On platforms that don't support makecontext(3) use gthread based
coroutine implementation.

Darwin has makecontext(3) but getcontext(3) is stubbed out to return
ENOTSUP.  Andreas Färber <andreas.faerber@web.de> debugged this and
contributed the ./configure test which solves the issue for Darwin/ppc64
(and ppc) v10.5.

[Original patch by Aneesh, made consistent with coroutine-ucontext.c and
switched to GStaticPrivate by Stefan.  Tested on Linux and OpenBSD.]
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Asynchronous code is becoming very complex.  At the same time
synchronous code is growing because it is convenient to write.
Sometimes duplicate code paths are even added, one synchronous and the
other asynchronous.  This patch introduces coroutines which allow code
that looks synchronous but is asynchronous under the covers.

A coroutine has its own stack and is therefore able to preserve state
across blocking operations, which traditionally require callback
functions and manual marshalling of parameters.

Creating and starting a coroutine is easy:

  coroutine = qemu_coroutine_create(my_coroutine);
  qemu_coroutine_enter(coroutine, my_data);

The coroutine then executes until it returns or yields:

  void coroutine_fn my_coroutine(void *opaque) {
      MyData *my_data = opaque;

      /* do some work */

      qemu_coroutine_yield();

      /* do some more work */
  }

Yielding switches control back to the caller of qemu_coroutine_enter().
This is typically used to switch back to the main thread's event loop
after issuing an asynchronous I/O request.  The request callback will
then invoke qemu_coroutine_enter() once more to switch back to the
coroutine.

Note that if coroutines are used only from threads which hold the global
mutex they will never execute concurrently.  This makes programming with
coroutines easier than with threads.  Race conditions cannot occur since
only one coroutine may be active at any time.  Other coroutines can only
run across yield.

This coroutines implementation is based on the gtk-vnc implementation
written by Anthony Liguori <anthony@codemonkey.ws> but it has been
significantly rewritten by Kevin Wolf <kwolf@redhat.com> to use
setjmp()/longjmp() instead of the more expensive swapcontext() and by
Paolo Bonzini <pbonzini@redhat.com> for Windows Fibers support.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Instead of using its own definitions scsi-disk should
be using the device type of the parent device.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Sanitize SCSI command definitions.
Add _10 suffix to READ_CAPACITY, WRITE_VERIFY, VERIFY, READ_LONG,
WRITE_LONG, and WRITE_SAME.
Add new command definitions for LOCATE_10, UNMAP, VARLENGTH_CDB,
WRITE_FILEMARKS_16, EXTENDED_COPY, ATA_PASSTHROUGH, ACCESS_CONTROL_IN,
ACCESS_CONTROL_OUT, COMPARE_AND_WRITE, VERIFY_16, SYNCHRONIZE_CACHE_16,
LOCATE_16, ERASE_16, WRITE_LONG_16, LOAD_UNLOAD, VERIFY_12.
Remove invalid definition of WRITE_LONG_2.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

REZERO_UNIT command is obsolete. Remove support for it.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

SET_WINDOW command is vendor-specific only.
So we shouldn't try to emulate it.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Replace tabs with spaces.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

VHD files technically can be up to 2Tb, but virtual pc is limited
to 127G.  Currently qemu-img refused to create vpc files > 127G,
but it is failing to return error when converting from a non-vpc
VHD file which is >127G.  It returns success, but creates a truncated
converted image.  Also, qemu-img info claims the vpc file is 127G
(and clean).

This patch detects a too-large vpc file and returns -EFBIG.  Without
this patch,

=============================================================
root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/140g-dynamic.vhd
image: /mnt/140g-dynamic.vhd
file format: vpc
virtual size: 127G (136899993600 bytes)
disk size: 284K
root@ip-10-38-123-242:~/qemu-fixed# qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y
root@ip-10-38-123-242:~/qemu-fixed# echo $?
0
root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/y
image: /mnt/y
file format: raw
virtual size: 127G (136899993600 bytes)
disk size: 0
=============================================================

(The 140G image was truncated with no warning or error.)

With the patch, I get:

=============================================================
root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img info /mnt/140g-dynamic.vhd
qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large
root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y
qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large
qemu-img: Could not open '/mnt/140g-dynamic.vhd'
=============================================================

See https://bugs.launchpad.net/qemu/+bug/814222 for details.
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit aea2a33c made bdrv_eject() obey the locked flag.  Correct for
medium eject (eject_flag set), incorrect for medium load (eject_flag
clear).  See MMC-5 Table 341 "Actions for Lock/Unlock/Eject".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Callees always return 0, except for FreeBSD's cdrom_eject(), which
returns -ENOTSUP when the device is in a terminally wedged state.

The only caller is bdrv_eject(), and it maps -ENOTSUP to 0 since
commit 4be9762a.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The only caller is bdrv_set_locked(), and it ignores the value.

Callees always return 0, except for FreeBSD's cdrom_set_locked(),
which returns -ENOTSUP when the device is in a terminally wedged
state.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It's been disabled since the start (commit 19cb3738, Aug 2006), and
has been untouched except for spelling fixes and such.  I don't feel
like dragging it along any further.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BlockDriverState members change_cb and change_opaque are initially
null.  The device model may set them, with bdrv_set_change_cb().  If
the device model gets detached (hot unplug), they're left dangling.
Only safe because device hot unplug automatically destroys the
BlockDriverState.  But that's a questionable feature, best not to rely
on it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Ejecting hard disk platters can only end in tears.

If you need to revoke access to an image, use drive_del, not eject -f.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Fixes emulation with io-thread.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Fix incorrect logic and typos in previous commit
1bfd07bd.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix breakage by a640f031
and 55c0975c.

Some TCG targets don't implement all TCG ops, so make
optimizing those conditional.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Perform constant folding for NOT and EXT{8,16,32}{S,U} operations.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Perform constant forlding for SHR, SHL, SAR, ROTR, ROTL operations.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Perform constant folding for AND, OR, XOR operations.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Perform actual constant folding for ADD, SUB and MUL operations.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make tcg_constant_folding do copy and constant propagation. It is a
preparational work before actual constant folding.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Added file tcg/optimize.c to hold TCG optimizations. Function tcg_optimize
is called from tcg_gen_code_common. It calls other functions performing
specific optimizations. Stub for constant folding was added.
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.

Define global env in dyngen-exec.h.

For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.

LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().

ARM: make raise_exception() static.

Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch almost rewrites acpi_table_add() function
(but still leaves it using old get_param_value() interface).
The result is that it's now possible to specify whole table
(together with a header) in an external file, instead of just
data portion, with a new file= parameter, but at the same time
it's still possible to specify header fields as before.

Now with the checkpatch.pl formatting fixes, thanks to
Stefan Hajnoczi for suggestions, with changes from
Isaku Yamahata, and with my further refinements.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: John Baboval <john.baboval@virtualcomputer.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
[yamahata@valinux.co.jp: fix compile error, comment fallthrough]
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Implement %fprs.DU/DL bits.
The FPU sets %fprs.DL and %fprs.DU when values are assigned to %f0-31
and %f32-63 respectively.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix the problem that result values are not assigned to the destination
registers.
Signed-off-by: NTsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This leads to random off-by-one error.
When the size of the SD is exactly 1GB, the emulation was returning a
wrong SDHC CSD descriptor.
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

The code which prints the debug usage message on '-d ?' for *-user
has to come before the check for "not enough arguments", so that
"qemu-foo -d ?" prints the list of possible debug log items rather than
the generic usage message. (This was inadvertently broken in commit
c235d738.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

For unknown reasons, Windows drivers (tested with XP and Win7) ignore
usb-tablet events that move the pointer to 0/0. So always report 0/0 as
1/0.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Zipit Z2 is small PXA270 based handheld.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

The program actions onenand_prog_main() and onenand_prog_spare()
can only set bits.

This implies a rewrite of onenand_erase() to not use the program
functions, since erase does need to set bits.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Handle the manufacturer, device and version IDs separately rather than
smooshing them all together into a single uint32_t. Note that the ID
registers are actually 16 bit, even though typically the top bits are 0
and the Read Identification Data command only returns the bottom 8 bits.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Pass the BlockDriverState to the onenand init function so it doesn't
need to look up the drive itself.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Qdevify the NAND device.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Writing to a NAND device cannot set bits, it can only clear them;
implement this rather than simply copying the data.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>