This patch corrects the VSX floating point to integer conversion
instructions by using the endian correct accessors.  The auxiliary
"j" index used by the existing macros is now obsolete and is removed.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This change corrects the VSX double precision to single precision and
single precision to double precisions conversion routines.  The endian
correct accessors are now used.  The auxiliary "j" index is no longer
necessary and is eliminated.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This change fixes the VSX scalar compare instructions.  The existing usage of "x.f64[0]"
is changed to "x.VsrD(0)".
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

A common pattern in the VSX helper code macros is the use of "x.fld[i]" where
"x" is a VSR and "fld" is an argument to a macro ("f64" or "f32" is passed).
This is not always correct on LE hosts.

This change addresses all instances of this pattern to be "x.fld" where "fld" is:

  - "VsrD(0)" for scalar instructions accessing 64-bit numbers
  - "VsrD(i)" for vector instructions accessing 64-bit numbers
  - "VsrW(i)" for vector instructions accessing 32-bit numbers

Note that there are no instances of this pattern where a scalar instruction
accesses a 32-bit number.

Note also that it would be correct to use "VsrD(i)" for scalar instructions since
the loop index is only ever "0".  I have choosen to use "VsrD(0)" instead ... it
seems a little clearer.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This change properly orders the doublewords of the VSRs 0-31.  Because these
registers are constructed from separate doublewords, they must be inverted
on Little Endian hosts.  The inversion is performed both when the VSR is read
and when it is written.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This change defines accessors for VSR doubleword and word fields that
are correct from a host Endian perspective.  This allows code to
use the Power ISA indexing numbers in code.

For example, the xscvdpsxws instruction has a target VSR that looks
like this:

  0           32       64                    127
  +-----------+--------+-----------+-----------+
  | undefined | SW     | undefined | undefined |
  +-----------+--------+-----------+-----------+

VSX helper code will use VsrW(1) to access this field.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The various VSX Convert to Integer instructions should truncate the
floating point number to an integer value, which is equivalent to
a round-to-zero rounding mode.  The existing VSX floating point to
integer conversion helpers are erroneously using the rounding mode set
int the PowerPC Floating Point Status and Control Register (FPSCR).
This change corrects this defect by using the appropriate
float*_to_*_round_to_zero() routines fro the softfloat library.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This change adds the float32_to_uint64_round_to_zero function to the softfloat
library.  This function fills out the complement of float32 to INT round-to-zero
conversion rountines, where INT is {int32_t, uint32_t, int64_t, uint64_t}.

This contribution can be licensed under either the softfloat-2a or -2b
license.
Signed-off-by: NTom Musta <tommusta@gmail.com>
Tested-by: NTom Musta <tommusta@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The change log is:
  > Isolate sc 1 detection logic
  > build: auto-detect ppc64 architecture
  > cas: increase hcall buffer size to accomodate 256 cpus
  > usb: change device tree naming
  > usb-core: adjust port numbers in set_address
  > virtio-scsi: correct srplun comment
  > Fix kernel loading
  > Workaround to make grub2 assign server ip from dhcp ack packet only
  > ELF: Enter LE binary in LE mode
  > ELF loading should fail for virt != phys
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We now reset SPRs to their reset values on CPU reset. So if we want
to have an SPR persistently changed, we need to change its default
reset value rather than the value itself manually.

Do this for SPR_BOOKE_PIR, fixing e500v2 SMP boot.
Reported-by: NFrederic Konrad <fred.konrad@greensocs.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Tested-by: NKONRAD Frederic <fred.konrad@greensocs.com>

QOM/QTest infrastructure fixes

* Relicensing of FWPathProvider interface
* Clean up all targets' qtests

# gpg: Signature made Mon 07 Apr 2014 17:56:13 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-2.0:
  tests: Update check-clean rule
  fw-path-provider: Change GPL version to 2+
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Only i386, x86_64, sparc and sparc64 qtests were cleaned up.
Make this more generic to not miss any newly tested targets.
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

When installing modules (when --enable-modules is specified for
./configure), Makefile uses the following construct to replace all
slashes with dashes in module name:

 ${s//\//-}

This is a bash-specific substitution mechanism.  POSIX does not
have it, and some operating systems (for example Debian) does not
implement this construct in default shell (for example dash).

Use more traditional way to perform the substitution: use `tr' tool.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Message-id: 1396707946-21351-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The commit 88c1ee73
char/serial: Fix emptyness check

Still causes extra NULL byte(s) to be sent.

So if the fifo is empty, do not send an extra NULL byte.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Message-id: 1395160174-16006-1-git-send-email-dslutz@verizon.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

spice: monitors_config: check pointer before dereferencing

# gpg: Signature made Mon 07 Apr 2014 11:19:19 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-6:
  spice: monitors_config: check pointer before dereferencing
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

gtk: pointer fixes from Takashi Iwai.

# gpg: Signature made Mon 07 Apr 2014 09:51:52 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-4:
  ui: Update MAINTAINERS entry.
  gtk: Remember the last grabbed pointer position
  gtk: Fix the relative pointer tracking mode
  gtk: Use gtk generic event signal instead of motion-notify-event
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reported-by: NFabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

With Amazon eating Anthonys time status "Maintained" certainly isn't
true any more.  Update entry accordingly.

Also add myself, so scripts/get_maintainer.pl will Cc: me, to reduce
the chance ui patches fall through the cracks on our pretty loaded
qemu-devel mailing list.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It's pretty annoying that the pointer reappears at a random place once
after grabbing and ungrabbing the input.  Better to restore to the
original position where the pointer was grabbed.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587Tested-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The relative pointer tracking mode was still buggy even after the
previous fix of the motion-notify-event since the events are filtered
out when the pointer moves outside the drawing window due to the
boundary check for the absolute mode.

This patch fixes the issue by moving the unnecessary boundary check
into the if block of absolute mode, and keep the coordinate in the
relative mode even if it's outside the drawing area.  But this makes
the coordinate (last_x, last_y) possibly pointing to (-1,-1),
introduce a new flag to indicate the last coordinate has been
updated.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587Tested-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The GDK motion-notify-event isn't generated when the pointer goes out
of the target window even if the pointer is grabbed, which essentially
means to lose the pointer tracking in gtk-ui.

Meanwhile the generic "event" signal is sent when the pointer is
grabbed, so we can use this and pick the motion notify events manually
there instead.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587Tested-by: NCole Robinson <crobinso@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The subsection already exists in one well-known enterprise Linux
distribution, but for some strange reason the fields were swapped
when forward-porting the patch to upstream.

Limit headaches for said enterprise Linux distributor when the
time will come to rebase their version of QEMU.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1396452782-21473-1-git-send-email-pbonzini@redhat.com
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches for 2.0.0

# gpg: Signature made Fri 04 Apr 2014 20:25:08 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  dataplane: replace iothread object_add() with embedded instance
  iothread: make IOThread struct definition public
  dma-helpers: Initialize DMAAIOCB in_cancel flag
  block: Check bdrv_getlength() return value in bdrv_append_temp_snapshot()
  block: Fix snapshot=on for protocol parsed from filename
  qemu-iotests: Remove CR line endings in reference output
  block: Don't parse 'filename' option
  qcow2: Put cache reference in error case
  qcow2: Flush metadata during read-only reopen
  iscsi: Don't set error if already set in iscsi_do_inquiry
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Before IOThread was its own object, each virtio-blk device would create
its own internal thread.  We need to preserve this behavior for
backwards compatibility when users do not specify -device
virtio-blk-pci,iothread=<id>.

This patch changes how the internal IOThread object is created.
Previously we used the monitor object_add() function, which is really a
layering violation.  The problem is that this needs to assign a name but
we don't have a name for this internal object.

Generating names for internal objects is a pain but even worse is that
they may collide with user-defined names.

Paolo Bonzini <pbonzini@redhat.com> suggested that the internal IOThread
object should not be named.  This way the conflict cannot happen and we
no longer need object_add().

One gotcha is that internal IOThread objects will not be listed by the
query-iothreads command since they are not named.  This is okay though
because query-iothreads is new and the internal IOThread is just for
backwards compatibility.  New users should explicitly define IOThread
objects.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Make the IOThread struct definition public so objects can be embedded in
parent structs.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Initialize the dbs->in_cancel flag in dma_bdrv_io(), since qemu_aio_get()
does not return zero-initialized memory. Spotted by the clang sanitizer
(which complained when the value loaded in dma_complete() was not valid
for a bool type); this might have resulted in leaking the AIO block.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify
the originally requested image as the backing file of the newly created
temporary snapshot. This means that the filename is stored in
"file.filename", which is an option that is not parsed for protocol
names. Therefore things like -drive file=nbd:localhost:10809 were
broken because it looked for a local file with the literal name
'nbd:localhost:10809'.

This patch changes the way BDRV_O_SNAPSHOT works once again. We now open
the originally requested image as normal, and then do a similar
operation as for live snapshots to put the temporary snapshot on top.
This way, both driver specific options and parsed filenames work.

As a nice side effect, this results in code movement to factor
bdrv_append_temp_snapshot() out. This is a good preparation for moving
its call to drive_init() and friends eventually.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

If the guest attempts to execute from unreadable memory, this will
cause us to longjmp back to the main loop from inside the
target frontend decoder. For linux-user mode, this means we will
still hold the tb_ctx.tb_lock, and will deadlock when we try to
start executing code again. Unlock the lock in the return-from-longjmp
code path to avoid this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndrei Warkentin <andrey.warkentin@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

When checking a page range, if we found that a page was
made read-only by QEMU because it contained translated code,
we were incorrectly returning immediately after unprotecting
that page, rather than continuing to check the entire range,
so we might fail to unprotect pages later in the range, or
might incorrectly return a "success" result even if later
pages were not writable.

In particular, this could cause segfaults in a case where
signals are delivered back to back on a target architecture
which uses trampoline code in the stack frame (as AArch64
currently does). The second signal causes a segfault because
the frame cannot be written to (it was protected because
we translated and executed the restorer trampoline, and the
unprotect logic did not unprotect the whole range).

Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com
[PMM: expanded commit message a bit]
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and
midway), silently continue if the CPU object has no reset-cbar property
rather than failing. This allows these boards to be used under KVM with
the "-cpu host" option, since the 'host' CPU object has no reset-cbar
property.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRob Herring <rob.herring@linaro.org>

If the user passes an unknown CPU name via the '-cpu' option, exit
with an error message rather than segfaulting.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRob Herring <rob.herring@linaro.org>

qemu doesn't print these CRs any more. The test still didn't fail
because the output comparison ignores line endings, but the change turns
up each time when you want to update the output.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

When using the QDict option 'filename', it is supposed to be interpreted
literally. The code did correctly avoid guessing the protocol from any
string before the first colon, but it still called bdrv_parse_filename()
which would, for example, incorrectly remove a 'file:' prefix in the
raw-posix driver.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

When qcow2_get_cluster_offset() sees a zero cluster in a version 2
image, it (rightfully) returns an error. But in doing so it shouldn't
leak an L2 table cache reference.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.

In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.

Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.

Cc: qemu-stable@nongnu.org
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

This eliminates the possible assertion failure in error_setg().
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/riku/for-2.0:
  linux-user: pass correct host flags to accept4()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>