This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.

After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

  This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed.  Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch renames+moves the net_handle_fd_param() caller used to
obtain a file descriptor from either qemu_parse_fd() (the normal case)
or from monitor_get_fd() (migration case) into a generically prefixed
monitor_handle_fd_param() to be used by vhost-scsi code.

Also update net/[socket,tap].c consumers to use the new prefix.
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Reviewed-by: NJan Kiszka  <jan.kiszka@siemens.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Another step in moving the vlan feature out of net core.  Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Now that VLANClientState has been renamed to NetClientState all 'vc'
local variables should be 'nc'.  Much of the code already used 'nc' but
there are places where 'vc' needs to be renamed.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

The vlan feature is no longer part of net core.  Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.

This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

VLANState is no longer used and can be removed.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

The vlan implementation in net.c has been replaced by hubs so we can
remove the code.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Instead of using VLANState use net/hub.h to support the vlan qdev
property.  The vlan qdev property becomes an alias for the peer qdev
property but is represented as a VLAN ID number.  When a VLAN ID is
selected the device will really peer with a hub port.
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

Since hubs are now used to implement the 'vlan' feature and the vlan
argument is always NULL, remove the argument entirely and update all net
clients that use qemu_new_net_client().
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>

NET_CLIENT_TYPE_ -> NET_CLIENT_OPTIONS_KIND_
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: NLaszlo Ersek <lersek@redhat.com>

This is not a full QAPI conversion, but an intermediate step.

In essence, do_netdev_add() is split into three functions:

 1. netdev_add(): performs the actual work. This function is fully
    converted to Error (thus, it's "qapi-friendly")

 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
    coded by hand and not auto-generated (gen=no in the schema). The
    reason for this it's a lot easier and simpler to with QemuOpts
    this way

 3. hmp_netdev_add(): HMP front-end.

This design was suggested by Paolo Bonzini.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: NLaszlo Ersek <lersek@redhat.com>

Callers are changed to use qerror_report_err() to keep their QError
semantics.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: NLaszlo Ersek <lersek@redhat.com>

The only backend that really uses it is the socket one, which calls
monitor_get_fd(). But it can use 'cur_mon' instead.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: NLaszlo Ersek <lersek@redhat.com>

Reduce duplicated codes.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The most common use of -net tap is to connect a tap device to a bridge.  This
requires the use of a script and running qemu as root in order to allocate a
tap device to pass to the script.

This model is great for portability and flexibility but it's incredibly
difficult to eliminate the need to run qemu as root.  The only really viable
mechanism is to use tunctl to create a tap device, attach it to a bridge as
root, and then hand that tap device to qemu.  The problem with this mechanism
is that it requires administrator intervention whenever a user wants to create
a guest.

By essentially writing a helper that implements the most common qemu-ifup
script that can be safely given cap_net_admin, we can dramatically simplify
things for non-privileged users.  We still support existing -net tap options
as a mechanism for advanced users and backwards compatibility.

Currently, this is very Linux centric but there's really no reason why it
couldn't be extended for other Unixes.

A typical invocation would be similar to one of the following:

  qemu linux.img -net bridge -net nic,model=virtio

  qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper"
                 -net nic,model=virtio

  qemu linux.img -netdev bridge,id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

  qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

The default bridge that we attach to is br0.  The thinking is that a distro
could preconfigure such an interface to allow out-of-the-box bridged networking.

Alternatively, if a user wants to use a different bridge, a typical invocation
would be simliar to one of the following:

  qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio

  qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0"
                 -net nic,model=virtio

  qemu linux.img -netdev bridge,br=qemubr0,id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1

  qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0
                 -device virtio-net-pci,netdev=hn0,id=nic1
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRicha Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Allow overriding the location of Samba's smbd.

Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.
Signed-off-by: NBrad Smith <brad@comstyle.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Drop the open-coded MAC assignment from net_init_nic and replace it with
standard qemu_macaddr_default_if_unset which is also used by qdev. That
avoid creating colliding MACs when instantiating NICs via different
mechanisms.

This change requires to store the MAC as MACAddr in NICInfo, and the
remaining nd_table users need to be updated.

Based on suggestion by Peter Maydell.

CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Position entries of net_client_types according to the corresponding
values of NET_CLIENT_TYPE_*. The array size is now defined by
NET_CLIENT_TYPE_MAX. This will allow to obtain entries based on type
value in later patches.

At this chance rename NET_CLIENT_TYPE_SLIRP to NET_CLIENT_TYPE_USER for
the sake of consistency.

CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Diagnose the case where the user asked for a NIC via "-net nic"
but the board didn't instantiate that NIC (for example where the
user asked for two NICs but the board only supports one). Note
that this diagnostic doesn't apply to NICs created through -device,
because those are always instantiated.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

With -netdev, virtio devices present offload
features to guest, depending on the backend used.
Thus, removing host netdev peer while guest is
active leads to guest-visible inconsistency and/or crashes.

As a solution, while guest (NIC) peer device exists,
we prevent the host peer from being deleted.
This patch does this by adding peer_deleted flag in nic state:
if host device is going away while guest device
is around, set this flag and keep a shell of
the host device around for as long as guest device exists.

The link is put down so all packets will get discarded.

At the moment, management can detect that device deletion
is delayed by doing info net. As a next step, we shall add
commands that control hotplug/unplug without
removing the device, and an event to report that
guest has responded to the hotplug event.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>

Move inclusion of stdbool.h to common header files, instead of including
in an ad-hoc manner.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Monitor commands to go with -netdev.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>