Now that clock_value is only used in one place, we can inline it in
the STCK helper.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch introduces defines for the SIGP condition codes and replaces all
occurrences of numeral condition codes with the new defines.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1424783731-43426-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

To support dynamically updating the IPL device from inside the KVM
guest on the s390 platform, DIAG 308 instruction is intercepted
in QEMU to handle the request.

Subcode 5 allows to specify a new boot device, which is saved for
later in the s390_ipl device. This also allows to switch from an
external kernel to a boot device.

Subcode 6 retrieves boot device configuration that has been previously
set.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NFan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Currently, load_normal_reset() and modified_clear_reset() as triggered
by a guest vcpu will initiate cpu resets on the current vcpu thread for
all cpus. The reset should happen on the individual vcpu thread
instead, so let's use run_on_cpu() for this.

This avoids calls to synchronize_rcu() in the kernel.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Remove the need for a cpu to inject a floating interrupt on kvm.
Acked-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Exploit the new api for userspace-controlled cmma. If supported, enable
cmma during kvm initialization and register a reset handler for cmma,
which is also called directly from the load IPL code.

The reset functionality is needed to reset the cmma state of the guest
pages, e.g. if a system reset is triggered via qemu monitor; otherwise
this could result in data corruption.

A guest triggered reboot may now lead to multiple cmma resets; this is
OK, however, as this is slowpath anyway and the simplest way to achieve
the intended effects.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This will collect all load and store helpers soon.  For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h.  This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

These functions don't need type casts (as does cpu_physical_memory_rw)
and also make the code better readable.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

This lets us drop some local variables in tlb_fill() functions.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Move conversion tables to header file.
   - In SCLP line mode processing EBCDIC/ASCII conversion is needed.
   - An additional EBCDIC to ASCII conversion function is added.
Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch implements subcode 0 of diag 308. This is necessary for kexec
(without kdump). The main difference to subcode 1 is that all CPUs get
a full reset, instead of the architectured CPU reset (which leaves all
registers untouched).
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand
macros.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

kdump on s390 uses a load normal reset to bring the system in a defined
state by doing a subsystem reset. The issuing CPUs will have an initial
CPU reset, all other CPUs will have a CPU reset as defined in POP (no
register content will change).

Implement this as architectured.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Linux uses a check for subcode 6 to decide if other subcodes are
available. Provide a minimal implementation for subcode 6, as well
as for subcode 5.
Signed-off-by: NEugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[Move code from kvm.c into misc_helper.c]

This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The function is only used in misc_helper.c, so move it to that file.

This reduces the size of debug executables (compiled without optimization)
because they get unused code and data for each compilation which includes
cpu.h.

Executables with optimization don't change their size.

ebcdic2ascii is currently unused and could be removed (not done here).

The array ascii2ebcdic must be accessed with an unsigned index, therefore
(int)ascii[i] was replaced by (uint8_t)ascii[i]. The old code would have
failed for a signed char less than 0. The current code only converts
"QEMU" and spaces to EBCDIC, so there is no problem today.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Make the user path more like the system path.  Prepare for more kinds
of runtime exceptions.  Rename ILC to ILEN to make it clear that we
want to pass around a full instruction length, rather than a "code"
that happens to be stored one bit left in a larger field.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Adapt helper functions to pass X86CPU / PowerPCCPU / S390CPU.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds a more generic infrastructure for handling Service-Call
requests on s390. Currently we only support a small subset of Read
SCP Info directly in target-s390x. This patch provides the base
infrastructure for supporting more commands and moves Read SCP
Info.
In the future we could add additional commands for hotplug, call
home and event handling.
Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>