Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For all i, ports_map[i] is used in and only in the i-th iteration.
Replace the dynamic array by a scalar variable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch avoids handling write watchpoints on read-only memory access.
It also breaks the searching loop for watchpoint once the setup for
handling watchpoint later is done.
Signed-off-by: NJun Koi <junkoi2004@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

lsi_bad_phase has a bug in the choice of pmjad1/pmjad2.  This does
not matter with Linux guests because it uses just one routine for
both, but it breaks Windows 64-bit guests.  This is the text
from the spec:

   "[The PMJCTL] bit controls which decision mechanism is used
   when jumping on phase mismatch. When this bit is cleared the
   LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when
   the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2)
   when the WSR bit is set.  When this bit is set the LSI53C895A will
   use jump address one (PMJAD1) on data out (data out, command,
   message out) transfers and jump address two (PMJAD2) on data in
   (data in, status, message in) transfers."

Which means:

    CCNTL0.PMJCTL
        0              SCNTL2.WSR = 0             PMJAD1
        0              SCNTL2.WSR = 1             PMJAD2
        1                    out                  PMJAD1
        1                    in                   PMJAD2

In qemu, what you get instead is:

    CCNTL0.PMJCTL
        0                    out                  PMJAD1
        0                    in                   PMJAD2    <<<<<
        1                    out                  PMJAD1
        1                    in                   PMJAD1    <<<<<

Considering that qemu always has SCNTL2.WSR cleared, the two marked cases
(corresponding to phase mismatch on input) are always jumping to the
wrong PMJAD register.  The patch implements the correct semantics.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NHuacai Chen <zltjiangshi@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Original patch from Ulrich Hecht, further work from Alexander Graf
and Richard Henderson.

Cc: Ulrich Hecht <uli@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We need not reserve the register unless we're going to use it.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We can support it in KVM now. The 0xd leaf is queried from KVM.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Would use it later for XSAVE related CPUID.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

the meaning of vendor_override is actually the opposite of how it
is currently used :-(
Fix it to allow KVM to export the non-native CPUID vendor if
explicitly requested by the user.

The intended behavior is:
With TCG:
  - always inject the configured vendor (either hard-coded, in config
    files or via ",vendor=" commandline)
With KVM:
  - by default inject the host's vendor
  - if the user specifies ",vendor=" on the commandline, use this
    instead of the host's vendor
  - all pre-configured vendors (hard-coded, config file) are ignored
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Guest debugging under KVM is currently broken once io-threads are
enabled. Easily fixable by switching the fake on_vcpu to the real
run_on_cpu implementation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

mingw32 does not include function ffs.

Commit c6d29ad6 added a
declaration for ffs, but an implementation was missing.

For compilations with optimization, the compiler creates
inline code, so the implementation is not always needed.

Without optimization, linking fails without this patch.

v2: Use __builtin_ffs as suggested by Richard Henderson

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

mingw32 does not define EPROTONOSUPPORT (which is used by
migration.c and maybe future patches), so add a
definition which uses a supported errno value.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

libdis, libdis-user and qemu-options.def are generated
directories / files and should be ignored by git.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This fixes a regression of 0e26b7b8: Reset halted also on INIT.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The MASTER_DISABLE bit (aka mask-all) masks all the interrupts.

According to Sun-4M System Architecture
"The level–15 interrupt sources [...] are maskable with the Interrupt Target
Mask Register. While these interrupts are considered ’non–maskable’ within
the SPARC IU, a mask capability is provided to allow the boot firmware
to establish a basic environment before receiving any level–15 interrupts,
which are non–maskable within SPARC. A mask–all bit is provided to allow
disabling of all external interrupts during change of the CIT."
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Convert fw_cfg to qdev.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

System architecture dictates whether HAS_AUDIO is defined. It's then
useless to check for HAS_AUDIO in files which are only used on those
architectures which always have audio.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The comment suggests we're checking for the driver in the ready
state and bus master disabled, but the code is checking that it's
not in the ready state.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Found-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch uses mknod to create socket.

On Host/Fileserver:
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:57 asocket1

On Guest/Client:
srwxr-xr-x 1 guestuser guestuser 0 2010-05-11 12:57 asocket1
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.

On Host/Fileserver:
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:36 afifo
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:32 blkdev
-rw-------. 1 virfsuid virtfsgid 0 2010-05-11 09:33 chardev

On Guest/Client:
prw-r--r-- 1 guestuser guestuser 0 2010-05-11 12:36 afifo
brw-r--r-- 1 guestuser guestuser 0, 0 2010-05-11 12:32 blkdev
crw-r--r-- 1 guestuser guestuser 4, 5 2010-05-11 12:33 chardev

In the passthrough securit model, specifal files are directly created
on the fileserver. But the user credential
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Mapped mode stores extended attributes in the user space of the extended
attributes. Given that the user space extended attributes are available
to regular files only, special files are created as regular files on the
fileserver and appropriate mode bits are added to the extended attributes.
This method presents all special files and symlinks as regular files on the
fileserver while they are represented as special files on the guest mount.

Implemntation of symlink in mapped security model:

A regular file is created and the link target is written to it.
readlink() reads it back from the file.

On Guest/Client:
lrwxrwxrwx 1 root root 6 2010-05-11 12:20 asymlink -> afile

On Host/Fileserver:
-rw-------. 1 root root 6 2010-05-11 09:20 asymlink
afile

Under passthrough model, it just calls underlying symlink() readlink()
system calls are used.

Under both security models, client user credentials are changed
after the filesystem objec creation.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>