This rearranges code in preparation for interrupt state
implementation.
Changes:
	- split up bus walk away from interrupt handling
          into a subroutine
	- change irq_state from an array to bitmask
	- verify that irq_state values are 0 or 1 on load

There are no functional changes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

Function mask is a mandatory feature in MSIX
spec so not implementing it is a spec violation.
Implement.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

rename ENABLE_OFFSET -> CONTROL_OFFSET, since
same byte includes function mask.
This is in preparation for function mask support.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Darwin/ppc64 does not use function descriptors,
adapt prologue and tcg_out_call accordingly.
GPR2 is available for general use, so let's use it.

http://developer.apple.com/mac/library/documentation/DeveloperTools/Conceptual/LowLevelABI/110-64-bit_PowerPC_Function_Calling_Conventions/64bitPowerPC.html

v2:
- Don't mark reserved GPR13 as callee-save.
- Move tcg_out_b up.
- Fix unused variable warning in prologue.
Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds information about who handles what when it comes to S390.
I'll gladly support anything that's related to the device emulation model and
S390 KVM parts.

Since this patchset doesn't implement S390 CPU emulation, I left that part
with a question mark. As soon as Uli's patchset gets committed I'd recommend
setting him there.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

All "normal" system emulation targets in qemu I'm aware of display output
on either VGA or serial output.

Our S390x virtio machine doesn't have such kind of legacy hardware. So
instead we need to default to a virtio console.

I'm not particularly proud of this patch. It would be a lot better to
have something in the machine description that tells us about the default
terminal.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In order to debug funny kernel breakages it's always good to have a working
gdb stub around.

While Uli's patches don't include one one, I needed one that's at least good
enough for 'bt' and some variable examinations during early bootup.

So here it is - the absolute basics to get the qemu gdb stub running with s390x
targets.
Sgined-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.

Let's add that machine description and be happy!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On S390x we don't want to go through the hassle of emulating real existing
hardware, because we don't need to for running Linux.

So let's instead implement a machine that is 100% based on VirtIO which we
fortunately implement already.

This patch implements the bus that is the groundwork for such an S390x
virtio machine.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Let's enable the basics for system emulation so we can run virtual machines
with KVM!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

KVM on S390x requires the virtual address space of the guest's RAM to be
within the first 256GB.

The general direction I'd like to see KVM on S390 move is that this requirement
is losened, but for now that's what we're stuck with.

So let's just hack up qemu_ram_alloc until KVM behaves nicely :-).
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

S390x was one of the first platforms that received support for KVM back in the
day. Unfortunately until now there hasn't been a qemu implementation that would
enable users to actually run guests.

So let's include support for KVM S390x in qemu!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Qemu won't let us run a KVM target without having host TCG support. Well, for
now we don't have any so let's implement a fake target that only stubs out
everything.

I tried to keep the patch as close to Uli's source as possible, so whenever
he feels like it he can easily diff his version against this one.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch makes configure aware of S390 hosts and guests. When not explicitly
defined using --target-list= no S390 targets will be built though.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Because Qemu currently requires a TCG target to exist and there are quite some
useful helpers here to lay the groundwork for out KVM target, let's create a
stub TCG emulation target for S390X CPUs.

This is required to make tcg happy. The emulation target itself won't work
though.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixes OpenBSD build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix mingw32 build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Partially fixes mingw32 build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This implements the audio control or volume read support as needed by
some systems. A Conectiva Parolin system required this to detect an IDE
device as CD-ROM, through the CDVOLREAD ioctl.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some PAGE constants were used instead of the macros we already have
defined in internal.h.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* buf was too small for longer register names.
* Use consistent upper case for nouns in register names.
* Use better name for array with e100 register names.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since commit a992fe3d
config-devices.h is no longer used.

So there is no need to keep the dependency rules
any longer.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This should avoid truncating the register name when debugging.
Signed-off-by: NDavid Benjamin <davidben@mit.edu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In mb_mod_length a return value is stored that is negative in error case. With
an unsigned type the check goes wrong.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Checking for nbytes < 0 is pointless as long as it's a size_t. If we want to
use negative numbers for error codes, we should use signed types.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch fixes the follow error when LSI_DEBUG is set.

  CC    libhw64/lsi53c895a.o
cc1: warnings being treated as errors
qemu/hw/lsi53c895a.c: In function 'lsi_io_mapfunc':
qemu/hw/lsi53c895a.c:1932: error: format '%08x' expects type 'unsigned int', but argument 2 has type 'pcibus_t'
qemu/hw/lsi53c895a.c: In function 'lsi_ram_mapfunc':
/qemu/hw/lsi53c895a.c:1947: error: format '%08x' expects type 'unsigned int', but argument 2 has type 'pcibus_t'
qemu/hw/lsi53c895a.c: In function 'lsi_mmio_mapfunc':
qemu/hw/lsi53c895a.c:1957: error: format '%08x' expects type 'unsigned int', but argument 2 has type 'pcibus_t'
make[1]: *** [lsi53c895a.o] Error 1
make: *** [subdir-libhw64] Error 2
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make using mingw32 on windows fails when running grep "=y$$".
The command is expanded to grep "=y$ and the missing "
results in an error.

I don't expect a file config-devices.mak with =y somewhere in
the middle of a line (they are always at the end of the line),
so simplifying the regular expression to =y seems to be permitted.

This avoids problems with wrong expansion.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make using mingw32 on windows does not preserve $@ in macros
when they are modified using this pattern:
target: macro += something

This behaviour results in an error when QEMU_CFLAGS containing
"-MMD -MP -MT $@" is modified for compilation of source files
which use SDL: $@ will expand to nothing, -MT no longer has
the correct argument (it will take the next one from the command
line) and the build will fail or run with a wrong command line.

The problem is fixed by using a new macro QEMU_DGFLAGS
which is not modified by a target rule.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A code review run by Steve Grubb complained about code in e1000.c:

In hw/e1000.c at line 89, vlan is declared to be 4 bytes.
At line 382 is an attempt to do a memmove over it with a size of 12.

This was fixed by splitting the memmove in two calls and
adding a comment to the declaration of vlan and data.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While trying to run -kernel with -bios pc-bios/pcbios.bin, I realized
that I was actually writing data to %es, but only set up %ds to a 32-bit
segment we want to write to.

So at the end of the day the data hasn't actually been copied. Oops.

So here's a fix to set ES instead of DS, which makes -kernel work with
BOCHS bios again (and actually makes the code do the correct thing)!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit 26a9e82a has the following flaws:

* It enabled DEBUG.

* It referenced two properties by the wrong name in
  usb_host_device_open(), which crashes with "qdev_prop_set: property
  "USB Host Device.bus" not found".

* It broke "-usbdevice host:auto:..." by calling parse_filter()
  incorrectly.

* It broke parsing of "-usbdevice host:BUS.ADDR" and "-usbdevice
  host:VID:PRID" with a trivial pasto.

* It broke wildcards in "-usbdevice host:auto:...".  Before, the four
  filter components were stored as int, and the wildcard was encoded
  as -1.  The faulty commit changed storage to uint32_t, and the
  wildcard encoding to 0.  But it failed to update parse_filter()
  accordingly.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Valid description taken from qemu-img.texi, although it would be better
to have this information recorded in only one place.
Signed-off-by: NPierre Riteau <Pierre.Riteau@irisa.fr>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>