Document the restriction that format strings must begin and end with
double quotes.  This is for easy parsing since we don't run cpp over
trace-events.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Replace debug printf statements with tracepoints.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The regular expression to parse trace event definitions assumed the
format string would be a simple double-quoted string.  However, we now
use PRI?64 for portability which splits string literals.  The regular
expression can disregard the format string entirely since simpletrace.py
never needs to use it.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

snd_pcm_start() starts the capture process and ensures that the events
are delivered to the poll handler. Without the call, capture can be started
only when there is simultaneous playback running.
Signed-off-by: NJindrich Makovicka <makovick@gmail.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Playback control function did not disable polling when playback stops.
Caused busy spinning of the main loop due to unprocessed events.
Signed-off-by: NJindrich Makovicka <makovick@gmail.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

There was no warning if a bad trace event name was given to
'trace-event' command, thus the user could think that the command
was successful even if this was not the case.

Print a warning if the user tries to enable a trace event which is not
known.
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced a lot of warnings like:
/src/qemu/target-mips/translate.c: In function 'gen_ld':
/src/qemu/target-mips/translate.c:1039:17: error: variable 'opn' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the variable is not unused.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/target-ppc/op_helper.c: In function 'helper_icbi':
/src/qemu/target-ppc/op_helper.c:351:14: error: variable 'tmp' set but not used [-Werror=unused-but-set-variable]
/src/qemu/target-ppc/op_helper.c: In function 'do_6xx_tlb':
/src/qemu/target-ppc/op_helper.c:3805:28: error: variable 'EPN' set but not used [-Werror=unused-but-set-variable]
/src/qemu/target-ppc/op_helper.c: In function 'do_74xx_tlb':
/src/qemu/target-ppc/op_helper.c:3838:28: error: variable 'EPN' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the variable is not unused. Delete tmp.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/target-i386/op_helper.c: In function 'switch_tss':
/src/qemu/target-i386/op_helper.c:283:53: error: variable 'new_trap' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the variable is not unused. Add also
pointer to docs.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/ui/vnc.c: In function 'vnc_client_cache_auth':
/src/qemu/ui/vnc.c:217:12: error: variable 'qdict' set but not used [-Werror=unused-but-set-variable]
/src/qemu/ui/vnc.c: In function 'vnc_display_open':
/src/qemu/ui/vnc.c:2526:9: error: variable 'acl' set but not used [-Werror=unused-but-set-variable]

Fix by making the variable declarations and their uses also conditional
to debug definition.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced a warning:
In file included from /src/qemu/target-cris/translate.c:3154:0:
/src/qemu/target-cris/translate_v10.c: In function 'dec10_prep_move_m':
/src/qemu/target-cris/translate_v10.c:111:22: error: variable 'rd' set but not used [-Werror=unused-but-set-variable]

Fix by deleting rd, adjust the only user.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced warnings like:
/src/qemu/net/tap-win32.c: In function 'tap_win32_open':
/src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable]

Fix by removing the unused variables.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.

Remove video.x MoL hacks.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced a warning:
/src/qemu/hw/lsi53c895a.c: In function 'lsi_do_msgout':
/src/qemu/hw/lsi53c895a.c:848:9: error: variable 'len' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the variable is not unused for
non-debug case.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/hw/eepro100.c: In function 'eepro100_read4':
/src/qemu/hw/eepro100.c:1351:14: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]
/src/qemu/hw/eepro100.c: In function 'eepro100_read2':
/src/qemu/hw/eepro100.c:1328:14: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]
/src/qemu/hw/eepro100.c: In function 'eepro100_read1':
/src/qemu/hw/eepro100.c:1285:13: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]

Fix by initializing 'val' at start.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced a lot of warnings like:
In file included from /src/qemu/hw/cirrus_vga_rop.h:174:0,
                 from /src/qemu/hw/cirrus_vga.c:284:
/src/qemu/hw/cirrus_vga_rop2.h: In function 'cirrus_patternfill_0_8':
/src/qemu/hw/cirrus_vga_rop2.h:48:18: error: variable 'col' set but not used [-Werror=unused-but-set-variable]
/src/qemu/hw/cirrus_vga_rop2.h: In function 'cirrus_colorexpand_transp_0_8':
/src/qemu/hw/cirrus_vga_rop2.h:104:18: error: variable 'col' set but not used [-Werror=unused-but-set-variable]

Fix the warnings by introducing an inline function, which avoids
exposing write-only variables.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compiling with GCC 4.6.0 20100925 produced a warning:
/src/qemu/block/qcow2-refcount.c: In function 'update_refcount':
/src/qemu/block/qcow2-refcount.c:552:13: error: variable 'dummy' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the result is not unused.
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

'make clean' did not remove trace.[ch]-timestamp files,
only trace.[ch]. But 'make' did not know how to make trace.[ch]
files if the timestamp files were present.

Fix by removing the timestamp files along with trace.[ch].
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

pkg-config is not always available (e.g. on win32 hosts),
but we don't want to see the 'command not found' error message.

Redirect stdout and stderr to /dev/null.

v2:

* Removed changes which should not have been here.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Win32 does not support line-buffering, but it allows
unbuffered output.

Unbuffered output is a good approximation. For typical output
statements which usually end with '\n', it's even identical.

Buffered output is unusable for program traces because of
its large delay.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Timestamp files were recently added to reduce make churn on source files
that use tracing.  The timestamp files should never be committed and
should not be visible in git status.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit d729bb9a has a typo, causing an
infinite loop in acpi_table_add.
Signed-off-by: NVincent Minet <vincent@vincent-minet.net>
Acked-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

_GNU_SOURCE is already defined in QEMU_CFLAGS which
is passed to gcc in shell function compile_prog.

Removing the definition from several checks avoids compiler warnings
(which are now written to config.log).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This fixes an observed failure to detect madvise() on Linux.

To avoid similar issues, all other tests that use NULL but don't already
have stddef.h (or another header that is defined to provide NULL,
such as stdio.h, unistd.h, or time.h) are also fixed.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Observing block layer aio readv/writev operations is useful for
debugging image formats or understanding guest disk I/O patterns.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The LTTng UserSpace Tracer formerly used TPPROTO() and TPARGS() instead
of TP_PROTO() and TP_ARGS() like the kernel uses.  This has been changed
so QEMU needs to follow.

I am not aware of a graceful way of making the transition but since no
one complained that the UST build is broken, it should be fine to just
switch over without compatibility for old UST headers.  The newer UST
headers are shipping in distro packages so it is realistic to make this
change now.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Although comment lines must be skipped, the '#' character can occur in
valid format strings.  Be more careful when checking for comments.
Leave comments at the end of the line where they will not interfere with
other processing.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It is not portable to use "%ld" for int64_t because int64_t may have
type long on 64-bit platforms and long long on 32-bit platforms.  Use
the standard library PRId64 macros to keep format strings portable.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When updating the guest TLB we only need to flush previous
mappings from the entry written if the entry was valid.

Also fixes a compiler warning reported by Blue Swirl.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

fix up errors returned to include errno, not just -1
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When using irqfd with vhost-net to inject interrupts,
a single evenfd might inject multiple interrupts.
Implementing this is much easier with a single
per-device callback to set guest notifiers.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

I reviewed the latest sources of Linux, FreeBSD and NetBSD.
They all reset the multiple IA bit (multi_ia in BSD) to zero,
but I did not find code which sets this bit to one
(like it is done by some routers).

Running Windows guests also did not set this bit.

Intel's Open Source Software Developer Manual does not
give much information on the semantics related to this bit,
so I had to guess how it works. The guess was good enough
to make the router emulation work.

Related changes in this patch:
* Update naming and documentation of the internal hash register.
  It is not limited to multicast, but also used for multiple IA.
* Dump complete configuration register when debug traces are enabled.
* Debug output when multiple IA bit is set during CmdConfigure.
* Debug output when frames are received because multiple IA bit is set,
  or when they are ignored although it is set.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Move all of vhost-net start/stop logic to a single routine,
and call it from everywhere.

Additionally, start/stop vhost-net on link up/down:
we should not transmit anything if user asked us to
put the link down.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>

As status is set to 0 on reset, invoke the relevant callback. This makes
for a cleaner code in devices as they don't need to duplicate the code
in their reset routine, as well as excercises this path a little more.

In particular this makes it possible to unify
vhost-net handling code with the following patch.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

With -netdev, virtio devices present offload
features to guest, depending on the backend used.
Thus, removing host netdev peer while guest is
active leads to guest-visible inconsistency and/or crashes.

As a solution, while guest (NIC) peer device exists,
we prevent the host peer from being deleted.
This patch does this by adding peer_deleted flag in nic state:
if host device is going away while guest device
is around, set this flag and keep a shell of
the host device around for as long as guest device exists.

The link is put down so all packets will get discarded.

At the moment, management can detect that device deletion
is delayed by doing info net. As a next step, we shall add
commands that control hotplug/unplug without
removing the device, and an event to report that
guest has responded to the hotplug event.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>

Conflicts:
	configure
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Replace m86k_sim_stat by m68k_sim_stat.

Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>

multifuction -> multifunction
successfull -> successful.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>