Also this patch adds initial support for Canon
PowerShot A1100 IS compact camera.
Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Message-id: 1387188908-754-3-git-send-email-antonynpavlov@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.

There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.
Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds support for C3.4.4 Logical (immediate),
which include AND, ANDS, ORR, EOR.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, function renaming,
          removed a TCG temp variable]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
[PMM: cleaned up some unnecessary code in logic_imm_decode_wmask
and added clarifying commentary on what it's actually doing.
Dropped an ext32u that's not needed if we've just done an AND.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

this patch adds support for the CLS instruction.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

this patch introduces wrappers for the clrsb builtins,
which count the leading redundant sign bits.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch implements the C3.4.2 Bitfield instructions:
SBFM, BFM, UBFM.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds support for C5.6.149 REV, C5.6.151 REV32, C5.6.150 REV16.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds support for the C5.6.147 RBIT instruction.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, use bswap64,
          make RBIT part standalone from the rest of the patch,
	  splitting REV into a separate patch]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds support for decoding 1-src data processing insns,
and the first user, C5.6.40 CLZ (count leading zeroes).
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This adds 2-src variable shift register instructions:
C5.6.115 LSLV, C5.6.118 LSRV, C5.6.17 ASRV, C5.6.154 RORV
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder, use enums for shift types]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds support for decoding 2-src data processing insns,
and the first users, UDIV and SDIV.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder adding the 2-src decoding level,
          always zero-extend result in 32bit mode]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation support for the EXTR instruction.
Signed-off-by: NAlexander Graf <agraf@suse.de>

[claudio: adapted for new decoder, removed a few temporaries,
          fixed the 32bit bug, added checks for more
          unallocated cases]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add support for the instructions described in
"C3.4.6 PC-rel. addressing" (ADR and ADRP).
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for the instructions described in "C3.5.10 Logical
(shifted register)".

We store the flags in the same locations as the 32 bit decoder.
This is slightly awkward when calculating 64 bit results, but seems
a better tradeoff than having to rework the whole 32 bit decoder
and also make 32 bit result calculation in A64 awkward.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: some refactoring to avoid hidden allocation of temps,
	  rework flags, use enums for shift types,
	  renaming of functions]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
[PMM: Use TCG's andc/orc/eqv ops rather than manually inverting]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds support for the instruction group "C3.5.6
Conditional select": CSEL, CSINC, CSINV, CSNEG.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
[PMM: Improved code generated in the nomatch case as per RTH suggestions]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the compare and branch insns,
CBZ and CBNZ.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder,
          compare with immediate 0,
	  introduce read_cpu_reg to get the 0 extension on (!sf)]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the test and branch insns,
TBZ and TBNZ.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio:
  adapted for new decoder
  always compare with 0
  remove a TCG temporary
]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

This patch adds emulation for the conditional branch (b.cond) instruction.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: adapted to new decoder structure,
          reused arm infrastructure for checking the flags]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement BR, BLR and RET. This is all of the 'unconditional
branch (register)' instruction category except for ERET
and DPRS (which are system mode only).
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: reimplemented on top of new decoder structure]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Implement the B and BL instructions (PC relative branches and calls).

For convenience in managing TCG temporaries which might be generated
if a source register is the zero-register XZR, we provide a simple
mechanism for creating a new temp which is automatically freed at the
end of decode of the instruction.
Signed-off-by: NAlexander Graf <agraf@suse.de>
[claudio: renamed functions, adapted to new decoder layout]
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Decode the various kinds of system instructions:
 hints (HINT), which include NOP, YIELD, WFE, WFI, SEV, SEL
 sync instructions, which include CLREX, DSB, DMB, ISB
 msr_i, which move immediate to processor state field
 sys, which include all SYS and SYSL instructions
 msr, which move from a gp register to a system register
 mrs, which move from a system register to a gp register

Provide implementations where they are trivial nops.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Provide a skeleton for a64 instruction decoding in translate-a64.c,
by dividing instructions into the classes defined by the
ARM Architecture Reference Manual(DDI0487A_a) section C3.
Signed-off-by: NClaudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

We will need helpers that only make sense with AArch64. Add
helper-a64.{c,h} files as stubs that we can fill with these
helpers in the following patches.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The information which AArch32 holds in the FPSCR is split for
AArch64 into two logically distinct registers, FPSR and FPCR.
Since they are carefully arranged to use non-overlapping bits,
we leave the underlying state in the same place, and provide
accessor functions which just update the appropriate bits
via vfp_get_fpscr() and vfp_set_fpscr().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

When executing translation blocks we need to be able to recover
our program counter. Add a method to set it for AArch64 CPUs.
This covers user-mode, but for system mode emulation we will
need to check if the CPU is in an AArch32 execution state.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

The A32/T32 gen_intermediate_code_internal() is complicated because it
has to deal with:
 * conditionally executed instructions
 * Thumb IT blocks
 * kernel helper page
 * M profile exception-exit special casing

None of these apply to A64, so putting the "this is A64 so
call the A64 decoder" check in the middle of the A32/T32
loop is confusing and means the A64 decoder's handling of
things like conditional jump and singlestepping has to take
account of the conditional-execution jumps the main loop
might emit.

Refactor the code to give A64 its own gen_intermediate_code_internal
function instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Add a config for aarch64-softmmu; this enables building of this target.
The resulting executable doesn't know about any 64 bit CPUs, but all
the 32 bit CPUs and board models work.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-8-git-send-email-peter.maydell@linaro.org
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

This commit adds support for booting a single AArch64 CPU by setting
appropriate registers. The bootloader includes placeholders for Board-ID
that are used to implement uniform indexing across different bootloaders.
Signed-off-by: NMian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-7-git-send-email-peter.maydell@linaro.org
[PMM:
 * updated to use ARMInsnFixup style bootloader fragments
 * dropped virt.c additions
 * use runtime checks for "is this an AArch64 core" rather than ifdefs
 * drop some unnecessary setting of registers in reset hook
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

For AArch64 we will obviously require a different set of
primary and secondary boot loader code fragments. However currently
we hardcode the offsets into the loader code where we must write
the entrypoint and other data into arm_load_kernel(). This makes it
hard to substitute a different loader fragment, so switch to a more
flexible scheme where instead of a raw array of instructions we use
an array of (instruction, fixup-type) pairs that indicate which
words need special action or data written into them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-6-git-send-email-peter.maydell@linaro.org
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

Add the bare minimum set of functions needed for control of an
AArch64 KVM vcpu:
 * CPU initialization
 * minimal get/put register functions which only handle the
   basic state of the CPU
Signed-off-by: NMian M. Hamayun <m.hamayun@virtualopensystems.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-4-git-send-email-peter.maydell@linaro.org
[PMM: significantly overhauled; most notably:
 * code lives in kvm64.c rather than using #ifdefs
 * support '-cpu host' rather than implicitly using whatever the
   host's CPU is regardless of what the user requests
 * fix bug attempting to get/set nonexistent X[31]
 * fix bug writing 64 bit kernel pstate into uint32_t env field
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

The env->pstate field is a little odd since it doesn't strictly
speaking represent an architectural register. However it's convenient
for QEMU to use it to hold the various PSTATE architectural bits
in the same format the architecture specifies for SPSR registers
(since this is the same format the kernel uses for signal handlers
and the KVM register). Add some structure to how we deal with it:
 * document what env->pstate is
 * add some #defines for various bits in it
 * add helpers for reading/writing it taking account of caching
   of NZCV, and use them where appropriate
 * reset it on startup
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

Split ARM KVM support code which is 32 bit specific out into its
own file, which we only compile on 32 bit hosts. This will give
us a place to add the 64 bit support code without adding lots of
ifdefs to kvm.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>

If hivecs are being used on reset, the CPU should come out of reset at
the hivecs reset vector (0xFFFF0000)
Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 3afc69c4f58f60aa2bbee7b91574a4eb414b1c23.1387160489.git.peter.crosthwaite@xilinx.com
[ PC Changes:
 * Fixed Grammar error in commit message
 * Elaborated commit message.
]
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add an ARM CPU property for the reset value of hivecs as it is a
board/SoC configurable setting.

The existence of the property is conditional on the ARM CPU not being M
class.
Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b04216c6bda4bd163f44a55bba552d0e8267481f.1387160489.git.peter.crosthwaite@xilinx.com
[ PC Changes:
 * Elaborated commit message
 * refactored to use qdev_property_add_static
]
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

GIC_BASE_ADDR is not the base address of the GIC. Its clear from the
code that this is the base address of the MPCore. Rename to
MPCORE_PERIPHBASE accordingly.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 90798bd3507205c16238b8b19a1a58c5437cf7ca.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix the CBAR initialisation by using the newly defined static property.
Zynq will now correctly init the CBAR to the SCU base address.

Needed to boot Linux on the xilinx_zynq machine model.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 8db7d57ebe5418fed397fcc86ea719f98446c178.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

To allow the machine model to set device properties before CPU
realization.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: e57658b4506b26ab6b6fadbe6d7827f669f51895.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix the CBAR initialisation by using the newly defined static property.
CBAR is now set before realization, so the intended value is now
actually used.

So I have kind of tested this. I booted an ARM kernel on Highbank with
the stock Highbank DTB. It doesn't boot (and I will be doing something
wrong), but before this patch I got this:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /workspaces/pcrost/public/linux2.git/arch/arm/mm/ioremap.c:301 __arm_ioremap_pfn_caller+0x180/0x198()
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W 3.13.0-rc1-next-20131126-dirty #2
[<c0015164>] (unwind_backtrace) from [<c00118c0>] (show_stack+0x10/0x14)
[<c00118c0>] (show_stack) from [<c02bd5fc>] (dump_stack+0x78/0x90)
[<c02bd5fc>] (dump_stack) from [<c001f110>] (warn_slowpath_common+0x68/0x84)
[<c001f110>] (warn_slowpath_common) from [<c001f1f4>] (warn_slowpath_null+0x1c/0x24)
[<c001f1f4>] (warn_slowpath_null) from [<c0017c6c>] (__arm_ioremap_pfn_caller+0x180/0x198)
[<c0017c6c>] (__arm_ioremap_pfn_caller) from [<c0017cd8>] (__arm_ioremap_caller+0x54/0x5c)
[<c0017cd8>] (__arm_ioremap_caller) from [<c0017d10>] (__arm_ioremap+0x18/0x1c)
[<c0017d10>] (__arm_ioremap) from [<c03913c0>] (highbank_init_irq+0x34/0x8c)
[<c03913c0>] (highbank_init_irq) from [<c038c228>] (init_IRQ+0x28/0x2c)
[<c038c228>] (init_IRQ) from [<c03899ec>] (start_kernel+0x234/0x398)
[<c03899ec>] (start_kernel) from [<00008074>] (0x8074)
---[ end trace 3406ff24bd97382f ]---

Which disappears with this patch.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: fedec366aaa512d75093635f523d1dbcb3358361.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>