- 16 6月, 2016 28 次提交
-
-
由 Kevin Wolf 提交于
linux-aio uses a BH in order to make sure that the remaining completions are processed even in nested event loops of completion callbacks in order to avoid deadlocks. There is no need, however, to have the BH overhead for the first call into qemu_laio_completion_bh() or after all pending completions have already been processed. Therefore, this patch calls directly into qemu_laio_completion_bh() in qemu_laio_completion_cb() and cancels the BH after qemu_laio_completion_bh() has processed all pending completions. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Kevin Wolf 提交于
If block drivers say that they can do an alignment < 512 bytes, let's just suppose they mean it. raw-posix used to be an offender with respect to this, but it can actually deal with byte-aligned requests now. The default is still 512 bytes for any drivers that only implement sector-based interfaces, but it is 1 now for drivers that implement .bdrv_co_preadv. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
The raw-posix block driver actually supports byte-aligned requests now on non-O_DIRECT images, like it already (and previously incorrectly) claimed in bs->request_alignment. For some block drivers this means that a RMW cycle can be avoided when they write sub-sector metadata e.g. for cluster allocation. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
In order to use the modern byte-based .bdrv_co_preadv/pwritev() interface, this patch switches raw-posix to coroutine-based interfaces as a first step. In terms of semantics and performance, it doesn't make a difference with the existing code whether we go from a coroutine to a callback-based interface already in block/io.c or only in linux-aio.c As there have been concerns in the past that this change may be a step in the wrong direction with respect to a possible AIO fast path, the old callback-based interface for linux-aio is left around and can be reactivated when a fast path (e.g. directly from virtio-blk dataplane, bypassing the whole block layer) is implemented. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
This patch makes bdrv_aligned_preadv() ready to accept byte-aligned requests. Note that this doesn't mean that such requests are actually made. The caller still ensures that all requests are aligned to at least 512 bytes. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
In a first step to convert the common I/O path to work on bytes rather than sectors, this converts the copy-on-read logic that is used by bdrv_aligned_preadv(). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Daniel P. Berrange 提交于
Back in the 2.3.0 release we declared qcow[2] encryption as deprecated, warning people that it would be removed in a future release. commit a1f688f4 Author: Markus Armbruster <armbru@redhat.com> Date: Fri Mar 13 21:09:40 2015 +0100 block: Deprecate QCOW/QCOW2 encryption The code still exists today, but by a (happy?) accident we entirely broke the ability to use qcow[2] encryption in the system emulators in the 2.4.0 release due to commit 8336aafa Author: Daniel P. Berrange <berrange@redhat.com> Date: Tue May 12 17:09:18 2015 +0100 qcow2/qcow: protect against uninitialized encryption key This commit was designed to prevent future coding bugs which might cause QEMU to read/write data on an encrypted block device in plain text mode before a decryption key is set. It turns out this preventative measure was a little too good, because we already had a long standing bug where QEMU read encrypted data in plain text mode during system emulator startup, in order to guess disk geometry: Thread 10 (Thread 0x7fffd3fff700 (LWP 30373)): #0 0x00007fffe90b1a28 in raise () at /lib64/libc.so.6 #1 0x00007fffe90b362a in abort () at /lib64/libc.so.6 #2 0x00007fffe90aa227 in __assert_fail_base () at /lib64/libc.so.6 #3 0x00007fffe90aa2d2 in () at /lib64/libc.so.6 #4 0x000055555587ae19 in qcow2_co_readv (bs=0x5555562accb0, sector_num=0, remaining_sectors=1, qiov=0x7fffffffd260) at block/qcow2.c:1229 #5 0x000055555589b60d in bdrv_aligned_preadv (bs=bs@entry=0x5555562accb0, req=req@entry=0x7fffd3ffea50, offset=offset@entry=0, bytes=bytes@entry=512, align=align@entry=512, qiov=qiov@entry=0x7fffffffd260, flags=0) at block/io.c:908 #6 0x000055555589b8bc in bdrv_co_do_preadv (bs=0x5555562accb0, offset=0, bytes=512, qiov=0x7fffffffd260, flags=<optimized out>) at block/io.c:999 #7 0x000055555589c375 in bdrv_rw_co_entry (opaque=0x7fffffffd210) at block/io.c:544 #8 0x000055555586933b in coroutine_thread (opaque=0x555557876310) at coroutine-gthread.c:134 #9 0x00007ffff64e1835 in g_thread_proxy (data=0x5555562b5590) at gthread.c:778 #10 0x00007ffff6bb760a in start_thread () at /lib64/libpthread.so.0 #11 0x00007fffe917f59d in clone () at /lib64/libc.so.6 Thread 1 (Thread 0x7ffff7ecab40 (LWP 30343)): #0 0x00007fffe91797a9 in syscall () at /lib64/libc.so.6 #1 0x00007ffff64ff87f in g_cond_wait (cond=cond@entry=0x555555e085f0 <coroutine_cond>, mutex=mutex@entry=0x555555e08600 <coroutine_lock>) at gthread-posix.c:1397 #2 0x00005555558692c3 in qemu_coroutine_switch (co=<optimized out>) at coroutine-gthread.c:117 #3 0x00005555558692c3 in qemu_coroutine_switch (from_=0x5555562b5e30, to_=to_@entry=0x555557876310, action=action@entry=COROUTINE_ENTER) at coroutine-gthread.c:175 #4 0x0000555555868a90 in qemu_coroutine_enter (co=0x555557876310, opaque=0x0) at qemu-coroutine.c:116 #5 0x0000555555859b84 in thread_pool_completion_bh (opaque=0x7fffd40010e0) at thread-pool.c:187 #6 0x0000555555859514 in aio_bh_poll (ctx=ctx@entry=0x5555562953b0) at async.c:85 #7 0x0000555555864d10 in aio_dispatch (ctx=ctx@entry=0x5555562953b0) at aio-posix.c:135 #8 0x0000555555864f75 in aio_poll (ctx=ctx@entry=0x5555562953b0, blocking=blocking@entry=true) at aio-posix.c:291 #9 0x000055555589c40d in bdrv_prwv_co (bs=bs@entry=0x5555562accb0, offset=offset@entry=0, qiov=qiov@entry=0x7fffffffd260, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:591 #10 0x000055555589c503 in bdrv_rw_co (bs=bs@entry=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:614 #11 0x000055555589c562 in bdrv_read_unthrottled (nb_sectors=21845, buf=0x7fffffffd2e0 "\321,", sector_num=0, bs=0x5555562accb0) at block/io.c:622 #12 0x000055555589c562 in bdrv_read_unthrottled (bs=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845) at block/io.c:634 nb_sectors@entry=1) at block/block-backend.c:504 #14 0x0000555555752e9f in guess_disk_lchs (blk=blk@entry=0x5555562a5290, pcylinders=pcylinders@entry=0x7fffffffd52c, pheads=pheads@entry=0x7fffffffd530, psectors=psectors@entry=0x7fffffffd534) at hw/block/hd-geometry.c:68 #15 0x0000555555752ff7 in hd_geometry_guess (blk=0x5555562a5290, pcyls=pcyls@entry=0x555557875d1c, pheads=pheads@entry=0x555557875d20, psecs=psecs@entry=0x555557875d24, ptrans=ptrans@entry=0x555557875d28) at hw/block/hd-geometry.c:133 #16 0x0000555555752b87 in blkconf_geometry (conf=conf@entry=0x555557875d00, ptrans=ptrans@entry=0x555557875d28, cyls_max=cyls_max@entry=65536, heads_max=heads_max@entry=16, secs_max=secs_max@entry=255, errp=errp@entry=0x7fffffffd5e0) at hw/block/block.c:71 #17 0x0000555555799bc4 in ide_dev_initfn (dev=0x555557875c80, kind=IDE_HD) at hw/ide/qdev.c:174 #18 0x0000555555768394 in device_realize (dev=0x555557875c80, errp=0x7fffffffd640) at hw/core/qdev.c:247 #19 0x0000555555769a81 in device_set_realized (obj=0x555557875c80, value=<optimized out>, errp=0x7fffffffd730) at hw/core/qdev.c:1058 #20 0x00005555558240ce in property_set_bool (obj=0x555557875c80, v=<optimized out>, opaque=0x555557875de0, name=<optimized out>, errp=0x7fffffffd730) at qom/object.c:1514 #21 0x0000555555826c87 in object_property_set_qobject (obj=obj@entry=0x555557875c80, value=value@entry=0x55555784bcb0, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/qom-qobject.c:24 #22 0x0000555555825760 in object_property_set_bool (obj=obj@entry=0x555557875c80, value=value@entry=true, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/object.c:905 #23 0x000055555576897b in qdev_init_nofail (dev=dev@entry=0x555557875c80) at hw/core/qdev.c:380 #24 0x0000555555799ead in ide_create_drive (bus=bus@entry=0x555557629630, unit=unit@entry=0, drive=0x5555562b77e0) at hw/ide/qdev.c:122 #25 0x000055555579a746 in pci_ide_create_devs (dev=dev@entry=0x555557628db0, hd_table=hd_table@entry=0x7fffffffd830) at hw/ide/pci.c:440 #26 0x000055555579b165 in pci_piix3_ide_init (bus=<optimized out>, hd_table=0x7fffffffd830, devfn=<optimized out>) at hw/ide/piix.c:218 #27 0x000055555568ca55 in pc_init1 (machine=0x5555562960a0, pci_enabled=1, kvmclock_enabled=<optimized out>) at /home/berrange/src/virt/qemu/hw/i386/pc_piix.c:256 #28 0x0000555555603ab2 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4249 So the safety net is correctly preventing QEMU reading cipher text as if it were plain text, during startup and aborting QEMU to avoid bad usage of this data. For added fun this bug only happens if the encrypted qcow2 file happens to have data written to the first cluster, otherwise the cluster won't be allocated and so qcow2 would not try the decryption routines at all, just return all 0's. That no one even noticed, let alone reported, this bug that has shipped in 2.4.0, 2.5.0 and 2.6.0 shows that the number of actual users of encrypted qcow2 is approximately zero. So rather than fix the crash, and backport it to stable releases, just go ahead with what we have warned users about and disable any use of qcow2 encryption in the system emulators. qemu-img/qemu-io/qemu-nbd are still able to access qcow2 encrypted images for the sake of data conversion. In the future, qcow2 will gain support for the alternative luks format, but when this happens it'll be using the '-object secret' infrastructure for getting keys, which avoids this problematic scenario entirely. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Add a new BDRV_REQ_MASK constant, and use it to make sure that caller flags are always valid. Tested with 'make check' and with qemu-iotests on both '-raw' and '-qcow2'; the only failure turned up was fixed in the previous commit. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Commit e253f4b8 converted mirroring from sector-based bdrv_aio_* to byte-based blk_aio_*, but failed to account for the subtle difference in signatures (the former takes a semi-redundant length, the latter takes a flags parameter). Since all of our flags are currently smaller in size than BDRV_SECTOR_SIZE, it has no ill effects until we either perform sub-sector mirroring, or we start asserting that no unexpected flags are set. I found it while testing new asserts when qemu-iotests 132 started warning about an unknown flag 0x200000. Signed-off-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
If no -t option is specified, bool writethrough stayed uninitialised. Initialise it as false, which makes cache=writeback the default cache mode. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Cédric Le Goater 提交于
commit 243e6f69 ("m25p80: Switch to byte-based block access") replaced blk_read() calls with blk_pread() but return values are different. Signed-off-by: NCédric Le Goater <clg@kaod.org> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
Acquire aio context before run command, this is mandatory for unit tests. Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> CC: Kevin Wolf <kwolf@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Colin Lord 提交于
When opening a device with a locked tray, gives an error explaining the device tray is locked and that the user should wait and try again. This is less confusing than the previous error, which simply stated that the tray was locked. Signed-off-by: NColin Lord <clord@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
This changes qcow2 to implement the byte-based .bdrv_co_pwritev interface rather than the sector-based old one. As preallocation uses the same allocation function as normal writes, and the interface of that function needs to be changed, it is converted in the same patch. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
In preparation for implementing .bdrv_co_pwritev in qcow2. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
This will allow copy on write operations where the overwritten part of the cluster is not aligned to sector boundaries. Also rename the function because it has nothing to do with sectors any more. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
Reading from qcow2 images is now byte granularity. Most of the affected code in qcow2 actually gets simpler with this change. The only exception is encryption, which is fixed on 512 bytes blocks; in order to keep this working, bs->request_alignment is set for encrypted images. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Kevin Wolf 提交于
This patch changes the units that qcow2_get_cluster_offset() uses internally, without touching the interface just yet. This will be done in another patch. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Peter Maydell 提交于
Migration: - Fixes for TLS series - Postcopy: Add stats, fix, test case # gpg: Signature made Thu 16 Jun 2016 05:40:09 BST # gpg: using RSA key 0xEB0B4DFC657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" # Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6 # Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670 * remotes/amit-migration/tags/migration-for-2.7-4: migration: rename functions to starting migrations migration: fix typos in qapi-schema from latest migration additions Postcopy: Check for support when setting the capability tests: fix libqtest socket timeouts test: Postcopy Postcopy: Add stats on page requests Migration: Split out ram part of qmp_query_migrate Postcopy: Avoid 0 length discards Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrange 提交于
Apply the following renames for starting incoming migration: process_incoming_migration -> migration_fd_process_incoming migration_set_incoming_channel -> migration_channel_process_incoming migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming and for starting outgoing migration: migration_set_outgoing_channel -> migration_channel_connect migration_tls_set_outgoing_channel -> migration_tls_channel_connect Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Daniel P. Berrange 提交于
Recent migration QAPI enhancements had a few spelling mistakes and also incorrect version number in a few places. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1464776234-9910-2-git-send-email-berrange@redhat.com Message-Id: <1464776234-9910-2-git-send-email-berrange@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
Knowing whether the destination host supports migration with postcopy can be tricky. The destination doesn't need the capability set, however if we set it then use the opportunity to do the test and tell the user/management layer early. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Andrea Arcangeli 提交于
I kept getting timeouts and unix socket accept failures under high load, the patch fixes it. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Message-id: 1465816605-29488-6-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-6-git-send-email-dgilbert@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
This is a postcopy test (x86 only) that actually runs the guest and checks the memory contents. The test runs from an x86 boot block with the hex embedded in the test; the source for this is: ........... .code16 .org 0x7c00 .file "fill.s" .text .globl start .type start, @function start: # at 0x7c00 ? cli lgdt gdtdesc mov $1,%eax mov %eax,%cr0 # Protected mode enable data32 ljmp $8,$0x7c20 .org 0x7c20 .code32 # A20 enable - not sure I actually need this inb $0x92,%al or $2,%al outb %al, $0x92 # set up DS for the whole of RAM (needed on KVM) mov $16,%eax mov %eax,%ds mov $65,%ax mov $0x3f8,%dx outb %al,%dx # bl keeps a counter so we limit the output speed mov $0, %bl mainloop: # Start from 1MB mov $(1024*1024),%eax innerloop: incb (%eax) add $4096,%eax cmp $(100*1024*1024),%eax jl innerloop inc %bl jnz mainloop mov $66,%ax mov $0x3f8,%dx outb %al,%dx jmp mainloop # GDT magic from old (GPLv2) Grub startup.S .p2align 2 /* force 4-byte alignment */ gdt: .word 0, 0 .byte 0, 0, 0, 0 /* -- code segment -- * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present * type = 32bit code execute/read, DPL = 0 */ .word 0xFFFF, 0 .byte 0, 0x9A, 0xCF, 0 /* -- data segment -- * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present * type = 32 bit data read/write, DPL = 0 */ .word 0xFFFF, 0 .byte 0, 0x92, 0xCF, 0 gdtdesc: .word 0x27 /* limit */ .long gdt /* addr */ /* I'm a bootable disk */ .org 0x7dfe .byte 0x55 .byte 0xAA ........... and that can be assembled by the following magic: as --32 -march=i486 fill.s -o fill.o objcopy -O binary fill.o fill.boot dd if=fill.boot of=bootsect bs=256 count=2 skip=124 xxd -i bootsect Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Message-id: 1465816605-29488-5-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-5-git-send-email-dgilbert@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
On the source, add a count of page requests received from the destination. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NDenis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
The RAM section of qmp_query_migrate is reasonably complex and repeated 3 times. Split it out into a helper. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com Reviwed-by: NDenis V. Lunev <den@openvz.org> Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
The discard code in migration/ram.c would send request for zero length discards in the case where no discards were needed. It doesn't appear to have had any bad effect. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NDenis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com> Signed-off-by: NAmit Shah <amit.shah@redhat.com>
-
- 15 6月, 2016 10 次提交
-
-
由 Peter Maydell 提交于
X86 queue, 2016-06-14 (v2) # gpg: Signature made Tue 14 Jun 2016 22:29:04 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-pull-request: target-i386: Consolidate calls of object_property_parse() in x86_cpu_parse_featurestr target-i386: Use cpu_generic_init() in cpu_x86_init() target-i386: Move xcc->kvm_required check to realize time target-i386: Remove assert(kvm_enabled()) from host_x86_cpu_initfn() target-i386: Move features logic that requires CPUState to realize time target-i386: Remove xlevel & hv-spinlocks option fixups target-i386: Implement CPUID[0xB] (Extended Topology Enumeration) pc: Add 2.7 machine target-i386: add Skylake-Client cpu model Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Eduardo Habkost 提交于
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Igor Mammedov 提交于
Now cpu_x86_init() does nothing more or less than duplicating cpu_generic_init() logic. So simplify it by using cpu_generic_init(). Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Igor Mammedov 提交于
It will allow to drop custom cpu_x86_init() and use cpu_generic_init() instead, reducing cpu_x86_create() to a simple 3-liner. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
The code will be changed to allow creation of the CPU object and report kvm_required errors only at realizefn, so we need to make the instance_init function more flexible. Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Igor Mammedov 提交于
Making x86_cpu_parse_featurestr() a pure convertor of legacy feature string into global properties, needs it to be called before a CPU instance is created so parser shouldn't modify CPUState directly or access it at all. Hence move current hack that directly pokes into CPUState, to set/unset +-feats, from parser to CPU's realize method. Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
The "fixup will be removed in future versions" warnings are present since QEMU 1.7.0, at least, so users should have fixed their scripts and configurations, already. In the case of libvirt users, libvirt doesn't use the "xlevel" option, and already rejects HyperV spinlock retry count < 0xFFF. Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Radim Krčmář 提交于
I looked at a dozen Intel CPU that have this CPUID and all of them always had Core offset as 1 (a wasted bit when hyperthreading is disabled) and Package offset at least 4 (wasted bits at <= 4 cores). QEMU uses more compact IDs and it doesn't make much sense to change it now. I keep the SMT and Core sub-leaves even if there is just one thread/core; it makes the code simpler and there should be no harm. Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Igor Mammedov 提交于
Signed-off-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
Introduce Skylake-Client cpu mode which inherits the features from Broadwell and supports some additional features that are: MPX, XSAVEC, and XGETBV1. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 14 6月, 2016 2 次提交
-
-
由 Peter Maydell 提交于
Xen 2016/06/14 # gpg: Signature made Tue 14 Jun 2016 16:01:52 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20160614-tag: xen: Clean up includes xen/blkif: avoid double access to any shared ring request fields Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
target-arm queue: * add PMU support for virt machine under KVM * fix reset and migration of TTBCR(S) * add virt-2.7 machine type * QOMify various ARM devices * implement xilinx DisplayPort device * don't permit ARMv8-only Neon insns to work on ARMv7 # gpg: Signature made Tue 14 Jun 2016 16:01:45 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20160614-2: (30 commits) target-arm: Don't permit ARMv8-only Neon insns on ARMv7 arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma introduce xlnx-dp introduce xlnx-dpdma hw/i2c-ddc.c: Implement DDC I2C slave introduce dpcd module introduce aux-bus i2c: Factor our send() and recv() common logic i2c: implement broadcast write i2cbus: remove unused dev field hw/sd: QOM'ify pl181.c hw/dma: QOM'ify pxa2xx_dma.c hw/misc: QOM'ify mst_fpga.c hw/misc: QOM'ify exynos4210_pmu.c hw/misc: QOM'ify arm_l2x0.c hw/gpio: QOM'ify zaurus.c hw/gpio: QOM'ify pl061.c hw/gpio: QOM'ify omap_gpio.c hw/i2c: QOM'ify versatile_i2c.c hw/i2c: QOM'ify omap_i2c.c ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-