add MSA VEC/2R format instructions
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA 3RF format instructions
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA ELM format instructions
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA 3R format instructions
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA BIT format instructions
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA I5 format instructions
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA I8 format instructions
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA branch instructions
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add msa_helper.c
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add msa_reset() and global msa register (d type only)
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA opcode enum
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

stop translation as ctc1 instruction can change hflags
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Remove the duplicated ieee_rm in gdbstub.c.
Make the other ieee_rm and ieee_ex_to_mips available to other files.
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add MSA exceptions
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

add defines and data structure for MIPS SIMD Architecture
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Release 6 limits the number of cases where software can cause UNDEFINED or
UNPREDICTABLE behaviour. In this case, when accessing reserved / unimplemented
CP0 register, writes are ignored and reads return 0.

In pre-R6 the behaviour is not specified, but generating RI exception is not
what the real HW does.

Additionally, remove CP0 Random register as it became reserved in Release 6.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

In Release 6 not all the values are allowed to be written to a register.
If the value is not valid or unsupported then it should stay unchanged.

For pre-R6 the existing behaviour has been changed only for CP0_Index register
as the current implementation does not seem to be correct - it looks like it
tries to limit the input value but the limit is higher than the actual
number of tlb entries.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

When conditional compact branch is encountered decode one more instruction in
current translation block - that will be forbidden slot. Instruction in
forbidden slot will be executed only if conditional compact branch is not taken.

Any control transfer instruction (CTI) which are branches, jumps, ERET,
DERET, WAIT and PAUSE will generate RI exception if executed in forbidden or
delay slot.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

SDBBP instruction Reserved Instruction control. The purpose of this field is
to restrict availability of SDBBP to kernel mode operation.

If the bit is set then SDBBP instruction can only be executed in kernel mode.
User execution of SDBBP will cause a Reserved Instruction exception.

Additionally add missing Config4 and Config5 cases for dm{f,t}c0.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

BadInstr Register (CP0 Register 8, Select 1)
The BadInstr register is a read-only register that capture the most recent
instruction which caused an exception.

BadInstrP Register (CP0 Register 8, Select 2)
The BadInstrP register contains the prior branch instruction, when the
faulting instruction is in a branch delay slot.

Using error_code to indicate whether AdEL or TLBL was triggered during
instruction fetch, in this case BadInstr is not updated as valid instruction
word is not available.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

For Standard TLB configuration (Config.MT=1):

TLBINV invalidates a set of TLB entries based on ASID. The virtual address is
ignored in the entry match. TLB entries which have their G bit set to 1 are not
modified.

TLBINVF causes all entries to be invalidated.

Single TLB entry can be marked as invalid on TLB entry write by having
EntryHi.EHINV set to 1.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

An Execute-Inhibit exception occurs when the virtual address of an instruction
fetch matches a TLB entry whose XI bit is set. This exception type can only
occur if the XI bit is implemented within the TLB and is enabled, this is
denoted by the PageGrain XIE bit.

An Read-Inhibit exception occurs when the virtual address of a memory load
reference matches a TLB entry whose RI bit is set. This exception type can
only occur if the RI bit is implemented within the TLB and is enabled, this is
denoted by the PageGrain RIE bit.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

PageGrain needs rw bitmask which differs between MIPS architectures.
In pre-R6 if RIXI is supported, PageGrain.XIE and PageGrain.RIE are writeable,
whereas in R6 they are read-only 1.

On MIPS64 mtc0 instruction left shifts bits 31:30 for MIPS32 backward
compatiblity, therefore there are separate mtc0 and dmtc0 helpers.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

In Revision 3 of the architecture, the RI and XI bits were added to the TLB
to enable more secure access of memory pages. These bits (along with the Dirty
bit) allow the implementation of read-only, write-only, no-execute access
policies for mapped pages.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

New MIPS features depend on the access type and enum is more convenient than
using the numbers directly.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>

KScratch<n> Registers (CP0 Register 31, Selects 2 to 7)

The KScratch registers are read/write registers available for scratch pad
storage by kernel mode software. They are 32-bits in width for 32-bit
processors and 64-bits for 64-bit processors.

CP0Config4.KScrExist[2:7] bits indicate presence of CP0_KScratch1-6 registers.
For Release 6, all KScratch registers are required.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>
Reviewed-by: NYongbok Kim <yongbok.kim@imgtec.com>

Commit 9d8bf2d1 moved the softmmu slow path out of line and introduce a
regression at the same time by always calling tcg_out_tlb_load with
is_load=1. This makes impossible to run any significant code under
qemu-system-mips*.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* remotes/sstabellini/xen-2014-10-30:
  fix off-by-one error in pci_piix3_xen_ide_unplug
  xen-hvm.c: Add support for Xen access to vmport
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vmware-vga: add rectangle verification (CVE-2014-3689)

# gpg: Signature made Wed 29 Oct 2014 11:45:29 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-cve-2014-3689-20141029-1:
  vmware-vga: use vmsvga_verify_rect in vmsvga_fill_rect
  vmware-vga: use vmsvga_verify_rect in vmsvga_copy_rect
  vmware-vga: use vmsvga_verify_rect in vmsvga_update_rect
  vmware-vga: add vmsvga_verify_rect
  vmware-vga: CVE-2014-3689: turn off hw accel
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

vnc: return directly if no vnc client connected
vnc: sanitize bits_per_pixel from the client (CVE-2014-7815)

# gpg: Signature made Tue 28 Oct 2014 10:52:31 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20141028-1:
  vnc: return directly if no vnc client connected
  vnc: sanitize bits_per_pixel from the client
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fixes for libcacard (usb smartcard emulation), xhci and uhci.

# gpg: Signature made Tue 28 Oct 2014 10:39:52 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20141028-1:
  uhci: remove useless DEBUG
  xhci: add property to turn on/off streams support
  libcacard: don't free sign buffer while sign op is pending
  libcacard: Lock NSS cert db when selecting an applet on an emulated card
  libcacard: introduce new vcard_emul_logout
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

gtk: fix two warnings with gtk 3.14+

# gpg: Signature made Tue 28 Oct 2014 10:25:52 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-gtk-20141028-1:
  gtk: avoid gd_widget_reparent with gtk 3.14+
  gtk: drop gtk_widget_set_double_buffered call
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix off-by-one error when unplugging disks, which would otherwise leave the last ATA disk plugged, with obvious consequences. Also rewrite loop to be more readable.
Signed-off-by: NJames Harper <james.harper@ejbdigital.com.au>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

This adds synchronisation of the 6 vcpu registers (only 32bits of
them) that vmport.c needs between Xen and QEMU.

This is to avoid a 2nd and 3rd exchange between QEMU and Xen to
fetch and put these 6 vcpu registers used by the code in vmport.c
and vmmouse.c

The registers are passed in the new shared page provided by
HVM_PARAM_VMPORT_REGS_PFN.

Add new array to XenIOState that allows selection of current_cpu by
vcpu id.

Now pass XenIOState to handle_ioreq().

Add new routines regs_to_cpu(), regs_from_cpu(), and
handle_vmport_ioreq().
Signed-off-by: NDon Slutz <dslutz@verizon.com>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

virtio-scsi fixes, the first part of dynamic sysbus devices,
MAINTAINERS updates, and AVX512 support.

# gpg: Signature made Mon 27 Oct 2014 15:12:13 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (28 commits)
  aio / timers: De-document -clock
  hw/scsi/virtio-scsi.c: fix the "type" use error in virtio_scsi_handle_ctrl
  virtio-scsi: sense in virtio_scsi_command_complete
  target-i386: add Intel AVX-512 support
  get_maintainer.pl: restrict cases where it falls back to --git
  get_maintainer.pl: move git loop under "if ($email) {"
  qtest: fix qtest log fd should be initialized before qtest chardev
  MAINTAINERS: avoid M entries that point to mailing lists
  MAINTAINERS: add some tests directories
  MAINTAINERS: Add more TCG files
  MAINTAINERS: add myself for X86
  MAINTAINERS: add Samuel Thibault as usb-serial.c and baum.c maintainer
  MAINTAINERS: grab more files from Anthony's pile
  target-i386: warns users when CPU threads>1 for non-Intel CPUs
  sysbus: Use TYPE_DEVICE GPIO functionality
  qdev: gpio: Define qdev_pass_gpios()
  qdev: gpio: Remove qdev_init_gpio_out x1 restriction
  qdev: gpio: delete NamedGPIOList::out
  irq: Remove qemu_irq_intercept_out
  qtest/irq: Rework IRQ interception
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The virtio-rng backend is currently linked twice, once in the proxy
device (e.g. virtio-rng-pci) and once in virtio-rng-device.  This causes
a double unref of the backend when the parent device is unplugged.

To fix this, make the proxy device use an alias, similar to what is
already being done for the iothread link.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>
Message-id: 1414577839-18695-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>