The discard code in migration/ram.c would send request for
zero length discards in the case where no discards were needed.
It doesn't appear to have had any bad effect.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Xen 2016/06/14

# gpg: Signature made Tue 14 Jun 2016 16:01:52 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20160614-tag:
  xen: Clean up includes
  xen/blkif: avoid double access to any shared ring request fields
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * add PMU support for virt machine under KVM
 * fix reset and migration of TTBCR(S)
 * add virt-2.7 machine type
 * QOMify various ARM devices
 * implement xilinx DisplayPort device
 * don't permit ARMv8-only Neon insns to work on ARMv7

# gpg: Signature made Tue 14 Jun 2016 16:01:45 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20160614-2: (30 commits)
  target-arm: Don't permit ARMv8-only Neon insns on ARMv7
  arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma
  introduce xlnx-dp
  introduce xlnx-dpdma
  hw/i2c-ddc.c: Implement DDC I2C slave
  introduce dpcd module
  introduce aux-bus
  i2c: Factor our send() and recv() common logic
  i2c: implement broadcast write
  i2cbus: remove unused dev field
  hw/sd: QOM'ify pl181.c
  hw/dma: QOM'ify pxa2xx_dma.c
  hw/misc: QOM'ify mst_fpga.c
  hw/misc: QOM'ify exynos4210_pmu.c
  hw/misc: QOM'ify arm_l2x0.c
  hw/gpio: QOM'ify zaurus.c
  hw/gpio: QOM'ify pl061.c
  hw/gpio: QOM'ify omap_gpio.c
  hw/i2c: QOM'ify versatile_i2c.c
  hw/i2c: QOM'ify omap_i2c.c
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Neon instructions VCVTA, VCVTM, VCVTN, VCVTP, VRINTA, VRINTM,
VRINTN, VRINTP, VRINTX, and VRINTZ were only introduced with ARMv8,
so they need a guard to make them UNDEF if the CPU only supports ARMv7.
(We got this right for all the other new-in-v8 insns, but forgot
it for these Neon 2-reg-misc ops.)
Reported-by: NChristophe Lyon <christophe.lyon@linaro.org>
Tested-by: NChristophe Lyon <christophe.lyon@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1465492511-9333-1-git-send-email-peter.maydell@linaro.org

This adds the DP and the DPDMA to the Zynq MP platform.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is the implementation of the DisplayPort.
It has an aux-bus to access dpcd and edid.

Graphic plane is connected to the channel 3.
Video plane is connected to the channel 0.
Audio stream are connected to the channels 4 and 5.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-9-git-send-email-fred.konrad@greensocs.com
[PMM: fixed format strings]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is the implementation of the DPDMA.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement an I2C slave which implements DDC and returns the
EDID data for an attached monitor.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-by: NHyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com

  - Rebased on the current master.
  - Modified for QOM.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
[PMM: actually wire up the vmstate to dc->vmsd]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This introduces dpcd module.
It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This introduces a new bus: aux-bus.

It contains an address space for aux slaves devices and a bridge to an I2C bus
for I2C through AUX transactions.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Most of the control flow logic between send and recv (error checking
etc) is the same. Factor this out into a common send_recv() API.
This is then usable by clients, where the control logic for send
and receive differs only by a boolean. E.g.

if (send)
   i2c_send(...):
else
   i2c_recv(...);

becomes:

i2c_send_recv(... , send);
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com
Changes from FK:
  * Rebased on master.
  * Rebased on my i2c broadcast patch.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This does a write to every slaves when the I2C bus get a write to address 0.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The dev field in i2cbus is not used.
So just drop it.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

split the old SysBus init function into an instance_init
and a Device realize function
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-13-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

split the old SysBus init function into an instance_init
and a Device realize function
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-12-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-8-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Merge the pl061_initfn into pl061_init
* Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Split the old SysBus init into an instance_init and
  DeviceClass::realize function
* Drop the SysBus init function
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Split the omap_i2c_init into an instance_init and realize function
* Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* Rename the exynos4210_i2c_realize to exynos4210_i2c_init
* Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the old SysBus init function and use instance_init
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465815255-21776-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1465746713-30414-5-git-send-email-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Create two variants of DEFINE_VIRT_MACHINE. One, just called
DEFINE_VIRT_MACHINE, that does not set properties that only
the latest machine type should have, and another that does.
This will hopefully reduce potential for errors when adding
new versions.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1465746713-30414-4-git-send-email-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use DEFINE_VIRT_MACHINE to generate versioned machine type info.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1465746713-30414-3-git-send-email-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename machvirt_info (which is specifically for 2.6 TypeInfo)
to machvirt_2_6_info, and separate the type registration of the
abstract machine type from the versioned type.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1465746713-30414-2-git-send-email-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit 6459b94c broke reset and migration of the AArch32
TTBCR(S) register if the guest used non-LPAE page tables. This is
because the AArch32 TTBCR register definition is marked as ARM_CP_ALIAS,
meaning that the AArch64 variant has to handle migration and reset.
Although AArch64 TCR_EL3 doesn't need to care about the mask and
base_mask fields, AArch32 may do so, and so we must use the special
TTBCR reset and raw write functions to ensure they are set correctly.

This doesn't affect TCR_EL2, because the AArch32 equivalent of that
is HTCR, which never uses the non-LPAE page table variant.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reported-by: NPranith Kumar <bobby.prani+qemu@gmail.com>
Reviewed-by: NSergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1465488181-31977-1-git-send-email-peter.maydell@linaro.org

Add PMU IRQ number in ACPI table, then we can use PMU in guest through
ACPI.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a virtual PMU device for virt machine while use PPI 7 for PMU
overflow interrupt number.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Check if kvm supports guest PMUv3. If so, set the corresponding feature
bit for vcpu.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>

If qdev_try_create() is passed NULL for the bus, it will automatically
put the newly created device onto the default system bus. However
if the device is not actually a SysBusDevice then this will result
in later crashes (for instance when running the monitor "info qtree"
command) because code reasonably assumes that all devices on the system
bus are system bus devices.

Generally the mistake is that the calling code should create the
object with object_new(TYPE_FOO) rather than qdev_create(NULL, TYPE_FOO);
see commit 6749695e for an example of fixing this bug.

Assert in qdev_try_create() if the device isn't suitable to put on
the system bus, so that this mistake results in failure earlier
and more reliably.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

More s390x patches, this time mostly dealing with channel I/O:
Bugfixes and cleanups, and dequeue pending interrupts after
machine checks.

# gpg: Signature made Tue 14 Jun 2016 13:09:43 BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20160614:
  s390x/kvm: Fixup interrupt type for non-adapter I/O interrupts
  s390x: Limit s390-ccw machines to 248 CPUs
  virtio-ccw: Provide traces for indicator changes
  s390x/css: introduce property type for device ids
  s390x/css: clear IO irqs when generating IPI CRW
  s390x/kvm: add interface for clearing IO irqs
  linux-headers: update
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The current algorithm for I/O interrupts would result in a wrong
interrupt type for subchannel numbers fffe and ffff. In addition
a non adapter interrupt might look like an adapter interrupt for
any subchannel number that has the 0x0400 bit set.

No kernel has ever used the type outside logging - and the logging
was wrong all the time. For everything else the kernel used the
interrupt parameters.

Let's use the KVM_S390_INT_IO macro as for adapter interrupts.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The sclp scp read info call fills in a buffer with information about the
system. With more than 248 CPUs we overflow the 4k buffer of the SCCB,
leading to random data corruption. Basically ALL guest operating systems
call scp read info, so let's limit the machines to 248 CPUs to make it
obvious that >=249 does not work.

As KVM also limits itself to 248 and TCG on s390 does not support
SMP, this should cause no regression for any user as no VMs with more
than 248 VCPUs were ever possible.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This allows to trace changes in the summary and queue indicators
for the non-irqfd case. For irqfd, kernel traces are needed instead.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Let's introduce a CssDevId to handle device ids of the xx.x.xxxx
type used for channel devices. This has some benefits:

- We can use them in virtio-ccw and split the validity checks for
  a channel device id in general from the constraint checking
  within the virtio-ccw scope.
- We can reuse the device id type for future non-virtio channel
  devices.

While we're at it, improve the validity checks and disallow e.g.
trailing characters.
Suggested-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>