bdrv_co_discard is only covering drivers which have a .bdrv_co_discard()
implementation, but not those with .bdrv_aio_discard(). Not very nice,
and easy to avoid.
Suggested-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The buffer for description file was 4096 which only covers a few
hundred of extents. This changes the buffer to dynamic allocated with
g_strdup_printf in order to support bigger cases.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The AioContext ctx field is apparently unused in qemu codebase since
02ffb504.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qemu_co_queue_wait_insert_head() is unused in qemu code base now.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This removes "qemu-io> " prompt from qemu-io output in _filter_qemu_io,
and updates all the output files with the following command:

 cd tests/qemu-iotests && sed -i "s/qemu-io> //g" *.out
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If you open an image temporarily just because you want to check its size
or get it flushed, there's no real reason to open the whole backing file
chain.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In the case of snapshot=on, don't rely on the backing file path in the
temporary image any more, but override the backing file with the given
set of options. This way, block drivers that don't use a file name can
be accessed with snapshot=on, for example:

    -drive file.driver=nbd,file.host=localhost,snapshot=on

Which becomes internally something like:

    file.filename=/tmp/vl.AWQZCu,backing.file.driver=nbd,backing.file.host=localhost
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Pause the drive and start the block job, so we won't miss the block job.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

They wrap blkdebug "break" and "remove_break".

Add optional argument "resume" to cancel_and_wait().
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

iotests.py already has one.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Sheepdog support two kinds of redundancy, full replication and erasure coding.

# create a fully replicated vdi with x copies
 -o redundancy=x (1 <= x <= SD_MAX_COPIES)

# create a erasure coded vdi with x data strips and y parity strips
 -o redundancy=x:y (x must be one of {2,4,8,16} and 1 <= y < SD_EC_MAX_STRIP)

E.g, to convert a vdi into sheepdog vdi 'test' with 8:3 erasure coding scheme

$ qemu-img convert -o redundancy=8:3 linux-0.2.img sheepdog:test

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We can actually use BDRVSheepdogState *s to pass most of the parameters.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Nested QDicts used to be both entered recursively in order to move their
entries to the target QDict and also be moved themselves to the target
QDict like all other objects. This is harmless because for the top
level, qdict_do_flatten() will encounter the (now empty) QDict for a
second time and then delete it, but at the same time it's obviously
unnecessary overhead. Just delete nested QDicts directly after moving
all of their entries.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This will help people find mailing list relevant to sheepdog.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

cow_co_is_allocated() only checks one sector's worth of allocated bits
before returning. This is allowed but (slightly) inefficient, so extend
it to check all of the file's metadata sectors.
Signed-off-by: NCharlie Shepherd <charlie@ctshepherd.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

[kwolf: silenced compiler warning (-Wmaybe-uninitialized for changed)]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Process a whole sector's worth of COW bits by reading a sector, setting
the bits after skipping any already set bits, then writing it out again.
Make sure we only flush once before writing metadata, and only if we
need to write metadata.
Signed-off-by: NCharlie Shepherd <charlie@ctshepherd.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We have multiple dirty bitmaps in BDS now, switch QAPI to allow query
it (BlockInfo.dirty_bitmaps), and also drop old BlockInfo.dirty.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Previously a BlockDriverState has only one dirty bitmap, so only one
caller (e.g. a block job) can keep track of writing. This changes the
dirty bitmap to a list and creates a BdrvDirtyBitmap for each caller, the
lifecycle is managed with these new functions:

    bdrv_create_dirty_bitmap
    bdrv_release_dirty_bitmap

Where BdrvDirtyBitmap is a linked list wrapper structure of HBitmap.

In place of bdrv_set_dirty_tracking, a BdrvDirtyBitmap pointer argument
is added to these functions, since each caller has its own dirty bitmap:

    bdrv_get_dirty
    bdrv_dirty_iter_init
    bdrv_get_dirty_count

bdrv_set_dirty and bdrv_reset_dirty prototypes are unchanged but will
internally walk the list of all dirty bitmaps and set them one by one.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If a block device is unbacked, a streaming blockjob should immediately
finish instead of beginning to try to stream, then noticing the backing
file does not contain even the first sector (since it does not exist)
and then finishing normally.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

With this patch, qemu-img info sheepdog:image will show disk size for sheepdog
images.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Reviewed-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds a test for coroutine execution order in test-coroutine -
this catches a bug in the CPC coroutine implementation.
Signed-off-by: NCharlie Shepherd <charlie@ctshepherd.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There may be calls to error_setg() and especially error_setg_errno()
which blindly (and until now wrongly) assume these functions not to
clobber errno (e.g., they pass errno to error_setg_errno() and return
-errno afterwards). Instead of trying to find and fix all of these
constructs, just make sure error_setg() and error_setg_errno() indeed do
not clobber errno.
Suggested-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

If the target has_zero_init = 0, but supports efficiently
writing zeroes by unmapping we call bdrv_make_zero to
avoid fully allocating the target. This currently works
only for iscsi.  It can be extended to raw with
BLKDISCARDZEROES for example.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

this patch does 2 things:
a) only do additional call outs if BDRV_BLOCK_ZERO is not already set.
b) use the newly introduced bdrv_unallocated_blocks_are_zero()
   to return the zero state of an unallocated block. the used callout
   to bdrv_has_zero_init() is only valid right after bdrv_create.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

this patch adds a call to completely zero out a block device.
the operation is sped up by checking the block status and
only writing zeroes to the device if they currently do not
return zeroes. optionally the zero writing can be sped up
by setting the flag BDRV_REQ_MAY_UNMAP to emulate the zero
write by unmapping if the driver supports it.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

now that bdrv_co_discard can handle limits we do not need
the request split logic here anymore.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

this patch adds BlockLimits which introduces discard and write_zeroes
limits and alignment information to the BlockDriverState.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>