. This patch adds a flags argument to object_property_add_link() so the caller can specify which refcount behavior they require. The new OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be unreferenced when the property is deleted. This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c, s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c. Rationale for refcount behavior: * hw/core/qdev.c - bus children are explicitly unreferenced, don't interfere - parent_bus is essentially a read-only property that doesn't hold a refcount, don't unref - hotplug_handler is leaked, do unref * hw/dma/xilinx_axidma.c - rx stream "dma" links are set using set_link, therefore they need unref - tx streams are set using set_link, therefore they need unref * hw/net/xilinx_axienet.c - same reasoning as hw/dma/xilinx_axidma.c * hw/pcmcia/pxa2xx.c - pxa2xx bypasses set_link and therefore does not use refcounts * hw/s390x/s390-virtio-bus.c * hw/virtio/virtio-pci.c * hw/virtio/virtio-rng.c * ui/console.c - set_link is used and there is no explicit unref, do unref Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 11 2月, 2014 6 次提交
-
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
由 Edgar E. Iglesias 提交于
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
-
- 23 12月, 2013 2 次提交
-
-
由 Markus Armbruster 提交于
device_add plugs devices into suitable bus. For "real" buses, that actually connects the device. For sysbus, the connections need to be made separately, and device_add can't do that. The device would be left unconnected, and could not possibly work. Quite a few, but not all sysbus devices already set cannot_instantiate_with_device_add_yet in their class init function. Set it in their abstract base's class init function sysbus_device_class_init(), and remove the now redundant assignments from device class init functions. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Markus Armbruster 提交于
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash. To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dade. The device model is still omitted from help, but is available anyway. Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse. This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool. Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use. With that done, the regression fix is hopefully acceptable. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 31 8月, 2013 4 次提交
-
-
由 Andreas Färber 提交于
To be passed on to object_initialize_with_type(). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw) Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
To be passed to object_initialize(). Since commit 39355c38 the argument is void*, so drop some superfluous (BusState *) casts or direct parent field usages. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
To be passed to qbus_create_inplace(). Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Peter Maydell 提交于
There's no need to cast the first argument of object_initialize() to Object. Remove these unnecessary casts. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 30 7月, 2013 1 次提交
-
-
由 Peter Maydell 提交于
'dprintf' is the name of a POSIX standard function so we should not be stealing it for our debug macro. Rename to 'DPRINTF' (in line with a number of other source files.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAndreas Färber <afaerber@suse.de> Reviewed-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Acked-by: NRichard Henderson <rth@twiddle.net> Acked-by: NKevin Wolf <kwolf@redhat.com> Message-id: 1375100199-13934-3-git-send-email-peter.maydell@linaro.org Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-