All DisplayType values are just UI options that don't affect any
hardware emulation code, except for DT_NOGRAPHIC. Replace
DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off"
option, so hardware emulation code don't need to use the
display_type variable.

Cc: Michael Walle <michael@walle.cc>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

DT_NOGRAPHIC handling will be moved to a MachineState field, and
it will be easier to change milkymist_init() to check that field.

Cc: Michael Walle <michael@walle.cc>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This reduces the number of CONFIG_SPICE #ifdefs in vl.c.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This reduces the number of CONFIG_GTK #ifdefs in vl.c.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

One less #ifdef in vl.c.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This reduces the number of CONFIG_SDL #ifdefs in vl.c.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

One less #ifdef in vl.c.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This reduces the number of CONFIG_VNC #ifdefs in the vl.c code.

The only user-visible difference is that this will make QEMU
complain about syntax when using "-display vnc" ("VNC requires a
display argument vnc=<display>") even if CONFIG_VNC is disabled.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of reusing DT_SDL for Cocoa, use DT_COCOA to indicate
that a Cocoa display was requested.

configure already ensures CONFIG_COCOA and CONFIG_SDL are never
set at the same time. The only case where DT_SDL is used outside
a #ifdef CONFIG_SDL block is in the no_frame/alt_grab/ctrl_grab
check. That means the only user-visible change is that we will
start printing a warning if the SDL-specific options are used in
Cocoa mode. This is a bugfix, because no_frame/alt_grab/ctrl_grab
are not used by Cocoa code.

Cc: Andreas Färber <andreas.faerber@web.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of requiring a separate function for each VGA interface,
just enumerate the corresponding class names on struct
VGAInterfaceInfo.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of implementing separate check functions for each vga
interface type, add a table enumerating the possible VGA
interfaces.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of using exit(0), use exit(1) when an unavailable VGA
interface is used in the command-line to indicate it's an error.
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

correct comment and remove an unused macro. commit adcb4ee6
already correct its type
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

TCI does not need the runtime definition in exec-all.h.  It only needs the
host-side definitions in tcg/tcg.h.  Now that cpu.h is not included
everywhere, this caused a failure because exec-all.h does need cpu.h
but does not include it itself.

Fix by including the intended header.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1463745452-25831-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is not visible with the default "log" trace backend.  With other
backends however trace.h does not include qemu/log.h, resulting in
build failures.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1463745452-25831-2-git-send-email-pbonzini@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block layer patches

# gpg: Signature made Thu 19 May 2016 16:09:27 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (31 commits)
  qemu-iotests: Fix regression in 136 on aio_read invalid
  qemu-iotests: Simplify 109 with unaligned qemu-img compare
  qemu-io: Fix recent UI updates
  block: clarify error message for qmp-eject
  qemu-iotests: Some more write_zeroes tests
  qcow2: Fix write_zeroes with partially allocated backing file cluster
  qcow2: fix condition in is_zero_cluster
  block: Propagate AioContext change to all children
  block: Remove BlockDriverState.blk
  block: Don't return throttling info in query-named-block-nodes
  block: Avoid bs->blk in bdrv_next()
  block: Add bdrv_has_blk()
  block: Remove bdrv_aio_multiwrite()
  blockjob: Don't touch BDS iostatus
  blockjob: Don't set iostatus of target
  block: User BdrvChild callback for device name
  block: Use BdrvChild callbacks for change_media/resize
  block: Don't check throttled reqs in bdrv_requests_pending()
  Revert "block: Forbid I/O throttling on nodes with multiple parents for 2.6"
  block: Remove bdrv_move_feature_fields()
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches

# gpg: Signature made Thu May 19 16:58:53 2016 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* mreitz/tags/pull-block-for-kevin-2016-05-19:
  qemu-iotests: Fix regression in 136 on aio_read invalid
  qemu-iotests: Simplify 109 with unaligned qemu-img compare
  qemu-io: Fix recent UI updates
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 093ea232 removed the ability for aio_read and aio_write
to artificially inflate the invalid statistics counters for
block devices, since it no longer flags unaligned offset or
length.  Add 'aio_read -i' and 'aio_write -i' to restore
the ability, and update test 136 to use it.
Reported-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-id: 1463416983-28318-4-git-send-email-eblake@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

For some time now, qemu-img compare has been able to compare
unaligned images.  So we no longer need test 109's hack of
resizing to sector boundaries before invoking compare.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Message-id: 1463416983-28318-3-git-send-email-eblake@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Commit 770e0e0e [*] tried to add 'writev -f', but didn't tweak
the getopt() call to actually let it work.  Likewise, commit
c2e001cc missed implementing 'aio_write -u -z'.  The latter commit
also introduced a leak of ctx.

[*] does it sound "ech0e" in here? :)
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-id: 1463416983-28318-2-git-send-email-eblake@redhat.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

NEED_CPU_H cleanups, big enough to deserve their own pull request.

# gpg: Signature made Thu 19 May 2016 15:42:37 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (52 commits)
  hw: clean up hw/hw.h includes
  hw: remove pio_addr_t
  cpu: move exec-all.h inclusion out of cpu.h
  exec: extract exec/tb-context.h
  hw: explicitly include qemu/log.h
  mips: move CP0 functions out of cpu.h
  arm: move arm_log_exception into .c file
  qemu-common: push cpu.h inclusion out of qemu-common.h
  acpi: do not use TARGET_PAGE_SIZE
  s390x: reorganize CSS bits between cpu.h and other headers
  dma: do not depend on kvm_enabled()
  gdbstub: remove unnecessary includes from gdbstub-xml.c
  qemu-common: stop including qemu/host-utils.h from qemu-common.h
  qemu-common: stop including qemu/bswap.h from qemu-common.h
  cpu: move endian-dependent load/store functions to cpu-all.h
  hw: cannot include hw/hw.h from user emulation
  hw: move CPU state serialization to migration/cpu.h
  hw: do not use VMSTATE_*TL
  include: poison symbols in osdep.h
  apic: move target-dependent definitions to cpu.h
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If you use HMP's eject but the CDROM tray is locked, you may get a
confusing error message informing you that the "tray isn't open."

As this is the point of eject, we can do a little better and help
clarify that the tray was locked and that it (might) open up later,
so try again.

It's not ideal, but it makes the semantics of the (legacy) eject
command more understandable to end users when they try to use it.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This covers some more write_zeroes cases which are relevant for the
recent qcow2 optimisations that check the allocation status of the
backing file for partial cluster write_zeroes requests.

This needs to be separate from 034 because we can only support qcow2 in
this test case for multiple reasons: We check the allocation status
after write_zeroes with 'qemu-img map' and the optimised behaviour that
produces zero clusters is only implemented in qcow2; second, the map
command returns offsets that are qcow2 specific; and finally, we also
use 512 byte clusters which aren't supported for formats like qed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

In order to correctly check whether a given cluster is read as zero, we
don't only need to check whether bdrv_get_block_status_above() sets
BDRV_BLOCK_ZERO, but also if all sectors for the whole cluster have the
same status.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>

We should check for (res & BDRV_BLOCK_ZERO) only. The situation when we
will have !(res & BDRV_BLOCK_DATA) and will not have BDRV_BLOCK_ZERO is
not possible for images with bdi.unallocated_blocks_are_zero == true.

For those images where it's false, however, it can happen and we must
not consider the data zeroed then or we would corrupt the image.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Instead of propagating any change of a BDS's AioContext only to its file
and backing children and letting driver-specific code do the rest, just
propagate it to all and drop the thus superfluous implementations of
bdrv_{at,de}tach_aio_context() in Quorum, blkverify and VMDK.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch removes the remaining users of bs->blk, which will allow us
to have multiple BBs on top of a single BDS. In the meantime, all checks
that are currently in place to prevent the user from creating such
setups can be switched to bdrv_has_blk() instead of accessing BDS.blk.

Future patches can allow them and e.g. enable users to mirror to a block
device that already has a BlockBackend on it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

query-named-block-nodes should not return information that is related
to the attached BlockBackend rather than the node itself, so throttling
information needs to be removed from it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

We need to introduce a separate BdrvNextIterator struct that can keep
more state than just the current BDS in order to avoid using the bs->blk
pointer.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In many cases we just want to know whether a BDS has at least one BB
attached, without needing to know the exact BB that is attached. In
contrast to bs->blk, this is still a valid question when more than one
BB can be attached, so just answer it by checking the parents list.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Since virtio-blk implements request merging itself these days, the only
remaining users are test cases for the function. That doesn't make the
function exactly useful any more.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Block jobs don't actually make use of the iostatus for their BDSes, but
they manage a separate block job iostatus. Still, they require that it
is enabled for the source BDS and they enable it automatically for the
target and set the error handling mode - which ends up never being used
by the job.

This patch removes all of the BDS iostatus handling from the block job,
which removes another few bs->blk accesses.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

When block job errors were introduced, we assigned the iostatus of the
target BDS "just in case". The field has never been accessible for the
user because the target isn't listed in query-block.

Before we can allow the user to have a second BlockBackend on the
target, we need to clean this up. If anything, we would want to set the
iostatus for the internal BB of the job (which we can always do later),
but certainly not for a separate BB which the job doesn't even use.

As a nice side effect, this gets us rid of another bs->blk use.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

In order to get rid of bs->blk for bdrv_get_device_name() and
bdrv_get_device_or_node_name(), ask all parents for their name and
simply pick the first one.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

We want to get rid of BlockDriverState.blk in order to allow multiple
BlockBackends per BDS. Converting the device callbacks in block.c (which
assume a single BlockBackend) to per-child callbacks gets us rid of the
first few instances.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Checking whether there are throttled requests requires going to the
associated BlockBackend, which we want to avoid.

All users of bdrv_requests_pending() in block/io.c already call
bdrv_parent_drained_begin() first, which restarts all throttled
requests, so no throttled requests can be left here and this is removal
of dead code.

The remaining users (assertions during graph manipulation in block.c)
don't care about requests that are still queued in the BlockBackend and
haven't been issued for a BlockDriverState yet.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

This reverts commit 76b22320.

Now that I/O throttling is fully done on the BlockBackend level, there
is no reason any more to block I/O throttling for nodes with multiple
parents as the parents don't influence each other any more.

Conflicts:
	block.c
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

bdrv_move_feature_fields() and swap_feature_fields() are empty now, they
can be removed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

This moves the throttling related part of the BDS life cycle management
to BlockBackend. The throttling group reference is now kept even when no
medium is inserted.

With this commit, throttling isn't disabled and then re-enabled any more
during graph reconfiguration. This fixes the temporary breakage of I/O
throttling when used with live snapshots or block jobs that manipulate
the graph.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

So far, bdrv_parent_drained_begin/end() was called for the duration of
the actual bdrv_drain() at the beginning of a drained section, but we
really should keep parents quiesced until the end of the drained
section.

This does not actually change behaviour at this point because the only
user of the .drained_begin/end BdrvChildRole callback is I/O throttling,
which already doesn't send any new requests after flushing its queue in
.drained_begin. The patch merely removes a trap for future users.
Reported-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>