- 12 6月, 2010 9 次提交
-
-
由 Luiz Capitulino 提交于
While there make the fail_unless() calls print error messages. IMPORTANT: The test for "\/" is failing, don't know why. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
It's valid JSON and should be handled. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
The JSON escape sequence "\/" and "\\" are valid and should be handled. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
The 'lexer' variable is passed by the caller, it can contain anything (eg. garbage). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Force -m31/-m64 based on s390/s390x target. Force -march=z990. The TCG backend will always require the long-displacement facility, so the compiler may as well make use of that as well. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
The default placement of the application at 0x80000000 is fine, and will avoid the default placement for most other guests. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
There's no _llseek on s390x either. Replace the existing test for __x86_64__ with a functional test for __NR_llseek. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 6月, 2010 9 次提交
-
-
由 Richard Henderson 提交于
This allows the use of direct calls to the helpers, and a direct branch back to the epilogue. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Before gcc 4.2, __builtin___clear_cache doesn't exist, and afterward the gcc s390 backend implements it as nothing. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Blue Swirl 提交于
42f1ced2 removed irq lowering during reset. However, for chip reset command and DMA reset signal, its actually the correct thing to do. Lower IRQ on soft reset only. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
BusState::name is allocated in qbus_create_inplace(). So it should be freed by qbus_free(). Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
This patch fixes the following compilation errors in multiboot.c when DEBUG_MULTIBOOT is defined. Use TARGET_FMT_plx instead of %x for target_phys_addr_t. CC i386-softmmu/multiboot.o cc1: warnings being treated as errors qemu/hw/multiboot.c: In function 'mb_add_mod': qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 4 has type 'target_phys_addr_t' qemu/hw/multiboot.c:121: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t' qemu/hw/multiboot.c: In function 'load_multiboot': qemu/hw/multiboot.c:279: error: format '%#x' expects type 'unsigned int', but argument 5 has type 'target_phys_addr_t' qemu/hw/multiboot.c:307: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t' qemu/hw/multiboot.c:308: error: format '%x' expects type 'unsigned int', but argument 3 has type 'target_phys_addr_t' make[1]: *** [multiboot.o] Error 1 Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
remove one #ifdef CONFIG_BOCHS_VBE. Call vga_init_vbe() instead. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
fix memory leak. there is no need to allocate more than one gui_timer. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 10 6月, 2010 22 次提交
-
-
由 Anthony Liguori 提交于
-
由 Edgar E. Iglesias 提交于
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@axis.com>
-
由 Richard Henderson 提交于
The full general-instruction-extension facility was added to binutils after the change to GPLv3. This is not the entire extension, just what we're using in TCG. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Unify with existing special-purpose configure code for win32. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Making an xyzdir variable for each directory prepares for the next patches introducing config-host.h defines and configure options for them. It also fixes the problem where overriding prefix at "make install" time did not override it for sysconfdir. Removes some of the differences between sysconfdir and other variables, the rest will go away later. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
confsuffix was write-only, flesh it out. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
Just a personal preference against duplicating hieroglyphics. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paolo Bonzini 提交于
It would fail later anyway. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32. Cc: Nathan Froyd <froydnj@codesourcery.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-