This fixes a bug where qemu_icount and qemu_icount_bias are not migrated.
It adds a subsection "timer/icount" to vmstate_timers so icount is migrated only
when needed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This puts qemu_icount and qemu_icount_bias into TimerState structure to allow
them to be migrated.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.

Currently there is a single command implemented, "q".  It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.

It can be used as:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtserialport,chardev=ctd -chardev testdev,id=ctd

or, use:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtconsole,chardev=ctd -chardev testdev,id=ctd

to bind it to virtio-serial port0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Line numbers changed, and some translations were missing after commit
3d914488.

Update also "Show Tabs" to a more common translation, and remove some
old unused lines at the end.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Free t0 and t1 in opcode OPC_DINSV.
Signed-off-by: NDongxue Zhang <elta.era@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

trivial patches for 2014-07-26

# gpg: Signature made Sat 26 Jul 2014 08:16:55 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-07-26:
  qemu-options: fix another allows-to for -net l2tpv3
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Here is the serial fix for 2.1.

# gpg: Signature made Fri 25 Jul 2014 13:36:23 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  qemu-char: ignore flow control if a PTY's slave is not connected
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

After commit f702e62a (serial: change retry logic to avoid concurrency,
2014-07-11), guest boot hangs if the backend is an unconnected PTY.

The reason is that PTYs do not support G_IO_HUP, and serial_xmit is
never called.  To fix this, simply invoke serial_xmit immediately
(via g_idle_source_new) when this happens.
Tested-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vnc: fix two vnc update issues.

# gpg: Signature made Fri 25 Jul 2014 08:44:23 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20140725-1:
  vnc update fix
  fix full frame updates for VNC clients
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We need to remember has_updates for each vnc client.  Otherwise it might
happen that vnc_update_client(has_dirty=1) takes the first exit due to
output buffers not being flushed yet and subsequent calls with
has_dirty=0 take the second exit, wrongly assuming there is nothing to
do because the work defered in the first call is ignored.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>

If the client asks for !incremental frame updates, it has lost its content
so dirty doesn't matter - it has to see the full frame, so setting force_update
Signed-off-by: NStephan Kulow <coolo@suse.de>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>

* remotes/qmp-unstable/queue/qmp:
  docs: document missing VSERPORT_CHANGE event
  docs: document missing POWERDOWN event
  docs: document missing SPICE_MIGRATE_COMPLETED event
  docs: split SPICE_* event docs
  docs: grammar fixes to qmp-events
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The VSERPORT_CHANGE event was added in e2ae6159.  The patch for
this event was prepared at a time when this file was gone, even
though it got applied immediately after dfab4892 restored this
file.  Duplicate the documentation into this file, so that
anyone using this file instead of qapi will not miss out on this
new event.

* docs/qmp/qmp-events.txt (VSERPORT_CHANGE): Add.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NWenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The POWERDOWN event was first documented in 0aab9ec3.  But since
dfab4892 later restored this file to the state prior to qmp events,
and we never documented it in the past, anyone using this file
instead of qapi will miss out on this event.  Tweak the existing
wording of SHUTDOWN to match 84321831, and make the difference
between the two events apparent.

* docs/qmp/qmp-events.txt (POWERDOWN): Add.
(SHUTDOWN): Tweak.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NWenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The SPICE_MIGRATE_COMPLETED event was first documented in
7cfadb6b.  But since dfab4892 later restored this file to the
state prior to qmp events, and we never documented it in the
past, anyone using this file instead of qapi will miss out on
this event.

* docs/qmp/qmp-events.txt (SPICE_MIGRATE_COMPLETED): Add.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NWenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

For consistency with the rest of this file, every event should be
listed in isolation.  Compare how commit 7cfadb6b split
SPICE_CONNECTED and SPICE_DISCONNECTED into separate qmp events.

* docs/qmp/qmp-events.txt (SPICE_CONNECTED, SPICE_DISCONNECTED):
Split.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NWenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

When converting to qmp events, commits 7cfadb6b and a6330785
fixed some grammar as part of moving text between files.  But
since dfab4892 later restored this file to the state prior to
qmp events, we have to do it again.

* docs/qmp/qmp-events.txt (RESET, SPICE_INITIALIZED): Tweak.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NWenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

usb: mtp: tag root property as experimental

# gpg: Signature made Wed 23 Jul 2014 07:56:21 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20140723-1:
  usb: mtp: tag root property as experimental
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reason: we don't want commit to that interface yet.  Possibly
the implementation will be switched over to use fsdev.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The VMStateDescription for the imx_ccm device was missing its
terminator. Found by static search of the codebase using
a regex based on one suggested by Ian Jackson:
  pcregrep -rMi '(?s)VMStateField(?:(?!END_OF_LIST).)*?;' $(git grep -l 'VMStateField\[\]')
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org

"vmstate_xhci_event" was introduced in commit 37352df3 ("xhci: add live
migration support"), and first released in v1.6.0. The field list in this
VMSD is not terminated with the VMSTATE_END_OF_LIST() macro.

During normal use (ie. migration), the issue is practically invisible,
because the "vmstate_xhci_event" object (with the unterminated field list)
is only ever referenced -- via "vmstate_xhci_intr" -- if xhci_er_full()
returns true, for the "ev_buffer" test. Since that field_exists() check
(apparently) almost always returns false, we almost never traverse
"vmstate_xhci_event" during migration, which hides the bug.

However, Amit's vmstate checker forces recursion into this VMSD as well,
and the lack of VMSTATE_END_OF_LIST() breaks the field list terminator
check (field->name != NULL) in dump_vmstate_vmsd(). The result is
undefined behavior, which in my case translates to infinite recursion
(because the loop happens to overflow into "vmstate_xhci_intr", which then
links back to "vmstate_xhci_event").

Add the missing terminator.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Patch queue for ppc - 2014-07-22

Only a single bug fix to make -mem-path only affect RAM regions.

# gpg: Signature made Tue 22 Jul 2014 16:38:04 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream:
  ppc: fix -mem-path failure
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

commit e938ba0c tried to enable -mem-path for ppc but breaked some ppc
boards.

The problems are:

1. it fails when allocating memory for rom, sram whose sizes are less
   than huge page size:

   ./ppc-softmmu/qemu-system-ppc  -m 512 -mem-path /hugepages/ \
   -kernel /home/hutao/Downloads/vmlinux-ppc -initrd \
   /home/hutao/Downloads/initrd-ppc.gz
   qemu-system-ppc: /mnt/data/projects/qemu/exec.c:1184: qemu_ram_set_idstr: Assertion `new_block' failed.

2. if there is a numa node backed by memory backend object, qemu fails
   with message:

   ./ppc-softmmu/qemu-system-ppc  -m 512 \
   -object memory-backend-file,size=512M,mem-path=/hugepages,id=f0 \
   -numa node,nodeid=0,memdev=f0 \
   -kernel /home/hutao/Downloads/vmlinux-ppc \
   -initrd /home/hutao/Downloads/initrd-ppc.gz
   qemu-system-ppc: memory backend f0 is used multiple times. Each -numa option must use a different memdev value.

This patch does following:

1. replaces memory_region_allocate_system_memory() with
   memory_region_init_ram() for rom, sram. Then only system memory
   is backed by hugepages when specifying mem-path.

2. for memory banks, allocates all ram with
   one memory_region_allocate_system_memory(), and use
   memory_region_init_alias() to initialize memory banks.

Tested machines: default(g3beige), mac99, taihu, bamboo, ref405ep.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

* remotes/amit-virtio-rng/for-2.1:
  virtio-rng: Add human-readable error message for negative max-bytes parameter
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If a negative integer is used for the max_bytes parameter, QEMU currently
calls abort() and leaves behind a core dump. This patch replaces the
abort with a simple error message to make the reason for the termination
clearer. This also ensures device-hotplug with invalid input doesn't
cause qemu to quit.

There is an underlying insufficiency in the parameter parsing code of QEMU
that renders it unable to reject negative values for unsigned properties,
thus the error message "a non-negative integer below 2^63" is the most
user-friendly and correct message we can give until the underlying
insufficiency is corrected.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

One of the two pending migration fix, and a small KVM patch.

# gpg: Signature made Tue 22 Jul 2014 11:49:30 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  kvm-all: Use 'tmpcpu' instead of 'cpu' in sub-looping to avoid 'cpu' be NULL
  exec: fix migration with devices that use address_space_rw
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If kvm_arch_remove_sw_breakpoint() in CPU_FOREACH() always be fail, it
will let 'cpu' NULL. And the next kvm_arch_remove_sw_breakpoint() in
QTAILQ_FOREACH_SAFE() will get NULL parameter for 'cpu'.

And kvm_arch_remove_sw_breakpoint() can assumes 'cpu' must never be NULL,
so need define additional temporary variable for 'cpu' to avoid the case.

Cc: qemu-stable@nongnu.org
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Devices that use address_space_rw to write large areas to memory
(as opposed to address_space_map/unmap) were broken with respect
to migration since fe680d0d (exec: Limit translation limiting in
address_space_translate to xen, 2014-05-07).  Such devices include
IDE CD-ROMs.

The reason is that invalidate_and_set_dirty (called by address_space_rw
but not address_space_map/unmap) was only setting the dirty bit for
the first page in the translation.

To fix this, introduce cpu_physical_memory_set_dirty_range_nocode that
is the same as cpu_physical_memory_set_dirty_range except it does not
muck with the DIRTY_MEMORY_CODE bitmap.  This function can be used if
the caller invalidates translations with tb_invalidate_phys_page_range.

There is another difference between cpu_physical_memory_set_dirty_range
and cpu_physical_memory_set_dirty_flag; the former includes a call
to xen_modified_memory.  This is handled separately in
invalidate_and_set_dirty, and is not needed in other callers of
cpu_physical_memory_set_dirty_range_nocode, so leave it alone.

Just one nit: now that invalidate_and_set_dirty takes care of handling
multiple pages, there is no need for address_space_unmap to wrap it
in a loop.  In fact that loop would now be O(n^2).
Reported-by: NDave Gilbert <dgilbert@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

QOM and device refactorings

* Machine: Property name fixups for 2.1 ABI

# gpg: Signature made Mon 21 Jul 2014 18:00:23 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-2.1:
  machine: Replace underscores in machine's property names
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Replaced '_' with '-' to comply with QOM guidelines.
Made the conversion from command line to QMP in vl.c.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

trivial patches for 2014-07-18

# gpg: Signature made Fri 18 Jul 2014 15:04:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-07-18:
  tests: Add missing 'static' attributes (fix warnings from smatch)
  migration: Add missing 'static' attribute
  qga: Add missing 'static' attribute
  hw/usb: Add missing 'static' attribute
  doc: slirp supports ICMP echo if enabled in Linux
  qemu-img: Remove redundancy "ret = -1"
  Fix new typos in comments (found by codespell)
  slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stack
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Andreas's fixes to --enable-modules, two 2.1 regression fixes, and a
new qtest.  Michael sent a pull request of his own, so I dropped
the vhost changes.

# gpg: Signature made Fri 18 Jul 2014 14:30:34 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  Revert "kvmclock: Ensure time in migration never goes backward"
  Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation"
  module: Don't complain when a module is absent
  module: Simplify module_load()
  qtest: new test for wdt_ib700
  target-i386: Allow execute from user mode when SMEP is enabled.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Smatch also complains about 0 used for pointers, so replace those by
NULL in test-visitor-serialization.c, too.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This fixes a warning from the static code analysis (smatch).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Since QEMU 0.15, slirp (user mode networking) supports ping to the
Internet, see e6d43cfbSigned-off-by: NGernot Hillier <gernot.hillier@siemens.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

In this case, 'ret' is already '-1', so need not do it again.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>