After receiving READ STATUS command all subsequent IO reads should return
the status register value until another command is issued.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Support NAND devices which are wider than 8 bits.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Add support for NAND devices of over 1Gb.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Pass the BlockDeviceState to the nand_init() function rather
than having it look it up via drive_get() itself.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Since lm832x has been qdev'ified, its users will generally
have a DeviceState pointer rather than an i2c_slave pointer,
so adjust lm832x_key_event's prototype to suit.

This allows the n810 (its only user) to actually pass a correct
pointer to it rather than NULL. The effect is that we no longer
segfault when a key is pressed.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Convert the OMAP GPIO module to qdev.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

The OMAP2430 has a fifth GPIO module which earlier OMAP2 models lack; add
the clock definition for it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Add helper function omap_l4_region_base() to return the base address
of a particular region of an L4 target agent.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

The breakage was introduced by the commit 13661089Signed-off-by: NTeLeMan <geleman@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows to specify -machine options without setting an explicit
machine type. We will pick the default machine in this case. Requesting
the list of available machines is still possible via '-machine ?' e.g.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's already allowed by the example; there are about 1800 instances in the
tree; and disallowing it would lead to

    if (a) {
        ...
    } else {
        if (b) {
            ...
        } else {
            if (c) {
                ...
            } else {
                if (d) {
                    ...
                } else {
                    ...
                }
            }
        }
    }

instead of

    if (a) {
        ...
    } else if (b) {
        ...
    } else if (c) {
        ...
    } else if (d) {
        ...
    } else {
        ...
    }

which is more readable.
Acked-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch fixes a compilation error in xen-mapcache.c .

/home/stefanb/qemu/qemu-git/xen-mapcache.c: In function ‘xen_ram_addr_from_mapcache’:
/home/stefanb/qemu/qemu-git/xen-mapcache.c:240:42: error: variable ‘pentry’ set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Multiboot images can specify a bss segment. The boot loader must clear
the memory of the bss and ensure that no modules or structures are
allocated inside it. Several fields are provided in the Multiboot
header that were previously not used properly. The header is now used
to determine how much data should be read from the image and how much
memory should be reserved to the bss segment.
Signed-off-by: NGöran Weinholt <goran@weinholt.se>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is required for building libcacard which doesn't itself require
zlib without bringing in this requirement to the build environment.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

    When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK
QEmu throws an error saying that we've run off the end, and leaves
itself in the wrong state.

    Tested on ARM Vexpress model.
Signed-off-by: NDr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is just code movement, and moving the fpu/ include path from
target-dependent to target-independent Make variables.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Most definitions in softfloat.h are really target-independent, but the
file is not because it includes definitions of the default NaN values.
Change those to variables to allow including softfloat.h from files that
are not compiled per-target.  By making them const, the compiler is
allowed to optimize them into softfloat functions that use them.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is not a CPU interface, and a configure test would not be too
precise.  So just add it to qemu-common.h.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

    Added options to let qemu transfer two configuration files to bios:
"bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command
    -boot splash=P,splash-time=T
P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit
is ms. With these two options, if user invoke qemu with menu=on option, then
a splash picture would be showed in a given time. For example:
    qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000
would make boot.bmp shown as a brand with 5 seconds in the booting up process.
This feature need the new seabios's support, which could be got from git.
Signed-off-by: NWayne Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow registering sysbus device memory using a MemoryRegion.  Once all users
are converted, sysbus_init_mmio() and sysbus_init_mmio_cb() will be removed.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow registering a BAR using a MemoryRegion.  Once all users are converted,
pci_register_bar() and pci_register_bar_simple() will be removed.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is now done sloppily, via get_system_memory().  Eventually callers
will be converted to stop using that.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While eventually this should come from the machine initialization function,
take a short cut to avoid converting all machines now.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The I/O port space is byte addressable, even for word and long accesses.

An example is the VMware svga card, which has long ports on offsets 0,
1, and 2.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allocate the root memory region and initialize it.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow changes to the memory hierarchy to be accumulated and
made visible all at once.  This reduces computational effort,
especially when an accelerator (e.g. kvm) is involved.

Useful when a single register update causes multiple changes
to an address space.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Instead of adding and deleting regions in one pass, do a delete
pass followed by an add pass.  This fixes the following case:

from:
  0x0000-0x0fff ram  (a1)
  0x1000-0x1fff mmio (a2)
  0x2000-0x2fff ram  (a3)

to:
  0x0000-0x2fff ram  (b1)

The single pass algorithm removed a1, added b2, then removed a2 and a3,
which caused the wrong memory map to be built.  The two pass algorithm
removes a1, a2, and a3, then adds b1.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As with the rest of the memory API, the caller associates an eventfd
with an address, and the memory API takes care of registering or
unregistering when the address is made visible or invisible to the
guest.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This eases the transition to the new API.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow registering I/O ports via the same mechanism as mmio ranges.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>